BIESSE ROXYL 6.0 EDGEBANDER (W/PRE-MILL & CORNER ROUNDING) + "AIR FORCE" PUR/EVA GLUING TECHNOLOGY: Features: -- Latest Technology combines productivity, efficiency, and flexibility for all types of edgebanding material."AirForce" emits high temperature compressed air through a slot nozzle directly onto the reactive layer of laser banding. That layer is activated and bonds the banding to the panel fibers.This technology allows changes based on banding colors without any setup. Environmentally friendly providing a “clean - green"; technology that eliminates glue and fumes, which becomes timely & important. -- In addition, it features a conventional EVA (Hot Melt) Gluing System to cover the full range of edgebanding processes in use today!Specifications: -- Edgebanding Capacity: Edge thickness for strips min./max. 0.4 - 22 mm (0.02" - 0.87"), coiled material from 0.4 - 3 mm (0.02 - 0.12"); panel thickness from 10 - 60 mm (0.39 - 2.36"), workpiece width min. of 85 mm (3.34"); workpiece length min. 140 mm (5.51"); feed speeds 10 - 14 - 18 - 20 MPM (33 - 46 - 59 - 65 FPM). -- Machine Controls: "Roxyl-Matic" Automated machine setup, MS/Windows XP Operating System, floppy drive, and 4 GB HD; USB port, keyboard, and mouse interface. -- Flat Screen (17") with color graphics interface: Programs can be easily created and recalled at will; Graphic interface makes programming easy; icons of each unit may be brought up on the screen to show the operator the status of the unit and the parameters, which can be programmed; Edgebander may be operated manually when required, without the necessity to write a program.Machine In-Feed Configuration: -- Pre-Milling Station "FL-502": (2) LH & RH Rotating NC controlled spindles with automatic center positioning. -- Edge Magazine: Automatic for processing coiled and strip edgebanding material + a (2) position vertical Coil Magazine Cart. -- Pressure Section: Servo controlled programmable pressure section with (1) large driven roller and (4) idle rollers.Gluing System: -- EVA (Hot Melt) "QM-705": Quick premelting granulate with glue roller applicator to cover conventional edgebanding material. -- AirForce "VC-710": High pressure, hot air system to reactivate special precoated edge material (commonly referred to as laser edge).Workstations: -- End Trimming Unit "IT90-S": Front & rear trimming motors, uni-point swivel 0° - 15° bevel, programmable pneumatic change-over from flush to bevel. -- Rough/Flush Trimming Unit "RS-100": Top/Bottom pre- or flush trimming motors -- Flush/Bevel/Radius Combination Trimming Unit "RF-400": Servo controlled, (4) Servo motors (one for horizontal tool position, one for tool up/down position); using combination bevel/radius/flush insert knives; pre-positioning of motors by pneumatic air cylinders. -- Anti-Adhesive "ADZ-700" Automatic Spray Unit with: Glue release agent preventing glue to adhere to workpiece's surfaces. -- Corner Rounding Unit "CR-202": (2) Motors for front/back corner a

BIESSE/ARTECH SEKTOR 450 (SELCO SK4) FRONT LOAD, AUTOMATIC PANEL SAW: -- Specifications:Working capacity: 126" (3,200 mm) Max. rip cut cap. & 126" (3,200 mm) max. pusher stroke; 2.92" (75 mm) max. saw blade projection; 10 HP (7.5 kW) main & 3 HP (2.2 kW) scoring motor. -- Saw CarriageFeed speed from: 3 - 394 FPM (1 - 120 MPM); return speed: 394 FPM (120 MPM); automatic cutting length limiter adjusts the cutting length at the end of the workpiece; automatic saw carriage lubrication. -- Pusher Fence 196 FPM (60 MPM) Forward positioning speed; 196 FPM (60 MPM) return speed; rack & pinion movement on both sides to assure the pusher remains parallel. (6) Material gripper clamps open to 2.55" (65 mm). -- Operator Interface:PC Front End controller; 19" monitor display with real-time graphics: Virtually unlimited program storage via disk drives; function control keypad; USB & RS-232 serial port; keyboard, mouse & CD ROM drive.Diagnostic for errors or machine malfunction by means of an error signal code; incremental or absolute programming in mm or inches."Quick Opti" Software for optimization of cutting patterns directly on machine, all enclosed in an air-conditioned control cabinet. -- Complete with:Automatic side aligner device (0 - 114" stroke); automatic saw blade height adjustment; "PROLOCK" quick change blade system; (3) air support tables: 78" x 24" (1,981 x 609 mm). -- Actual Model: BIESSE/ARTECH - SEKTOR 450 (SELCO SK4)

