MURPHY-RODGERS - HEC-216-S/10: 33,000 CFM Continuous Duty Automatic Self-Cleaning Pulse Jet Baghouse Dust CollectorEquipped with: -- (216) 5" Dia. x 10' L Cloth filter bags for a total of: 2,827 sq/ff. of filter area. -- (2) 42-1/2" W x 68" H & (2) 40-1/2" x 68" H Top access doors. -- (3) Front & (2) side 27" W x 54" H Filter access doors. -- (2) Square cone bottom hoppers each with: 25" x 25" Discharge openings. -- System utilizes: (2) 4-1/2’ x 6’ x 4’ H Waste containers (NOT included). -- CHICAGO 100 HP - 1,780 RPM Roof Mounted Blower with: 41"; Dia. inlet. -- Motorized dampers for winter & summer modes. -- Winter mode: Directs air back into building, reducing heat loss. -- Summer mode: Directs air outside, cooling building. -- Electrical controls (as pictured). VFD needs to be repaired or replaced.Complete with: -- Spare Filter Bags.NOTE: Installed Used in 2016 with "New" 100 HP motor, new bearings in blower & "New" spring mounts.

MURPHY-RODGERS MRJ-610-122 Pulse Jet Dust Collector with Rotary Air Lock and Transfer Fan.Specifications: -- 8,500 CFM approx. @ 9 to 1 air to cloth ratio baghouse dust collector with (60) 10-feet long filters; total cloth area of 943 sq. ft. -- Filter Cleaning: Continuous Self-cleaning Using Compressed Air. -- Main Fan: 30 HP top-mounted blower motor. with approx 18" dia. inlet. --System includes: Relay/Transfer fan, steel structure support stand, low height as waste is transferred by fan, safety ladder/platform, top safety railing, and approx. 16" Rotary Air Lock.Actual model is MRJ 610 -122.

MURPHY-RODGERS - MRSE-14-RAL: Baghouse Dust CollectorSpecifications: 14" Inlet dia.; 4,836 CFM; (63) bags with: 520 Sq./ft. filter area; 9.3:1 air-to-cloth ratio; 20 HP fan motor; primary separator built into unit; secondary separation of fine particles by filter bag section; -- Equipped with: -- Rotary Air Lock. -- Fully automatic shaker controls with: Electric shaker as standard; consists of panel box with shaker starter; transformer for 115 V circuitry; solid-state timer for fan deceleration & shaking cycle. -- All necessary relays and internal wiring inside the panel box.

MURPHY-RODGERS MRSE-24 RAL Dust Collector Loaded with features -- General Data: Self-contained baghouse, approx 15,000 CFM with 1,913 sq. ft. of filter area based on 7.8 to one Air-to-Cloth-Ratio. -- Fan/Motor: 40 HP Baldor motor, 22" dia. inlet, primary separator built into the unit, secondary separation of fine particles by filter bags. -- Equipped with: 16" dia. bottom dump outlet controlled by a Rotary Air Lock with approx. 18" dia. discharge outlet. -- Complete with: (2) Electric motor driven automatic bag shakers, angle frame truck height support stand with walkway platform and full height ladder to access top of unit. Fan/motor mounted on top of the collector -- Includes: Magnetic Starter, Control Panel, Silencer, and Explosion doors. -- Approx. dims.84" x 85" x 32' High; 6,100 Lbs

MURPHY-RODGERS - MRT-12 AS, ...Dust Collector (Interior) -- Specifications:Motor: TEFC 10HP, 230/460, 3 PH; Inlet diameter: 12"; Collection Outlet Opening: 11″; (1) Four (4) bag unit; 3,500 CFM. -- Floor space: 62" Wide x 102" deep x 118" high. -- NOTE: (4) Barrels (as pictured) are included!

7.5 HP TEFC BALDOR Motor, 2,960 CFM at 6" W.G., free-standing interior unit, designed for (6) filter bags mounted over two plastic waste bags or barrels for waste collection. -- 10" Inlet dia.; 128 sq. ft. filter area, 66 cu. ft. storage cap.; quick clamp barrel removal. -- It comes with barrels and bags as shown. -- Overall height is 129"; requires 26" x 108" floor space..Magnetic Starter included

