CATERPILLAR 311D Hydraulic ExcavatorThe 311D’s hydraulic system is designed for high efficiency and performance. Spacious and quiet, this world class cab lets the operator focus on performance and productivity.Specifications: -- Engine: Caterpillar C4.2 Acert Turbo Diesel 2-Speed -- Net Power @ 2200 RPM: 60 kW / 82 HP -- Bucket size: 28" -- Thumb: 13.5" -- Steel Tracks: 23.5" Equipped with: -- Pre-start Check and Monitor Display -- Heat -- AM/FM StereoNote: Serviced approx. 100 hours ago and has 4732.5 hours total. A "gray market" Caterpillar machine with parts available.

CATERPILLAR 309 CR Mini Hydraulic ExcavatorThe 309 CR Mini Excavator delivers maximum power and performance in a mini size to help you work in a wide range of applications. Specifications: -- Engine: Model Cat C3.3B -- Rated Net Power @ 2,200 rpm -- U.S. EPA Tier 4 Final: 52.4 kW / 70.3 HP -- Machine Swing Speed 10.6 RPM -- Travel Speed – High 4.9 km/h 3.1 MPH -- Travel Speed – Low 2.6 km/h 1.6 MPH -- Fuel Tank 147 L 39 gal Equipped with: -- Sealed and Pressurized Cab -- Steel Tracks with Pads -- Stick Steer Mode -- Travel Cruise Control -- Control Pattern Changer -- Bucket -- Hours: 862Additional attachments available for extra cost upon request

CATERPILLAR 953K Crawler Track LoaderSave money and transport time with one rugged machine for land clearing, digging, grading, truck loading, slope work and more. Specifications: -- Engine: Cat C7.1 ACERT -- Engine Power (maximum) – SAE J1995: 177.00 HP -- Bucket Width: 97.30" -- Fuel Tank: 70 gal -- Capacity - General Purpose: 2.40 yd3 -- Ground Clearance: 16.40" -- Digging Depth: 5.50" -- Grading Angle: 110.30" -- Operating Weight: 33,852.00 LbsEquipped with: -- General Purpose Bucket -- Enclosed Cabin -- Joystick Bucket Controls -- Pedal Steering -- Air Conditioning -- Good Undercarriage w/ 19"; Pads -- Hours: 2,214 (still in use)

CATERPILLAR 316FL Crawler Excavator Specifications: -- Reach Boom -16'9" (8'6") Stick -- Max. Digging Depth: 20' -- Max. Reach - Ground Level: 28.83' -- Max. Cutting Height: 29.25' -- Max. Loading Height: 20.58' -- Max. Loading Height: 7.5' -- Max. Depth Cut for 2440 mm (8'0") Level Bottom: 19.33' -- Max. Vertical Wall Digging Depth: 16.25' -- Bucket Digging Force - SAE: 22000 IBF -- Bucket Digging Force - ISO: 25000 IBF -- Stick Digging Force - SAE: 15500 IBF -- Stick Digging Force - ISO: 18000 IBF -- Operating Weight: 39710 Lbs. -- Max. Drawbar Pull: 35053 IBF -- Max. Drawbar Pull: 35053 IBF -- Max. Travel Speed: 3.2 MPHEquipped with: -- Auxiliary Hydraulics -- Quick coupler -- 4,176 hours

CATERPILLAR D3K2-XL Crawler DozerSpecifications: -- Engine: C4.4 Acert Turbo Diesel Rated Net Power 80 HP @ 2,200 rpm -- Dozer Blade: 103" (6-Way) -- Fuel tank: 51.5 gal -- Operating Weight – XL: 17,544 lbs -- Hours: 3,350Equipped with: -- Cab: EROPS (Enclosed Roll-Over Protective Structure) -- A/C and Heated Cab -- Stable Blade -- Traction Control -- Work Lights -- SBG Steel TracksThis dozer is equipped to handle tough tasks with ease. We are happy to assist in the most economical delivery to your location.

CATERPILLAR 953D Crawler Track LoaderSpecifications: -- Engine: Cat C6.6 150 HP Turbo Diesel -- Bucket Capacities: 1.85 m3 -- Track: 18.89" (double grouser) -- Max. Travel Speed: 6.23 MPH (10 km/h) -- Hours: 9530 -- Under carriage 50%Equipped with: -- ROPS/FOPS Cab -- Air conditioning and heated cab -- Control: Joystick -- Foot steering with counter rotation for tight turning radius -- Auto level -- Auto return to dig -- Auto dump -- Auto throttle up -- Windshield washers and wipers, front and rearAll pins / bushings are tight Machine operates as it should smoothly with no noises or leaks.We can provide financing and also the most economical delivery to your location.