BIESSE/ARTECH SEKTOR 470 (SELCO SK4) FRONT LOAD, AUTOMATIC PANEL SAW: -- SpecificationsWorking capacity: 149.6" (3,800 mm) Max. rip cut cap. & 149.6" (3,800 mm) max. pusher stroke; 3.54" (90 mm) max. saw blade projection; 15 HP (11 kW) main & 3.6 HP (2.6 kW) scoring motor. -- Saw CarriageFeed speed from: 3 - 394 FPM (1 - 120 MPM); return speed: 394 FPM (120 MPM); automatic cutting length limiter adjusts the cutting length at the end of the workpiece; automatic saw carriage lubrication. -- Pusher Fence 196 FPM (60 MPM) Forward positioning speed; 196 FPM (60 MPM) return speed; rack & pinion movement on both sides to assure the pusher remains parallel. (7) Material gripper clamps open to 3.34" (85 mm). -- Operator InterfacePC Front-End controller: 19" Monitor display with real-time graphics: Virtually unlimited program storage via disk drives; function control keypad; USB & RS-232 serial port; keyboard, mouse & CD ROM drive.Diagnostic for errors or machine malfunction by means of an error signal code; incremental or absolute programming in mm or inches."Quick Opti" Software for optimization of cutting patterns directly on machine; all enclosed in an air-conditioned control cabinet. -- Complete with:Automatic side aligner device: 0 to 114" Stroke; automatic saw blade height adjustment; "PROLOCK" quick-change blade system; (3) air support tables: 78" x 24" (1,981 x 609 mm). -- Actual Model: BIESSE/ARTECH - SEKTOR 450 (SELCO SK4)

BIESSE SKILL G FT 1536 FLAT TABLE MACHINE (W/ATC/BORING): -- Specifications:5' x 12' "Matrix" Grid phenolic surface for "Nested Base Manufacturing". -- Working Capacity:"X" Axis 148.2" (3,765 mm); "Y" axis 61.4" (1,560 mm); "Z" axis stroke is 12.7" (324 mm); max. material thickness 4.7" (119 mm). -- Positioning Speed:"X" & "Y" Axis 197 FPM (60 MPM); "Z" axis 65.6 FPM (20 MPM)."X" & "Y" Axes use a precision rack & pinion system; "Z" axis uses precision ball screws.All axes movement is on precision linear guides & ways and controlled by digital, brushless AC Servo motors.All motion components are maintained by an automatic lubrication system. -- Work Area:Flat table design with: "Matrix" grid phenolic surface for "Nested Base Manufacturing".(5) External pneumatic pop-up stops for piece positioning at (4) corners of workstations; automatic NC controlled 8-zone vacuum table.Prepared for (optional) "quick fit" vacuum outlets for optional clamping of small or awkward shaped parts; with "quick connect" vacuum outlet for custom vacuum pods & fixtures. -- Boring Unit:(1) 2-1/2 HP (1.7 kW) Motor; variable speed up to 6,000 RPM; Boring unit with: (10) Independent vertical spindles; (7) in "X" axis & (3) in "Y" axis. -- Machining:(1) 16 HP (12 kW) Air-Cooled "HSD" Electro-spindle with: HSK F63 Adaptor; RH & LH rotation; variable speed from 1,000 - 24,000 RPM.(1) 12-Position ride along tool changer for "on the fly" ATC. NC Controlled tool presetting for the measurement of the tool length -- Operator & Machine Control:PC Front-End with: BIESSE "BH 660" + "BiesseWORKS + "WINDOWS "WRT" (Windows Real Time) Operating System'19" LCD Flat screen monitor; Server; full keyboard & mouse all mounted on a mobile cart.Intel(R) Core i CPU; 8 GB RAM memory; 500 GB (SSHD) hard disk; dedicated graphic card; DVD reader; USB ports; Ethernet card for network connection capabilities. -- Complete with:(1) 300 m³/Hr Vacuum Pump; air-conditioned control cabinet; automatic program update according to the tool length.Automatic Lubrication system for linear guides, pads, and recirculating ball screw; universal autotransformer for voltages between 200 - 600 V, 50 / 60 Hz; teleservice capabilities; perimeter safety mats; manuals & documents on CD. -- Options Include:Prearrangement for a "C" axis at a later date. -- Actual Model is BIESSE SKILL 1536 G FT.