DONALDSON TORIT - 232 RF-8, ...24,000 CFM Baghouse Dust Collector (refurbished 2017) with: Rotary Air Lock & AIRCOM 32" Dia. Explosion Isolation Flap Valve (New 2017) -- Specifications. Approx. 10-1/2' Dia. x 24' H Baghouse with: 7-1/2' H Cone bottom & (232) 8' L cloth filter bags totaling appx. 2,414 sq./ft. of cloth area.Air-to-cloth ratio: 9.94:1; Overall system footprint: 25' x 25'. -- AIRCOM - SNR 800. ...32" Dia. SNR (Safety Not Return) Explosion Isolation Flap Valve: S/N 0977003 (2017); certified ATEX EN 15089; Class 2, NFPA Compliant with: Max. air speed 30 m/s; max. dust concentration: 4 LEL; Kst max. 299 bar m/s; pred. max. 0.25 bar, Pmax. 9 bar; Pipe structure to withstand pressure: 0.25 bar; Explosion resistance of flap 850 mbar;, Min. ignition energy 3 - 10 mJ; Min. ignition temperature 420° C (788° F); Temperature range: –20° C to +60° C (-4° f to 140° F); Range of applicable volumes: 10 - 60 cu. meters (33 - 196 cu./ft.); Anti-opening locks on both flaps. -- 75 HP - 1,780 RPM, TEFC Motor Driving Blower: Rated at 24,000 CFM @12" SP with: 36" Dia. inlet & 30" x 36" outlet. -- KOGER - SIZE 12, ...Rotary Air Lock with: 12" Dia. inlet & outlet 1 HP Motor. -- MURPHY-RODGERS - MRT-12, 10 HP Blower: S/N 1272 with 12" dia. inlet & 8" x 11" outlet. -- ROOTS - 32 U-RAI, ...5 HP Lobe Blower: S/N 0802963165. -- Electrical controls included. -- Actual model is: "232FRW8" (Walk-in unit); estimated shipping weight: 15,500 Lbs. -- Available 1st wk in July or sooner if needed.

TYLER 2400 SLAT-WALL MACHINE: -- Specifications:Produces T-slots "Slat-Wall" for architectural/store fixture panels.48" x 97" Max. panel capacity., 24" x 24" min. cap., panel thickness 0.5" to 1.5". Machine capable of processing up to (40) panels/Hr, depending on material density, thickness and the slot profile. -- Equipped with:This machine is currently set up with (18) router spindles on 3" centers,Spindles are driven in groups of (3) with (6) 7.5 HP - 3,450 RPM motors that drive the (18) router spindles, all router spindles rotate @ 15,400 RPM.This machine can accept up to (21) router spindles & the additional spindles can be activated by adding (1) additional 7.5 HP - 3,450 RPM motor. -- Machine Operating Sequence:Panels remain stationary on top, pneumatically clamped in place while the bottom mounted router bank traverses the full length of the panel with a high-speed return,Variable feed speed control, router assembly traverses on ground & polished rails with chain drive.Panels are positioned along the 8' rear edge fence line, distance from the panel edge to the centerline of the 1st cut can be adjusted from 0.0" - 3" (1 router spindle pitch). -- Operator & Machine Control:Allen Bradley electrical controls for the machine cycle and a "setup" mode of operation.Machine cutting cycle is initiated by a 2-hand operator safety buttons located on the right front of machine. -- Complete with:Overhead hold-down assembly with (2) large air cylinders and (6) arms with spring loaded clamping pads hold the panel in place.Panels are loaded from the 8' front and exit to the side for easy unloading. -- Options Include: An assortment of used "Diamond Tooling" (diamond router bits) An assortment of extra motors spare parts service manual & docs. -- Actual Model is TYLER 2400

UAS -BHT (CALCOR) MIB-11-T19- SVA Pulse Jet baghouse dust collector. MIB is Modular Industrial Baghouse. -- Has qty (18) each of filter cartridge # 04007500 (6.125 x 75") and qty (18) each of filter cartridge # 0400000249 (6.125 x 41.6250"), for a total 1,896 sq. ft with pleated Spunbonded Polyester w/PPTFE filter bags. -- OEM rated for 5,000 ACFM @ 11" SP, resulting in a 2.64 Air-to-cloth ratio. -- 20 HP Siemens motor, on a large floor-mounted blower -- Comes with DPC and Timer board for Pulse Cleaning Control. Allen Brady Starter and air quality motoring. -- Discharges thru Pyramid hopper into a 55 Gallon Drum. Includes dome style explosion vent.. -- Housing dimensions: 60" x 60" x 232" high. Total weight with filters: 3800 Lbs. -- Looks like its brand new. -- Last used for a CNC Laser Cutter.

