WEIMA WL-10 Vertical Hopper Low Noise Grinder:39" x 47" Hopper opening (straight sided with flared top section), 1.3 cu. yds. capacity.Equipped with: -- 368 mm (14-3/4") rotor dia.; 60 - 120 RPM rotor speed; 40 HP motor. -- Patented "V-ROTOR" design utilizes a V-groove rotor closely matched to grooves in the counterknife (40 x 40 mm), (2) Rows of knives to ensure uniform discharge free of splinters; adjustable counter knife for maximum reduction of cutting gap; reduce friction, and dedicate more horsepower to grinding. -- (52) Replaceable back bolt-on cutter knives, recessed concave cutters with low clearance over the rotor extend cutter life, protect the bolts, and reduce machine wear..Complete with: -- HMI Operator Interface mounted in a stand alone NEMA 12 electrical enclosure. -- 8" Dia. dust collection outlet (1,900 CFM required); 1/2" interchangeable screen. -- Output depends on screen size, material density, and moisture content; hydraulic ram optimizes feed pressure by monitoring rotor motor amperage. -- Extented upper 5' X 7'Note: Approximately (1,200) Lbs/Hr output with 1/2" screen.

WEIMA - Woodchuck: Low Noise Slow Speed Vertical Wood Waste GrinderLow cost/investment solution for Woodwaste disposal - feasible for a small shop.Specifications -- 25 HP Main Drive motor; 24" x 41" hopper opening; 0.74 cu. yds cap; 10" dia. rotor, 100 RPM. -- Equipped with: -- (28) 40 mm x 40 mm Concave; indexable cutters; 6" discharge outlet. -- Features -- Patented V-ROTOR design utilizes tooling closely matched to grooves in the counter knife. -- V-ROTOR Produces: Uniform discharged material; free of splinters; dedicates more horsepower to grinding. -- Includes -- 5/8" or 3/4" Screen (TBD); integrated "plug-and-play" electrical control system with: UL Approved components. -- Options Include -- Powered Screw Chip extraction system as pictured.

WEIMA WLH-400 Horizontal Low-Speed Grinder with 16' Vibratory Infeed ConveyorEquipped with: -- 30 HP Rotor motor; 14.5" Dia. rotor with (22) 4-way indexable, replaceable cutter knives 40 mm X 40 mm, 1-piece counter bed knife, rotor/cutterhead grinding speed 500 - 600 RPM. -- Features: -- Top infeed roller, Heavy Duty Industrial Grade construction with stress-relieved shell and frame; Heavy Duty outboard roller bearings; separate electrical control panel with "soft start" starter. -- Complete with: -- 10" dia. collection outlet 3,000 CFM required. -- Includes: -- 14" Wide x 12' long vibrating infeed conveyor. -- Grinding capacity of 900 to 1,500 lbs/hour.

BISHAMON L5K-4884 Scissor LiftUnparalleled price for a 48" x 84" 5,000 Lbs. cap. lift. Specifications: -- Lowered height 8.75", raised height 48", travel 39.25". Up time 50 Sec, lowered time 24 Seconds. -- Complies with ANSI standards for lift tables. -- Heavy duty NEMA 12 hand control is rated for 115 volt, 25 amp operation. -- New heavy duty unitized power unit operates on a standard household 115 volt outlet. -- New power unit eliminates previous duty cycle restrictions and operates at low hydraulic pressure (1,500 PSI). -- New 3" bore cylinders provide smooth gravity down operation.Features: -- Cylinder flow limiting valves protects the operator in the event of a hydraulic line failure. -- See through reservoir for easy fluid level identification. -- Hinged maintenance catches painted safety yellow. -- Entrapped scissor rollers for increased stability. -- Dual powder coated finish.