BIESSE SKILL G FT 1224 FLAT TABLE MACHINE (W/ RAKE/OFFLOADING): -- Specifications:4' x 8' "Matrix" grid phenolic surface for Left-Hand Feed "Nested Base Manufacturing" -- Working capacity:"X" Axis 97" (2,465 mm), "Y" axis 49.6" (1,260 mm), "Z" axis stroke is 12.7" (324 mm), max. material thickness 6.6" (170 mm), "Z" Axis clearance when using Sweep Arm 6.6" (170 mm). -- Positioning Speed:"X" & "Y" Axis 196.8 FPM (60 MPM), "Z" axis 96.4 FPM (20 MPM)."X" & "Y" Axes use a precision rack & pinion system, "Z" axis uses precision ball screws.All axes movement is on precision linear guides & ways and controlled by digital, brushless AC Servo motors.All motion components are maintained by an automatic lubrication system. -- Work area:Flat table design with "Matrix" grid phenolic surface for "Nested Base Manufacturing",The machine has (2) working areas with 2-left origins, 2-right origins, 1 front origin & 1 rear origin.External pneumatic pop-up rails with (1 LH + 1 RH) side rail stops for material positioning.Prepared for (optional) "quick fit" vacuum outlets for optional clamping of small or awkward-shaped parts; with "quick connect" vacuum outlet for custom vacuum pods & fixtures. -- Boring Unit:(1) 4 HP (3 kW) motor with variable speed up to 6,000 RPM: Boring unit with (14) independent vertical spindles, (7) in "X" axis & (7) in "Y" axis. -- Machining:(1) 16.1 HP (12 kW) Liquid-cooled "HSD Electro-Spindle" with HSK F63 adaptor, RH & LH rotation; variable speed from 1,000 - 24,000 RPM.(1) 12-Position Revolving tool changer for "on the fly "ATC", (110 mm) max tool dia. per position & 16.5 LBS (7.5 KG) max. weight per tool (including aggregates). NC controlled Tool Touch-off probe for the measurement of the tool length, max 5.1" (130 mm) tool dia. -- Operator & Machine Control:PC Front End with: Biesse "BH 660" + "Biesse WORKS " + WINDOWS "WRT" (Windows Real-Time) operating system;Air-Conditioned control cabinet, 21.5" LCD Flat screen monitor; server, full keyboard & mouse all mounted on a mobile cart.Intel(R) Core i7 CPU; 8 GB RAM memory; 128 SSD GB hard disk superior; Dedicated graphic card; DVD burner; USB ports; Ethernet card for network connection capabilities."Biesse WORKS" Graphic interface makes full use of the operating methods typical of the Windows operating system: assisted graphic editor used to program machining operations; programming and guided creation of parametric macros.Import of CAD and other external software files in DXF and CID3 format; 3D simulation of the tool path, calculation of machining time & the ability to create rotate virtual faces. -- Complete with:(1) 500 m³/Hr "BECKER" vacuum pump. Universal Auto-Transformer for voltages between 200 - 600 V, 50/60 Hz; Tele-Service capabilities; Perimeter Safety System. -- Options Include: (1) Rake system. (1) NC controlled & powered flat belt outfeed table with vacuum sweeping system. Remote hand-held control pendant/keyboard. Automatic centralized L