CATERPILLAR 730C2 Articulated Dump TruckThe CAT 730C2 offers reliability and durability, high performance and productivity, superior operator comfort, and lower operating costs.Specifications: -- Rated Payload: 31 Tons. -- Engine: 375 HP CAT Diesel. -- Heaped SAE 2:1 23.00 yd3. -- Struck: 17.40 Yd3. -- Tailgate Heaped SAE 2:1: 24.60 yd3. -- Tailgate Struck: 18.20 Yd3. -- Transmission: 5 to 34 MPH. -- Fuel Tank: 108.8 Gal. -- Raise Time: 12.00 Sec. -- Lower Time 8.00 Sec.Equipped with: -- Tailgate. -- Articulating. -- Air conditioning and heated cab. -- Rearview camera.NOTE. Hours: 6,950; tires: 60%; box: straight; hinge: straight.

CATERPILLAR 308E2 CR Compact Hydraulic ExcavatorHigh performance and durability, and its compact radius allows it to work in areas where larger excavators can't operate.Specifications: -- Engine: Cat C3.3B 65 HP -- Operating Weight: Approximately 18,519 lbs (8,400 kg) -- Ground Pressure: 5.26 psi -- Maximum Dig Depth: Up to 163.5 inches -- Maximum Lifting Capacity: 7,385 lbs front / 5,401 lbs side -- Travel Speed: Low: 1.74 mph, High: 3.17 mph -- Bucket Rotation: 180 degrees -- Bucket Size: 24"Equipped with: -- A/C and Heated Cab -- Hydraulic Thumb -- Bolt-on Rubber Pads -- Auxiliary Hydraulics -- Mechanical Coupler -- Front Blade -- U-C 50% remaining

DEWALT 10" Radial Arm Saw. -- Specifications: -- Blade diameter: 10"; Table size: 27" x 30" x 36" H.

DEWALT GE 20" Radial Arm Saw Specifications: -- 7.5 HP TEFC Saw motor; 20" dia. blade; 1" x 3-1/8" saw arbor; -- 6" Thickness cap. @ 90°, 27" max. crosscut cap. cutting 2" board; 42" rip cap. with 52" long arm; 2" dado capacity. Complete with: -- Blade guard, magnetic starter, stand, carriage return mechanism. Includes: -- (1) New 20" blade.Optional: -- VFD Electric brake.Note: Photos are not of actual machines, but they represent the state of "Reconditioning"

DIAMOND Z DZT 1463B Tub GrinderThe 1463B is the standard by which all tub grinders are measured. No other grinder can match its power, production or versatility. It grinds wood waste, green waste and even tires at unparalleled rates.Specifications: -- Engine: CAT C32 1,200 HP / Tier 4 Final -- Screens: 5' x 7' -- Screen Area: 6,795 sq. in. (43838.62 sq. cm) -- Mill feed opening: 40" x 62" -- Productions: Up to 135 TPH/600 YPH -- Hours: Approx. 160Equipped with: -- Transmission: Fluid Coupling Drive -- Air Compressor Package -- Radial Stacker -- Radio Remote Control -- Tool Box

DIEHL - DMG -12, ...Profile GrinderSpecifications: -- 1/2" Width cap. and 10-1/2" max. cutting circle. -- 1 HP TEFC Motor with 2,260 RPM grinding spindle. -- (2) 1-13/16" Dia.; 16" X-axis & 6" Y-axis table movement. -- 30° Clockwise & 90° counterclockwise base swivel rotation for face grinding of profile cutters or planer knives. -- +30° to -30° Vertical grinding spindle adjustment. -- 2" In & out adjustment. -- 1" X-Axis & 1-7/8" Y-axis template adjustment. -- 7" Min. & 10" max. grinding wheel dia.Equipped with & Features: --Coolant pump with 5-gallon tank.

DIEHL - TFM-68, ...4"; x 8"; 5-Head High Speed Jointed Moulder5-Head (B-R-L-R-T-B) with 8-5/8" x 4-1/2" capacity. Head sequence: Bottom 15 HP, Right 10 HP, Left 10 HP, Right 10 HP, Top 15 HP, and Bottom 20 HP motor.1st Bottom and 1st right side run at 3,600 RPM; all the other spindles run at 6,000 RPM utilizing the included Frequency Changer.Side heads tilt 35° inward and 5° outward. Specifications: -- Spindle diameter: Vertical 1-13/16"; Horizontal 2-1/8" dia. for top spindle only. -- Built-in straight & profile jointers on spindles 2 - 3 - 4 & 5. -- Variable feed speed from 20 - 150 FPM via 15 HP feed drive. -- Cardan Shaft driven. -- WAXLIT Pump and groove bed with groove cutters for 1st bottom. -- Air chipbreakers and feed roll tensioning. -- Starting panel and transformer included.Weight: Approx. 14,000 Lbs

DIEHL - SL 50, ...Straight Line Rip SawSpecifications: -- 15 HP - 3,450 RPM Direct drive arbor motor, 2" dia. arbor. -- 16" Blade cap., 2-1/2" max. depth of cut. -- 10" Min. part length. -- 49" Width of table to the right of blade & 26-5/16" to the left. -- 57" x 79" Tabletop size. -- 2 HP Feed drive, feed speed of 65 - 195 FPM.Equipped with & Features: -- Twin chain drive. -- Automatic dip lubrication. -- Top pressure system with: (6) Full width rollers & (2) split rollers over blade. -- Rip fence. -- Push buttons and magnetic starters. -- Floating rip fence. -- Self-adjusting antikickback fingers. -- Full overload & undervoltage protection.