BISHAMON L5K-4872 Scissor LiftUnparalleled price for a 48" x 72" 5,000 Lbs cap. lift. Specifications: -- Lowered height 8.75", raised height 48", travel 39.25". Up time 50 Sec, lowered time 24 Seconds. -- Complies with ANSI standards for lift tables. -- Heavy duty NEMA 12 hand control is rated for 115 volt, 25 amp operation. -- New heavy duty unitized power unit operates on a standard household 115 volt outlet. -- New power unit eliminates previous duty cycle restrictions and operates at low hydraulic pressure (1,500 PSI). -- New 3" bore cylinders provide smooth gravity down operation.Features: -- Cylinder flow limiting valves protects the operator in the event of a hydraulic line failure. -- See through reservoir for easy fluid level identification. -- Hinged maintenance catches painted safety yellow. -- Entrapped scissor rollers for increased stability. -- Dual powder coated finish.

BISHAMON L5K-3256 Scissor Lift32" x 56" 5,000 Lbs cap. Lift with a lowered height 8.75", raised height 48", travel 39.25". ~~ Up time 50 seconds, lowered time 24 seconds. -- Complies with ANSI standards for lift tables. -- Heavy duty NEMA 12 hand control is rated for 115 Volt, 25 amp operation. -- New heavy duty unitized power unit operates on a standard household 115 Volt outlet. -- New power unit eliminates previous duty cycle restrictions and operates at low hydraulic pressure (1,500 PSI). -- 3" Bore cylinder provides smooth gravity down operation. -- Cylinder flow limiting valves protect the operator in the event of a hydraulic line failure. -- See through reservoir for easy fluid level identification. -- Hinged maintenance catches painted "safety yellow." -- Entrapped scissor rollers for increased stability. -- Dual powder coated finish.

BISHAMON L2K-2848 Scissor Lift Unparalleled price for a 2,000 Lbs. cap. lift w/ a 24" x 48" smooth top. -- Complies with ANSI standards for lift tables. -- Heavy duty NEMA 12 hand control is rated for 120 volt, 25 amp operation. -- New heavy duty unitized power unit operates on a standard household 115 volt outlet. -- New power unit eliminates previous duty cycle restrictions and operates at low hydraulic pressure (1,500 PSI). -- New 3" bore cylinder provides smooth gravity down operation. -- Cylinder flow limiting valves protects the operator in the event of a hydraulic line failure. -- See through reservoir for easy fluid level identification. -- Hinged maintenance catches painted safety yellow. -- Entrapped scissor rollers for increased stability. -- Dual powder coated finish.

BISHAMON L2K-3648 Scissor LiftUnparalleled price for a 2,000 Lbs. cap. lift w/ a 36" x 48" smooth top. -- Complies with ANSI stardards for lift tables. -- Heavy duty NEMA 12 hand control is rated for 115 volt, 25 amp operation. -- New heavy duty unitized power unit operates on a standard household 115 volt outlet. -- New power unit eliminates previous duty cycle restrictions and operates at low hydraulic pressure (1,500 PSI). -- New 3" bore cylinder provides smooth gravity down operation. -- Cylinder flow limiting valves protects the operator in the event of a hydraulic line failure. -- See through reservoir for easy fluid level identification. -- Hinged maintenance catches painted safety yellow. -- Entrapped scissor rollers for increased stability. -- Dual powder coated finish.

BISHAMON L3K-2848 Scissor LiftUnparalleled price for a 3,000 Lbs. cap. lift w/ a 28" x 48" smooth top. -- Complies with ANSI standards for lift tables. -- Heavy duty NEMA 12 hand control is rated for 120 volt, 25 amp operation. -- New heavy duty unitized power unit operates on a standard household 115 volt outlet. -- New power unit eliminates previous duty cycle restrictions and operates at low hydraulic pressure (1,500 PSI). -- New 3" bore cylinder provides smooth gravity down operation. -- Cylinder flow limiting valves protects the operator in the event of a hydraulic line failure. -- See through reservoir for easy fluid level identification. -- Hinged maintenance catches painted safety yellow. -- Entrapped scissor rollers for increased stability. -- Dual powder coated finish.