BIESSE SKIPPER 100 L CNC MACHINING CENTER (2-HEAD): -- Specifications:Flexible "Top & Bottom" Machining Center that uses an innovative panel handling system. -- Workable part size:"X" axis is 118" (3,000 mm), "Y" axis is 39.4" (1,000 mm), max. part thickness of 2.4" (60 mm).Min. workable part size in "X" axis is 3.5" (90 mm), "Y" axis is 2.7" (70 mm), "Z" axis is .3" (8 mm). -- Worktable:Automatic LH infeed transfer conveyor with belts & rollers, Automatic RH outfeed transfer conveyor with belts & rollers; infeed/outfeed table is "robot ready". -- Positioning Speed:"X" Axis is 394 FPM (120 MPM), "Y" axis 295 FPM (MPM), "Z" axis is 98 FPM (30 MPM). -- Boring units: (1) Top mounted boring block, 4.2 HP (3 kW), 4,000 RPM; (29) vertical spindles, (17) spindles in "X" axis & (12) spindles in "Y" axis; -- (10) Horizontal spindles, (4+4) spindles in "X" axis & (1+1) horizontal spindles in "Y" axis; -- (1) "X" axis grooving saw with 2.2 HP (1.7 kW) motor - 5,000 RPM, 150 mm dia blade. -- (1) Bottom mounted boring block, 4.2 HP (3 kW), 4,000 RPM, (29) vertical spindles, (17) spindles in "X" axis & (12) spindles in "Y" axis; -- (10) Horizontal spindles, (4+4) spindles in "X" axis & (1+1) horizontal spindles in "Y" axis; -- (1) "X" axis grooving saw with 2.2 HP (1.7 kW) motor - 5,000 RPM, 150 mm dia blade. -- Machining:(1) Top mounted 4.8 HP (3.5 kW) electro spindle, 7,000 - 18,000 RPM with RH/LH rotation; HSK D-50 adaptors for manual push button "quick-tool" change, ERC-32 tool holders & RC-32 collets. -- (1) Bottom mounted 4.8 HP (3.5 kW) electro spindle, 7,000 - 18,000 RPM with RH/LH rotation; HSK D-50 adaptors for manual push button "quick-tool" change, ERC-32 tool holders & RC-32 collets. -- Operator Interface: PC Front-End with BIESSE "NC 1000" + Windows "Biesse Work" Operating System; 15" color monitor; international keyboard with soft-touch keypad & industrial mouse.RS-232 serial ports for possible down-loading from an office PC, USB ports; (1) 48x CD ROM drive; all mounted in a separate control console with a built-in 1,500 W air conditioner for constant temperature & dust-free environment. -- Complete with:Universal transformer for voltages from 200 - 600 volts, 50/60 Hz, 3-Phase; automatic lubrication system for guides & ways; sound enclosure and complete set of safety fences/devices; machine docs & manuals. -- Options include:"BiesseWORKS Advanced" Office version with: (2) Hardware keys; pneumatic part clamping with motorized infeed & outfeed transfer conveyors; Software Disclaimer: EX-FACTORY INC. Offers NO warranty or support, written or implied concerning any/all "optional" or "additional" manufacturer or 3rd party software supplied with this machine. All software related issues including relicensing fees/requirements/functionality & training is ultimately the sole responsibility of the "Buyer".Note : Tear down and loading not included