UMP - BP 450 A: 450 kG/Hr Briquette PressSpecifications: -- Cap. 450 kG/Hr (992 Lbs). -- Max. pressure: 1,700 kG/cbm (24,175 PSI). -- Max. chip moisture content: 15%. -- Max. chip size: 15 mm (0.59"). -- Wood shaving to briquette ratio: 10 to 1 (using mahogany). -- Briquette configuration: Rectangular. -- Briquette length: 40 - 105 mm (1.57" - 4.13"); Briquette width 150 mm (5.91"); Briquette height: 60 mm (2.36"). -- Briquette heat energy: 4,200 kCal/kG (7,558 BTU/Lbs). -- Hopper size: 31"; x 36"; x 36"; with: 1-Side sloping so cutaway from cube of 18"; x 36";; mounting flange at top allows additional capacity to be added.Equipped with: -- Automatic material density adjustment. -- Automatic hopper shutoff. -- SIEMENS PLC Control.

100HP Single Shaft Shredder With Infeed and Discharge ConveyorsSpecifications: --100 HP --Includes Infeed Conveyor- 50" Wide x 37’6"; Long, Sides 20"; high --Includes Discharge Conveyor - 47" Wide x 16' Long

Portable Tire Shredder with: Grapple -- DETROIT Diesel motor. -- NOTE: Needs hydraulic hoses replaced.

(2) Forklift Fork Extensions -- Length 72";, Width 7" -- Accommodates 4", 5" and 6" opening, Weight: 72 Pounds.

UNTHA RS40-1000-37 QUAD SHAFT SHREDDER -- 1000 mm (39") cutting chamber -- (2) 30 HP motors -- 480 volts UL controls -- Wear lined, cast steel sidewalls -- 29 mm cutting system with 2 tooth main cutters -- Mechanical seals -- 60 mm screen with Hardox baskets -- Shimmed screen for position control -- Automatic central lubrication -- Quick change screen -- Brand new with warranty -- Loaded on your truck

UNTHA RS 30 QUAD SHAFT SHREDDERSpecifications: --Conveyor Brand Battery Recycling System 2,000 LB --UPENDER SCISSOR Lift Table HYDRAULIC Discharge Conveyor -- 30hp -- Auto Reverse push button controls -- Base support structure -- Feed Hopper -- Unique 4-shaft design & integrated screen process. -- Most materials in one pass, where other machines require multiple stages of processing

UNTHA RS 40 QUAD SHAFT SHREDDERSpecifications: -- 60hp -- 40" x 30" Opening -- Auto Reverse push button controls -- Base support structure -- Feed Hopper -- Unique 4-shaft design & integrated screen process. -- Most materials in one pass, where other machines require multiple stages of processing -- Approx 1700 hours

(20) Units cap. Rapid Discharge Bin, prefabricated for nut & bolt erection, exterior constructed of 12 gauge structurally reinforced steel. -- Chips are discharged by (2) hydraulically operated shell clamp type bottom doors for a 78" x 96" free fall opening, opening & closing via (2) 5" dia. double acting cylinders w/stroke of 48", 15 HP hydraulic pump motor with 20-gallon reservoir; braced, wide flange steel beam support structure with 14' truck height clearance. -- Complete with: Weather covers, (1) bin level indicator, embed plates w/detailed foundation plans, operator's platform, upper catwalk w/handrail & (1) caged ladder. - It holds (20) units or the equivalent of 4,000 cu. ft. by volume. - Price includes (1) coat of green primer for exterior & (1) coat of safety yellow for hand railing, ladders & guards. - Price does not include Delivery cost, Foundation, Installation or Starters & Switches for electric motor. -- This is a representative photo - other sizes are available on application.

Low Noise Grinder with Horizontal Feed; 50 HP Main drive motor, 16" diameter rotor with (24) 40 x 40 cutters; top & bottom knurled infeed rolls control feeding. -- 5" x 18" Infeed opening; 390 RPM rotor speed. -- Includes: (1) 18" Wide x 6" deep x 16' long vibratory horizontal infeed conveyor; sizing screen with 7/16" screen hole. -- Approximately 10,163 hrs on this unit.

VECOPLAN RG 42-40 SINGLE SHAFT SHREDDERSpecifications; -- 40 HP MotorVecoplan ShredderModel: RG 42/40 XL PVYear: 2007Motor: 40 HP, 460V, 60HZRPM: 1465Feed Opening: 42" x 48"Blades on rotor: 27Weight: 3,700 lbs

VECOPLAN RG52/60 SINGLE SHAFT SHREDDER Includes Box Dumper and ConveyorsSpecifications: --In Feed Opening: 52″ x 58″ --Rotor Length: 52″ --Rotor Diameter: 15″ --Hopper Volume: (4) Cubic Yards --Cutters: 37 --Drive Motor: 60 HP --Box Dumper / Table --Infeed Conveyor --Discharge Conveyor for Gaylord Box Loading