DIEHL SL-55 Straight Line RipsawSpecifications: -- 15 HP - 3,450 RPM Direct drive arbor motor, 2" dia. arbor, 16" blade cap. -- 4" Max. depth of cut, 12" min. part length -- 20-1/2" width of the table to the right of blade & 30" to the left, 66" table length.Equipped with & Features: -- 3 HP 4-Step feed drive 30 - 50 - 75 & 120 FPM; -- Twin chain drive. -- Automatic drip chain lubrication. -- Top pressure system with (6) full-width rollers & (2) split rollers over the blade.

DIEHL - SL-52, Straight Line Rip SawSpecifications: -- 15 HP Motor, 3,600 RPM belt driven, fixed 2" arbor. -- 14" to 18" Blade diameter. -- 4-1/4" Max. thickness with 18" blade diameter. -- 2 HP - 1,800 RPM feed drive, variable feed speed from 65 to 190 FPM. -- 25" Throat depth to right of blade, 24" of table to left of blade. --Table size: 61" x 80".Equipped with & Features: -- Cast iron pressure bar arms with ball bearing rollers. -- Adjustable rip fence. -- Self-adjusting antikickback fingers with control cam. -- Automatic lubrication of feed chain & race. -- Full overload and under voltage protection. -- Manual arbor brake for safety with interlock.Shipping Dimensions 7-1/2' L x 7' W x 5-1/2' H; weight of 5,000 Lbs.

DIEHL - 75, ...Straight Line Rip SawSpecifications: -- 10 HP Direct drive arbor motor, 2" dia. arbor, 18" blade cap. -- 4" Max. depth of cut, 12" min. part length. -- 21-1/2" Width of table to the right of blade & 37" to the left. -- 2 HP Feed speed motor; different speeds can be achieved by changing pulleys, 30 - 50 - 75 & 120 FPM. -- Twin chain drive, automatic dip lubrication. -- Top pressure system with: (6) Full width rollers & (2) split rollers over the blade.Note from seller: SLR in very good condition. Has been serviced by a Diehl factory technician. Chain is good with minimal slippage. Parts are still available from Diehl for this machine'The one and only reason we are selling this saw is that we need the floorspace'Factory-wired for 460v 3-phase, includes a transformer to reduce to 208V.

DIEHL - SL-52, ...Straight Line Rip SawSpecifications: -- 15 HP - 3,600 RPM belt driven motor, fixed 2" arbor. -- 14" - 18" Blade diameter. -- 4-1/4" Max. thickness with 18" blade diameter. -- 2 HP - 1,800 RPM feed drive, variable feed speed from 65 to 190 FPM. -- 25" Throat depth to right of blade; 25" of table to left of blade. --Table size of 78" x 64".Equipped with & Features: -- Cast iron pressure bar arms with ball bearing rollers. -- Adjustable rip fence. -- Self-adjusting antikickback fingers with control cam. -- Automatic lubrication of feed chain & race. -- Full overload and under voltage protection. -- Manual arbor brake for safety with interlock; 34".Shipping Dimensions: 7-1/2' L x 7' W x 5-1/2' H; weight: 5,000 Lbs.

20 HP Motor - 3,450 RPM belt driven fixed arbor, 14" - 18" blade dia., 4-1/2" max. thickness; 3 HP - 1,800 RPM feed drive, variable feed speed of 70 - 200 FPM. -- 24" Throat depth to right of blade, 18" of table to left of blade, 78" long table, cast iron pressure bar arms with ball bearing rollers, 60" guaranteed glue joint accurate. -- Multi-V, fully machined, pyramid corrugated single feed chain. -- Complete with: Adjustable rip fence, self-adjusting upper anti-kickback fingers with cam height control & lower anti-kickback fingers in table, pressure beam outfeed guard with pivoting side pressure, automatic pneumatic lubrication of feed chain & race, full overload & under voltage protection, automatic brake for arbor protection, and pressure bar curtain. -- Option: Diode laser & mounting bracket, please add ...$ 1645.

DIEHL STRAIGHT LINE RIP SAW SL30-19 Specifications: -- 10 HP Motor - 3,450 RPM belt driven fixed arbor, 14" - 16" blade dia., 2-1/2" max. thickness; 1.5 HP - 1,800 RPM feed drive, single fixed feed speed of 60 FPM. -- 19" Throat depth to right of blade, 18" of table to left of blade, 56" long table, cast iron pressure bar arms with ball bearing rollers, 60" guaranteed glue joint accurate. -- Multi-V, fully machined, pyramid corrugated single feed chain.Complete with: -- Adjustable rip fence, self-adjusting upper anti-kickback fingers with cam height control & lower anti-kickback fingers in table. -- Pressure beam outfeed guard with pivoting side pressure, automatic pneumatic lubrication of feed chain & race. -- Full overload & under voltage protection. -- Automatic brake for arbor protection, and pressure bar curtain. Options: Diode laser & mounting bracket; 15 HP motor, 20 HP motor.