--This machine is in an Auction on exfactoryauctions.com--NO RESERVE-- (2 Available) BIESSE SKIPPER 100 2-Head CNC Machining Center, with Infeed & Outfeed Tables – Seller states that machine was run (2) shifts from 2005 - 2021, then only a few hours per day since! Specifications: Flexible "Top & Bottom" Machining Center that uses an innovative panel handling system. Working Capacity: "X" Axis 3,000 mm (118.11"), "Y" Axis 1,000 mm (39.37"), Max. part thickness 60 mm (2.36"). Min. workable part size: "X" Axis 90 mm (3.54"), "Y" Axis 70 mm (2.76"), & "Z" Axis 8 mm (0.31"). Work Table: Left-hand infeed & Right-hand outfeed, Each with 20-1/2” x 66” x 35-1/2” H infeed & outfeed areas with Fixed caster-type conveyor rails. Positioning Speed: "X" Axis 120 MPM (393 FPM), "Y" Axis 90 MPM (295 FPM), "Z" Axis 30 MPM (98 FPM). Boring Units: (1) Top & (1) Bottom boring blocks, Each with: 3 kW (4 HP) Motor, Boring spindle speed 4,000 RPM, (29) Vertical spindles with (17) "X" Axis & (12) "Y" Axis, (10) Horizontal spindles with (4 + 4) "X" Axis & (1 + 1) "Y" Axis, & (1) "X" Axis Grooving saw with 3 kW (4 HP) Motor, Blade speed 5,000 RPM, & Blade diameter 150 mm (5.91"). Machining: (1) Top & (1) Bottom 3.5 kW (4-3/4 HP) Electrospindles, Each with: Variable spindle speeds 7,000 - 18,000 RPM, Right-hand/Left-hand rotation, HSK D-50 Adapters for Manual push-button quick tool change, ERC-32 Toolholders & RC-32 Collets. Operator & Machine Control: Mobile Control Console, with PC-Based Control, 18" LCD Monitor, BIESSE "WORKS" + "WINDOWS" Operating system. Pedestal & Pendant controls. Equipped with: Universal transformer, 200 - 600 V, 50/60 Cy, 3-Ph., Automatic lubrication system for guides & ways, Sound hood, 79" H Safety fence with Lock-out door, & TAPESWITCH "CONTROLMAT CKP" 24" x 72" Heavy-duty ribbed pressure-sensitive safety mat. Complete with: 7’ x 9’ x 35-1/2” H Infeed Table, with Rails & Pusher. 6-1/2’ x 8’ x 35-1/2” H Outfeed Table, with Transfer Belts. Handheld Bar Code Reader. Dust Manifold. Dimensions including Safety Fence: 307" x 184" x 98" H.

BIESSE SKIPPER 100 L CNC MACHINING CENTER (2-HEAD): -- Specifications:Flexible "Top & Bottom" Machining Center that uses an innovative panel handling system. -- Workable part size:"X" axis is 118" (3,000 mm), "Y" axis is 39.4" (1,000 mm), max. part thickness of 2.4" (60 mm).Min. workable part size in "X" axis is 3.5" (90 mm), "Y" axis is 2.7" (70 mm), "Z" axis is .3" (8 mm). -- Worktable:Automatic LH infeed transfer conveyor with belts & rollers, Automatic RH outfeed transfer conveyor with belts & rollers; infeed/outfeed table is "robot ready". -- Positioning Speed:"X" Axis is 394 FPM (120 MPM), "Y" axis 295 FPM (MPM), "Z" axis is 98 FPM (30 MPM). -- Boring units: (1) Top mounted boring block, 4.2 HP (3 kW), 4,000 RPM; (29) vertical spindles, (17) spindles in "X" axis & (12) spindles in "Y" axis; -- (10) Horizontal spindles, (4+4) spindles in "X" axis & (1+1) horizontal spindles in "Y" axis; -- (1) "X" axis grooving saw with 2.2 HP (1.7 kW) motor - 5,000 RPM, 150 mm dia blade. -- (1) Bottom mounted boring block, 4.2 HP (3 kW), 4,000 RPM, (29) vertical spindles, (17) spindles in "X" axis & (12) spindles in "Y" axis; -- (10) Horizontal spindles, (4+4) spindles in "X" axis & (1+1) horizontal spindles in "Y" axis; -- (1) "X" axis grooving saw with 2.2 HP (1.7 kW) motor - 5,000 RPM, 150 mm dia blade. -- Machining:(1) Top mounted 4.8 HP (3.5 kW) electro spindle, 7,000 - 18,000 RPM with RH/LH rotation; HSK D-50 adaptors for manual push button "quick-tool" change, ERC-32 tool holders & RC-32 collets. -- (1) Bottom mounted 4.8 HP (3.5 kW) electro spindle, 7,000 - 18,000 RPM with RH/LH rotation; HSK D-50 adaptors for manual push button "quick-tool" change, ERC-32 tool holders & RC-32 collets. -- Operator Interface: PC Front-End with BIESSE "NC 1000" + Windows "Biesse Work" Operating System; 15" color monitor; international keyboard with soft-touch keypad & industrial mouse.RS-232 serial ports for possible down-loading from an office PC, USB ports; (1) 48x CD ROM drive; all mounted in a separate control console with a built-in 1,500 W air conditioner for constant temperature & dust-free environment. -- Complete with:Universal transformer for voltages from 200 - 600 volts, 50/60 Hz, 3-Phase; automatic lubrication system for guides & ways; sound enclosure and complete set of safety fences/devices; machine docs & manuals. -- Options include:"BiesseWORKS Advanced" Office version with: (2) Hardware keys; pneumatic part clamping with motorized infeed & outfeed transfer conveyors; Software Disclaimer: EX-FACTORY INC. Offers NO warranty or support, written or implied concerning any/all "optional" or "additional" manufacturer or 3rd party software supplied with this machine. All software related issues including relicensing fees/requirements/functionality & training is ultimately the sole responsibility of the "Buyer".Bottom spindle or drive need to be repaired Note : Tear down and loading not included