BISHAMON EZ LOADER Rotating Scissor LiftSelf-Leveling capacity range of 250 - 3,500 Lbs. Max. load capacity is 4,000 Lbs. Collapsed capacity range. -- 10-1/2" Lowered height, 21-1/4" travel, 30" raised height. -- 43" Dia. rotating circular platform. -- Secured ball bearing center pivot on rotator ring along; entrapped rollers in base for smooth even rotation. -- FIRESTONE Air stroke actuator to automatically decrease platform height according to the weight on it. -- No mechanical springs; captivated air to pressurize the air stroke actuator; bleed valve for capacity adjustments. -- Easy to move by forklift without the need for forklift pockets, weight 500 Lbs.

BISHAMON LX-200WM Scissor Lift 4,400 Lbs. load capacity. -- 45-1/2" x 61-1/2" Platform. -- 4.3" Lowered height. -- 35.1" travel to raised height of 39.4". -- 34-Second upward travel time when loaded. -- 26-Second downward travel time. -- Electro-hydraulic. -- 1 HP TENV Motor. -- Hand control with 8' long cord. -- Options: Foot switch and long loading ramp. Please ask for pricing.

BLUE GIANT SFSRH33/575 Scissor LiftHydraulic 3,000 Lbs. scissors lift -- 34" x 108" platform with idle roller -- Low 9" x high 53",Hydraulic pumping unit with 3 HP motor.

BOILERSMITH 400 HP BOILER, WOOD-FIRED -- Wood-Fired BOILERSMITH Boiler fitted with CHALLENGER Combustion Unit. -- Complete with the following major components and features: -- 250 PSIG design pressure. -- BOILERSMITH Boiler Model HRT2H8-2600SF-XW-250 with 2600 Sq. Ft. boiler surface area. -- Fuel can vary in moisture up to 50%. (Boiler HP is reduced as moisture increases.) -- Fuel feed Auger with Variable Frequency Drive. -- Fire-Tube Boiler with integrated Air Blast Tube Cleaning. -- De-Ash Augers. -- All Electrical Controls and starters. -- All mechanical/electrical engineer's drawings.NOTES: Removed and ready to load onto two trucks, 38,000 and 42,000 pounds. 15,000 to 16,000 pounds per hour steam if burning wood pellets. No building included but same building can be purchased from STAR.

BREWCO - BBBH, ...6-Head Horizontal ResawComplete with the following Features & Specifications: -- Working Dimensions: 6" Wide x 8" high capacity and length 21" to 72". -- Band: 13'-2" x 1-1/4" x 0.035 Blade provides thin kerf savings; Quick & easy blade height adjustments. -- Wheel diameter: 28" Dia.; CNC machined; dynamically balanced; all steel. -- Belting: Rough top feed belt combines with opposing side feed rolls. -- Saw Motors: 20 HP High Efficiency, 3-Phase electric motor on each head. -- Variable feed speed conveying: 5 HP Hydraulic drive from 20 - 120 FPM (6 - 36 MPM).

BREWER - Single-Head, ...Horizontal ResawWith the following features: -- 15 HP Motor. -- 6-1/2" Wide x 6-1/2" thick resaw cap. -- 2-Belt drive; 36" working height from the floor. -- Variable speed hydraulic drive with: Top and bottom powered tire and belt; 30" dynamically balanced band wheels at 900 RPM for vibration free running. -- 1" or 1-1/4" Wide bands.NOTE: No Return Conveyor System.

BREWER GE 2000-3B 3-Head Horizontal ResawSpecifications: -- Cant capacity 8" W x 12" H x Random length, Saw kerf 0.083". -- Blade wheel size 36" Diameter x 2" W, Blade length 198", Blade width 1", 1-1/4";, 1-1/2"; or 2". -- Hydraulic variable feed speeds 20 to 100 FPM.Equipped with: -- (3) 20 HP Saw head motors, Rough-top feed belt. -- Steering wheel blade tracking, Hydraulic blade level adjustment.

