BACCI - MOD: Slot MortiserAutomatic double table round end Mortiser; Mortises or bores holes on chair, furniture or case goods.Technical Specifications -- (2) Tables & spindles; (1) table on each side to eliminate dead cycle time. -- 3 HP - 9,400 RPM Motor; spindles belt driven; 3 HP oscillation motor with: (224) Oscillations/Min; spindle movement with: Ball bushings sliding on hardened ground guides. -- Table assemblies hydraulically feed into spindles; in-and-out table adjustment between table & spindle to reduce spindle engagement time; tilting tables: +/- 20° (Side-to-side); overhead pneumatic clamp cylinders. -- 3" Max. slot depth; 4-3/8" max. slot length with: Mechanical digital readout; adjustable without wrenches; 1-15/16" max. dia. tooling, Heavy-Duty spindles with: 16 mm Chucks.

BAKER M-412 (4) Sided PlanerFour cutting modes: single, two, three, and four-sided moulding or planingSpecifications: -- Planing capacity: 13" wide by 3/8" to 9" -- 2-sided planing or moulding capacity; 13 5/8" wide by 9" tall -- 4-sided planing or moulding capacity; 12" wide by 4" tall -- Power Top horizontal spindle: One 7.5 HP (5.5 Kw) motor -- Bottom horizontal spindle: One 5 HP (3.7 Kw) motor -- Right & left spindles: Two 4.1 HP (3 Kw) motors -- Feed system: One 1/2 HP (0.375 Kw) motor -- Feed speed: Fully variable 11 to 52 fpm (3.35 to 15.85 m per minute) -- Infeed and outfeed tables are included. Infeed table has an adjustable fence

BALEMASTER - 4550G-10: Auto-Tie Horizontal BalerSpecifications: --27"; x 40"; Opening. -- 50 HP. -- 10"; Cylinder. -- 30"; x 40"; x Variable Bale.

BALEMASTER - EO-650: Horizontal Auto-Tie Baler Specifications: • 25 HP Motor.• 8"; Main Cylinder.• Hopper Opening: 46";x 50";.• Bale Size: 48"; x 30"; x (variable).• Main Ram Face Pressure: 75 PSI.• System Pressure: 2,000 PSI.• Total Compression Force: 100,500 Lbs.

Balestrini "PICO" Round End Tenoner:Specifications -- Left & right "twin" tilting tables (one table is always in the cutting position); 14" x 9" tables tilt 0ø -- 20ø, both table fences with pin stops for indexing stile and rail doors. -- Fences swivel up to 45ø, each table with vertical pneumatic holddown; -- 4 HP cutter block motor, 1 HP cutter block rotation motor, 9,000 RPM spindle speed. -- Capacity: 3-15/16" (100 mm) Max. tenon length, 1-3/16" (30 mm) max --. Thickness, and 1-31/32" (50 mm) max. depth. - Hourly production rate of (600 - 700) tenons.

BALESTRINI MINI C 2500 DOUBLE SIDED TEMPLATE PROFILE SHAPERSpecifications: -- (2) Offset shaping heads with 10 HP (7.5 kW), 230/460 volt three phase drives. (1 each side) -- Maximum reciprocating length 98" (2500 mm). -- Maximum height 7" (180 mm). -- Maximum width between spindles 8", and shaping heads are staggered for full end rounding. -- 1¼"; Diameter work arbors with 7″ under the nut capacity, and Spindle speed of 8400 RPM -- Hydraulic stroke of 9-3/4″ wide x 110″ long tee slotted work table, with feed speeds of 3 - 49 feet per minute (1-15 m/Min.) powered by 3 HP, 230/460 volt three phase hydraulic pump -- Overhead beam clamp bar with (4) adjustable clamps. -- Push button operator control station.

BALESTRINI - 2 CAP: MortiserAutomatically mortises or bores round holes in chairs or case good.Specifications -- Twin tables with: Pneumatic holddown clamps, (1) on each side eliminating dead cycle time; 19" long tables tilt left or right 0° to 20°.Equipped with & Features: -- 3 HP - 9,000 RPM Spindle motor and 1 HP oscillation motor. -- Spindles are mounted on prismatic guides with: Adjustable bronze gibs and move by rack & pinion. -- (120 - 240) Oscillations/Min; 4-23/32" max. oscillation length. -- 3-1/8" Max. depth; 7/8" max. bit dia.; 13 mm spindle collet dia.