BIESSE - SKIPPER 100 L, ...CNC Machining Center (2-Head): -- Specifications:Flexible "Top & Bottom" Machining Center that uses an innovative panel handling system. -- Workable Part Size:"X" Axis is 118" (3,000 mm); "Y" axis is 39.4" (1,000 mm); max. part thickness of 2.4" (60 mm).Min. workable part size in "X" axis is 3-1/2" (90 mm); "Y" axis is 2.7" (70 mm); "Z" axis is 0.3" (8 mm). -- Worktable:Automatic LH infeed transfer conveyor with: Belts & rollers; Automatic RH outfeed transfer conveyor with: Belts & rollers; Infeed/outfeed table is: "Robot Ready". -- Positioning Speed:"X" Axis is 394 FPM (120 MPM); "Y" axis 295 FPM (MPM); "Z" axis is 98 FPM (30 MPM). -- Boring Units: (1) Top mounted boring block: 4.2 HP (3 kW) - 4,000 RPM; (29) vertical spindles: (17) Spindles in "X" axis & (12) spindles in "Y" axis. -- (10) Horizontal spindles: (4 + 4) Spindles in "X" axis & (1 + 1) horizontal spindles in "Y" axis. -- (1) "X" Axis grooving saw with: 2.2 HP (1.7 kW) Motor - 5,000 RPM; 150 mm dia. blade. -- (1) Bottom mounted boring block: 4.2 HP (3 kW), 4,000 RPM; (29) Vertical spindles: (17) Spindles in "X" axis & (12) spindles in "Y" axis. -- (10) Horizontal spindles: (4 + 4) Spindles in "X" axis & (1 + 1) horizontal spindles in "Y" axis. -- (1) "X" Axis grooving saw with: 2.2 HP (1.7 kW) Motor - 5,000 RPM; 150 mm dia. blade. -- Machining:(1) Top mounted 4.8 HP (3.5 kW) electro-spindle; 7,000 - 18,000 RPM with RH/LH rotation; HSK D-50 adaptors for manual push button "quick tool" change; ERC-32 tool holders & RC-32 collets. -- (1) Bottom mounted 4.8 HP (3.5 kW) electro-spindle; 7,000 - 18,000 RPM with RH/LH rotation; HSK D-50 adaptors for manual push button "quick tool" change; ERC-32 tool holders & RC-32 collets. -- Operator Interface: PC Front-End with: "BIESSE Work" + Windows Operating System; 15" color monitor; international keyboard with soft touch keypad & industrial mouse.RS-232 Serial ports for possible downloading from an office PC; USB ports; (1) 48x CD ROM drive; all mounted in a separate control console with: Built-in 1,500 W air conditioner for constant temperature & dust-free environment. -- Complete with:Universal transformer for voltages from: 200 - 600 Volts, 50/60 Hz, 3-Phase; automatic lubrication system for guides & ways; sound enclosure and complete set of safety fences/devices; machine docs & manuals.