CAM-WOOD TRS 150F Frame SawCAM-WOOD Frame Saws are engineered and designed to make extremely accurate cuts, cutting products with very tight tolerances up to 0.004" and often eliminating sanding before proceeding to the next step . The unique thin frame saw design accepts different saw frames, blade combinations, and allows multiple saw fence configurations to produce single, double or multiple cuts in a single pass.Specifications: -- 3/4" Min. to 6" max. working width; 1-1/4" min. to 7-3/4" max. working thickness (height); 7-1/2" minimum length; finished material > 0.1094". -- 0.043" to 0.055" Saw blade thickness; runs up to (22) blades at one time at (450) stroke/minute with a 8-1/4" stroke length; accommodates blades 1.575" wide x 19.685" long. -- Saw blade frame is powered by a 15 HP motor. Feed speeds of 1 to 5 FPM by 1 HP motor. -- Features automatic oil lubrication system requiring 90 PSI air pressure. Cooling system via water and air. -- Minimum kerf multi-blade frame saw designed to maximize production and minimize material losses to kerf. -- Machine supplied with PLC controller to allow operator fast, instant set-up changes. -- All controls are centrally located for the operator to easily adjust & control operation. -- Material waste reductions of up to 20% are achievable by use of the thin kerf blades (0.043" ~ 0.055"). -- A special air blast system cools the blade for longer service intervals and removes saw dust from the gullet of the blade to reduce temperature and increase blade life.Note: Frames are available in different configurations.

CAM-WOOD ST-3VFD Variable Speed 3-Roller Feeder -- With the powerful feeding strength, one can freely & simply assemble, dismantle & adjust it. It may be installed onto the circular saw, shaper, sander, router, planer serving as one’s invisible third hand at work. -- There are three (3) feed rollers on this feeder. Each roller has a suspender to hold simultaneously the workpiece at different degrees of thickness. It is also used to help the feed pressure. In case you need a large space between the rollers, you can take off the middle roller so the remaining rollers may be used for curve driving. Feeding Speed: 10 - 79 FPM (VAR). -- For spindle molder, the feeder may be adjusted to the leveling direction for side feed to meet the requirement of various processing condition. -- There are two (2) sets of matching & interchangeable gears of variable sizes to create for stages of feeding speed. -- Forward & reverse feeding switch. -- Universal support stand with cast iron base, main bracket, thick refaced column and aluminum hand wheels for vertical and horizontal positioning.

CAM-WOOD RS-640X Radial Arm Saw Sturdy cast iron frame for saw head and arm.Specifications: -- 4 HP motor; 4-1/8" cutting depth with 14" dia. blade; 43" max. trimming width x 24" max. crosscut. Equipped with: -- Laser Light, magnetic starter, and overload protection. -- Positive locking device for tilting. -- Saw head that glides on ball-bearings against a hardened steel surface; spring-loaded saw head return. -- Large 44" x 33-3/4" wooden table. -- Heavy gauge steel base and legs for solid support. Features: -- 0° - 180° Saw head rotation (horizontal); 0 - 90° head tilting (vertical), with positive locks on a rotating head. Includes: -- Upper & lower blade guards and anti-kickback attachment; 2" dust pick-up.

CAM-WOOD RS-660X Radial Arm SawSturdy cast iron frame for saw head and arm.Specifications: -- 4.5 HP Motor; 5-1/8" cutting depth with 16" dia. blade; 45" max. trimming width x 35" max. crosscut. -- Large 32" x 45" wooden table. -- Magnetic starter and overload protection. -- 0° - 180° Saw head rotation with positive locks on rotating head. Features & Equipped with: -- Saw head that glides on ball-bearings against a hardened steel surface. -- Heavy gauge steel base & legs for solid support. -- Positive locking device for tilting. -- Motor brake, upper & lower blade guards, and anti-kickback attachment. -- Dado Option: Dado capacity 1" wide, 10" blade, 1" bore.... please inquire about the extra cost.