BALESTRINI 2 CAP Mortiser --Automatically mortises or bores round holes in chairs or case good --Specifications -- Twin tables with pneumatic holddown clamps, (1) on each side eliminating dead cycle time, 19" long tables tilt left or right 0ø to 20ø. --Equipped with & Features -- 3 HP - 9,000 RPM Spindle motor and 1 HP oscillation motor. -- Spindles are mounted on prismatic guides with adjustable bronze gibs and move by rack & pinion, -- (120) to (240) oscillations/Min; 4-23/32" max. oscillation length, -- 3-1/8" max. depth, 7/8" max. bit dia., 13 mm spindle collet dia.

BARKER 600 HP BOILER, BIOMASS-FIRED: -- BARKER Boiler and Fuel System built & tested in 2011 as a pilot unit. Successful testing has been completed. This surplus equipment includes the following main features: -- Combustion Temp Capability- 2,000 deg. F.; Steam Flow 24,000 lbs/hr saturated; Steam Pressure 1,500 PSI @ 600 deg. F. -- Fuel Feed rate - 3,000 Lbs/hr at 1/4" biomass (5% moisture) -- Heat Input - 7,500 btu/Lbs HHV @ 22 mmbtu/hr. -- All equipment has less than 2,500 actual operating hours since installation.EQUIPMENT MAJOR COMPONENTS: Combustor, Cyclonic combustion technology, Refractory lined Heat Recovery. Steam Generator. Rotary Drum Dryer for Fuel drying - capable of 30% moisture reduction (at the above combustion parameters) and 1.5 tons per hour (installed as used equipment).BALANCE OF PLANT FUEL FEED SYSTEM: Live-bottom bin, Bunker, Feed conveyors, Wood hog, Vibrating screen, Drag and screw conveyors. Boiler water system - feed pump, water and steam piping Emissions Control: All required bag houses (SJVUAPCD) California permitted. -- Now REDUCED PRICE from $1.5 million !!

BECCA - 25000: 22 Liters / 6 Gallon Cap.; 2.05 kW Fully Automated Solvent Recycling SystemSpecifications -- Processes: Conventional, alternative, & waterborne solvents. -- Boiler cap.: 6 Gallons; thermic oil cap.: 3.2 Gallons. -- Heating chamber size (approx.): 14"; Dia. x 14"; dia. -- Solvent recovery rate: > 90%. -- Operating temperature: 140° - 392° F. -- Operating Pressure: -0.223 - 1 Bar Absolute; -0.776 to 0 bar relative. -- Adjustable cycle time: 3 - 5 Hrs. Equipped with: -- Dual skin AISI 304 Stainless Steel heating chamber with: AISI 304 Stainless steel pressure relief lid; replaceable solvent-resistant thermal gasket seal. -- AISI 304 Stainless steel boiler with: Indirect thermic oil bath & (2) heating elements. -- Fan cooled copper condenser system with: Aluminum non-sparking fan blade. -- Temperature/Cycle time digital touchpad control with: LED Display; self-diagnostic system; liquid & oil temperature primary electronic & backup mechanical sensors.Complete with: Installation, Start-Up & Operator's Guides.

BECKER KVT 3.100 3.6 Kw (5 HP) Vacuum pump:Oil-less (Dry) Rotary Vane Vacuum Pump System, rated at 69 CFM and 100 cm/Hr with max. 27"Hg; Heavy Duty construction, compact design, small footprint. -- 100% Oil-less vacuum pump is virtually maintenance-free with built-in carbon vanes & built-in suction filters, vacuum regulating valve, secondary suction for additional cooling, blow off valve/silencer. -- Complete WithInlet vacuum air filter system.

BECKER KVT 2.100 3.6 Kw (5 HP) Oil-less (Dry) Rotary Vane Vacuum Pump System, rated at 69 CFM and 100 cm/Hr with max. 27"Hg: Heavy Duty construction, compact design, small footprint. -- 100% Oil-less vacuum pump is virtually maintenance-free with built-in carbon vanes & built-in suction filters, vacuum regulating valve, secondary suction for additional cooling, blowoff valve/silencer. -- Complete with vacuum pump stand and double inlet vacuum air filter system.

BECKER KVT 3.100 3.6 Kw (5 HP) Vacuum pump:Oil-less (Dry) Rotary Vane Vacuum Pump System, rated at 69 CFM and 100 cm/Hr with max. 27"Hg; Heavy Duty construction, compact design, small foot print. -- 100% Oil-less vacuum pump is virtually maintenance-free with built-in carbon vanes & built-in suction filters, vacuum regulating valve, secondary suction for additional cooling, blow off valve/silencer. -- Complete WithInlet vacuum air filter system.