BIESSE SPARK 3.3 Edgebander (Compact)0.4 mm to 3 mm material thickness. Min. panel thickness 10 mm, max. panel thickness 40 mm. Min. panel width 90 mm, min. panel length 140 mm.Equipped with: -- 2 Liter Glue Teflon coated tank with quick heating system. -- Top pressure beam with manual adjustment through numerical read-out equipped with rubberized holddown wheels. -- Pneumatic Guillotine knife for automatic edge cutting with a max thickness of 3 mm with automatic “kickback"; of the edge. -- Adjustable edge pressure unit with (2) rollers: 1st roller motorized with separate adjustable pressure system; 2nd idle roller with separate adjustable pressure system. Work stations: -- Double Motor End Trimming Unit - 2 tilting motors HF 0.5 HP each. -- Top and bottom Trim with (2) HF motors, 0.75 HP (0.55 kW) each and micrometric adjustment with numerical read-out. Cutters with 3 mm radius with (4) knives. -- Top and bottom Buffing station. -- Material feed speed 12 MPM (39 FPM).

BIESSE SPARK 3.3 Edgebander (Compact)0.4 mm to 3 mm Material thickness. Min. panel thickness 10 mm, max. panel thickness 40 mm. Min. panel width 90 mm, min. panel length 140 mm.Equipped with: -- 2 Liter Glue Teflon coated tank with quick heating system. -- Top pressure beam with manual adjustment through numerical read-out equipped with rubberized holddown wheels. -- Pneumatic Guillotine knife for automatic edge cutting with a max thickness of 3 mm with automatic “kickback"; of the edge. -- Adjustable edge pressure unit with (2) rollers: 1st roller motorized with separate adjustable pressure system; 2nd idle roller with separate adjustable pressure system. Workstations: -- Double Motor End Trimming Unit - 2 tilting motors HF 0.5 HP each. -- Top and bottom Trim with (2) HF motors, 0.75 HP (0.55 kW) each and micrometric adjustment with numerical read-out. Cutters with 3 mm radius with (4) knives. -- Top and bottom Buffing station. -- Material feed speed 12 MPM (39 FPM).

BINKS - COMET 3, ...Paint PumpMounted on a roll-around cart.

BISHAMON L2K-2848 Scissor Lift Unparalleled price for a 2,000 Lbs. cap. lift w/ a 24" x 48" smooth top. -- Complies with ANSI standards for lift tables. -- Heavy duty NEMA 12 hand control is rated for 120 volt, 25 amp operation. -- New heavy duty unitized power unit operates on a standard household 115 volt outlet. -- New power unit eliminates previous duty cycle restrictions and operates at low hydraulic pressure (1,500 PSI). -- New 3" bore cylinder provides smooth gravity down operation. -- Cylinder flow limiting valves protects the operator in the event of a hydraulic line failure. -- See through reservoir for easy fluid level identification. -- Hinged maintenance catches painted safety yellow. -- Entrapped scissor rollers for increased stability. -- Dual powder coated finish.

BISHAMON L2K-3648 Scissor LiftUnparalleled price for a 2,000 Lbs. cap. lift w/ a 36" x 48" smooth top. -- Complies with ANSI stardards for lift tables. -- Heavy duty NEMA 12 hand control is rated for 115 volt, 25 amp operation. -- New heavy duty unitized power unit operates on a standard household 115 volt outlet. -- New power unit eliminates previous duty cycle restrictions and operates at low hydraulic pressure (1,500 PSI). -- New 3" bore cylinder provides smooth gravity down operation. -- Cylinder flow limiting valves protects the operator in the event of a hydraulic line failure. -- See through reservoir for easy fluid level identification. -- Hinged maintenance catches painted safety yellow. -- Entrapped scissor rollers for increased stability. -- Dual powder coated finish.

BISHAMON L3K-2848 Scissor LiftUnparalleled price for a 3,000 Lbs. cap. lift w/ a 28" x 48" smooth top. -- Complies with ANSI standards for lift tables. -- Heavy duty NEMA 12 hand control is rated for 120 volt, 25 amp operation. -- New heavy duty unitized power unit operates on a standard household 115 volt outlet. -- New power unit eliminates previous duty cycle restrictions and operates at low hydraulic pressure (1,500 PSI). -- New 3" bore cylinder provides smooth gravity down operation. -- Cylinder flow limiting valves protects the operator in the event of a hydraulic line failure. -- See through reservoir for easy fluid level identification. -- Hinged maintenance catches painted safety yellow. -- Entrapped scissor rollers for increased stability. -- Dual powder coated finish.

BISHAMON L3K-3648 Scissor LiftUnparalleled price for a 3,000 Lbs. cap. lift w/ a 36" x 48" smooth top. -- Complies with ANSI standards for lift tables. -- Heavy duty NEMA 12 hand control is rated for 120 volt, 25 amp operation. -- New heavy duty unitized power unit operates on a standard household 115 volt outlet. -- New power unit eliminates previous duty cycle restrictions and operates at low hydraulic pressure (1,500 PSI). -- New 3" bore cylinder provides smooth gravity down operation. -- Cylinder flow limiting valves protects the operator in the event of a hydraulic line failure. -- See through reservoir for easy fluid level identification. -- Hinged maintenance catches painted safety yellow. -- Entrapped scissor rollers for increased stability. -- Dual powder coated finish.

BISHAMON L5K-3256 Scissor Lift32" x 56" 5,000 Lbs cap. Lift with a lowered height 8.75", raised height 48", travel 39.25". ~~ Up time 50 seconds, lowered time 24 seconds. -- Complies with ANSI standards for lift tables. -- Heavy duty NEMA 12 hand control is rated for 115 Volt, 25 amp operation. -- New heavy duty unitized power unit operates on a standard household 115 Volt outlet. -- New power unit eliminates previous duty cycle restrictions and operates at low hydraulic pressure (1,500 PSI). -- 3" Bore cylinder provides smooth gravity down operation. -- Cylinder flow limiting valves protect the operator in the event of a hydraulic line failure. -- See through reservoir for easy fluid level identification. -- Hinged maintenance catches painted "safety yellow." -- Entrapped scissor rollers for increased stability. -- Dual powder coated finish.

BISHAMON L5K-4872 Scissor LiftUnparalleled price for a 48" x 72" 5,000 Lbs cap. lift. Specifications: -- Lowered height 8.75", raised height 48", travel 39.25". Up time 50 Sec, lowered time 24 Seconds. -- Complies with ANSI standards for lift tables. -- Heavy duty NEMA 12 hand control is rated for 115 volt, 25 amp operation. -- New heavy duty unitized power unit operates on a standard household 115 volt outlet. -- New power unit eliminates previous duty cycle restrictions and operates at low hydraulic pressure (1,500 PSI). -- New 3" bore cylinders provide smooth gravity down operation.Features: -- Cylinder flow limiting valves protects the operator in the event of a hydraulic line failure. -- See through reservoir for easy fluid level identification. -- Hinged maintenance catches painted safety yellow. -- Entrapped scissor rollers for increased stability. -- Dual powder coated finish.

BISHAMON L5K-4884 Scissor LiftUnparalleled price for a 48" x 84" 5,000 Lbs. cap. lift. Specifications: -- Lowered height 8.75", raised height 48", travel 39.25". Up time 50 Sec, lowered time 24 Seconds. -- Complies with ANSI standards for lift tables. -- Heavy duty NEMA 12 hand control is rated for 115 volt, 25 amp operation. -- New heavy duty unitized power unit operates on a standard household 115 volt outlet. -- New power unit eliminates previous duty cycle restrictions and operates at low hydraulic pressure (1,500 PSI). -- New 3" bore cylinders provide smooth gravity down operation.Features: -- Cylinder flow limiting valves protects the operator in the event of a hydraulic line failure. -- See through reservoir for easy fluid level identification. -- Hinged maintenance catches painted safety yellow. -- Entrapped scissor rollers for increased stability. -- Dual powder coated finish.

BISHAMON LX-200WM Scissor Lift 4,400 Lbs. load capacity. -- 45-1/2" x 61-1/2" Platform. -- 4.3" Lowered height. -- 35.1" travel to raised height of 39.4". -- 34-Second upward travel time when loaded. -- 26-Second downward travel time. -- Electro-hydraulic. -- 1 HP TENV Motor. -- Hand control with 8' long cord. -- Options: Foot switch and long loading ramp. Please ask for pricing.