Becker VTLF 250 Vacuum Pump: 9.3 kW (12 HP) Oil-less (Dry) Rotary Vane Vacuum Pump System, 176 CFM, max. 25"Hg; Heavy Duty construction, compact design, small foot print. -- 100% Oil-less vacuum pump is virtually maintenance-free with built-in carbon vanes & built-in suction filters, vacuum regulating valve, secondary suction for additional cooling, blow off valve/silencer; 2-1/2" BSP x 2" NPT nipple coupled to a TEFC; 190-255/330/440V, 1,160 RPM motorNote (2) unit available and the price is for each

"BECKER" VTLF 2.250 Vacuum PumpSpecifications: -- (1) 6.4 kW (9 HP) Oil-less (Dry) Rotary Vane Vacuum Pump System; -- Pump has 169 CFM total 338 CFM max. 25"Hg; Heavy Duty construction, compact design, small footprint. -- 100% Oil-less vacuum pump is virtually maintenance-free with built-in carbon vanes & built-in suction filters, vacuum regulating valve, secondary suction for additional cooling, blowoff valve/silencer; -- 2-1/2" BSP x 2" NPT nipple coupled to a TFC; 1,150 RPM motor.

BECKER VTLF 2.250 VACUUM PUMP (OIL-FREE VANE):Specifications -- (1) 7.5 kW (10 HP) Oil-less (Dry) Rotary Vane Vacuum Pump System. -- Pump has: 169 CFM Total; 338 CFM max.; 25"Hg; Heavy-Duty construction; compact design; small footprint. -- 100% Oil-less Vacuum Pump is virtually maintenance-free with: Built-in carbon vanes & built-in suction filters; vacuum regulating valve; secondary suction for additional cooling; blow off valve/silencer. -- 2-1/2" BSP x 2" NPT Nipple coupled to a TFC; 1,150 RPM motor.

BECKER VTLF 2.250 VACUUM PUMP (OIL-FREE VANE):Specifications -- (1) 6.4 kW (9 HP) Oil-less (Dry) Rotary Vane Vacuum Pump System. -- Pump has: 169 CFM Total; 338 CFM max.; 25"Hg; Heavy-Duty construction; compact design; small footprint. -- 100% Oil-less Vacuum Pump is virtually maintenance-free with: Built-in carbon vanes & built-in suction filters; vacuum regulating valve; secondary suction for additional cooling; blow off valve/silencer. -- 2-1/2" BSP x 2" NPT Nipple coupled to a TFC; 1,150 RPM motor.

BECKER VTLF 2.250 VACUUM PUMP (OIL-FREE VANE): -- Specifications: QTY (2) 7.5 kW (10 HP) Oil-less (Dry) Rotary Vane Vacuum Pump System; -- Pump has 169 CFM total 338 CFM max. 25"Hg; Heavy Duty construction, compact design, small footprint. -- 100% Oil-less vacuum pump is virtually maintenance-free with built-in carbon vanes & built-in suction filters, vacuum regulating valve, secondary suction for additional cooling, blow off valve/silencer; -- 2-1/2" BSP x 2" NPT nipple coupled to a TFC; 1,150 RPM motor. -- Complete Becker Pump Stack, VTLF 2.250, 10HP x 2.

BELFAB RPJ26-121 Pulse Jet Dust Collector with Rotary Air Lock and Transfer Fan.Specifications: -- 15,285 CFM approx. baghouse dust collector with (121) filter bags at 10-feet long with metal cages. Total of 1,884 sq. ft of cloth area. -- Filter Cleaning: Reverse Pulse Jet (RPJ) via plant compressed air that is sequenced by diaphragm valves/solenoids/manifold thru to a Venturi that injects a burst of air pressure to dislodge the dust build up on the outside of filter bags. This is a continuous process during the operation of the dust collector. (no shut down is needed). -- Main Fan: 75 HP side-mounted blower motor. with approx 26" dia. inlet. Rated at approx 15,000 CFM @ 15" SP. -- Comes with: Main starter with control panel. -- System includes: Relay/Transfer fan, steel structure support stand, low height as waste is transferred by fan, safety ladder/platform, safety railing, and approx. 20" Rotary Air Lock. -- Housing is about 8'-5" square by about 23' high overall. Weight with structure is about 8,600 Lbs. Note: Round cone section with storage capacity of about 246 cu ft may not be included. in above height and weight. -- Available in May 2025.

PYRADIA/BELFAB BEL150 1500 5,000 CFM 15 HP Enclosureless Baghouse Dust Collector, with (3) Portable Tilting Dust BinsSpecifications: -- Total filter area 329.28 sq. ft.Equipped with: -- 15 HP - 1,770 RPM - 208-230/416-460/480V TEFC Blower, with Inlet dia. 14". -- (41) 8" dia. x 5-1/2' L Cloth filter bags. -- (6) 21" Dia. discharge openings.Complete with: -- ALLEN-BRADLEY Magnetic Starter, with Push button controls. -- (3) Portable Tilting Dust Bins.