RUVO 2260 Wedge Cutter. -- General Data: Wedge and glue-block cutter. Allows for 1" X and 2" X material in the same hopper. Cuts (2) wedges out of 1" X material and (1) wedge out of 2" X stock. -- Self diagnostic system, walk-away, hands free operation. -- If not reloaded, the machine has an auto-shut-off feature at the end of the stack to prevent the machine from cycling endlessly. --With capability to cut glue-blocks. -- Ports for dust collection.

RUVO 505, ...Prehung Door Machine.Handles a wide range of door, jamb, and hinge sizes. - Bevels doors and door hinges. - Designed for efficient handling and operation. - Fast, accurate hinge and lock backset adjustment. - Residential, Commercial, Architectural, and Labeled Fire Doors.Features: Heavy duty powered 3° beveler/sizer. Routers to ease door edges. Accurate target scales. The 4-hinge and jamb route location changes fast and precisely. A similar system for the backset on hinges & locks. Provision for single and double-belled doors. Controls interlocked by a PLC. Auto door sizing is fast to adjust the lifter bar by digital input and servo control. Reliable, long-lasting non-contact sensors. Fast push-pull controls with a friendly touchscreen HMI. Hinge screw gun and pre-drill included.Technical Details: Max Door Height: 6’ - 9’ or ADA Specs 6’ - 8’. -- Door Width: 1'-6"’ to 4’. -- Door Thickness: 1-3/8"; to 2-1/4. -- Jamb Size and Styles: Up to 1-1/4"; x 10";, all styles. -- Number of hinges: Up to (4); Hinge Size: 3-1/2" to 5";; Hinge Radius 1/4" to 5/8". -- Hinge Backset: Scaled as required -- Lock Bore Sizes: 2-1/8"; Standard. -- Lock bore Backset: Scaled to 5";. -- Lock Bore Latch plate: Up to 1-1/4"; x 8";.Machine Size: 18’ x 3’ x 7’; Approx. Machine Weight: 3,200 Lbs; Electrical: 4-Wire, 230/3/60 and draws 25 Amps. Requires a 1/2" airline using 40 CFM @ 90 PSI.Options Include: -- Built-In Power Beveler Vacuum System......$ Please call. -- Screw Driver............................................... Included. -- Pre-Drill Kit.................................................. Included -- Digital Readout ..........................................$ Please call.RUVO 512, ...Heavy Duty Strike Jamb Mortising Machine.For Jam Sizes up to 1-1/4"; x 9"; x 10";. Strike Plate mortise to 6";. Compliments Jamb Preparation of the RUVO 505 and 405. Operated by one worker.Unit Includes: -- Adjustable Jamb Stops. -- Heavy Duty Construction. -- Foot Pedal Actuated Clamp. -- 120 Volt, 1-Phase, 20 Amps. -- 1/2" Airline needs 0.5 CFM @ 100 PSI. -- 1.5 HP Router.@ 23,000 RPM. Additional Cost for the RUVO 512 above ...$Please call.Material Handling for the Line:Loading Device..........................................$ Please call.Unloading Device.......................................$ Please call.

RUVO 2200 Stair Stringer Router, Top/Bottom, Semi-automatic. -- Size capacity (nominal): 2" Thick x 12" - 15-3/4" wide stringer size; semi-automatic operation. -- (2) 5 HP, 25,000 RPM Router motors for top & bottom heads. T & B heads are arranged to jump in & out to facilitate open plan stairs; automatic pneumatic clamping of stringers, spring loaded side pressure to keep stringers against the fence. -- Mirror-image routing on (1) pair of stringers at one time, graduated template automatically sets up to stated tread & rise, cuts standard wedge taper for both treads and risers. -- Includes: Clamp and feed system & safety covers. -- NOTE 1: Stair Router rebuilt in 2022 by BUILDERS AUTOMATION. Replaced 3HP with new 5HP routers. Reconditioned air cylinder pistons, air-over oil booster, replaced air lines, etc.. Painted from green to Blue.

--In auction: https://exfactoryauctions.com/Detail/SA-231010/event/A122024$1 --No Reserve!-- RYE R 72 2-Spindle Automatic Rotary Copy Shaper Specifications: Cutting circle cap. 24" - 80", Max. square cap. 56", Max. rectangular shape cap. 71" x 35-1/2", & Max. length capacity 50". Table size 68" Dia. x 40-1/2" H. Table speeds 0.3 - 3 RPM. Spindle speed 9,000 RPM. Equipped with: (2) 1-1/8” Dia. High frequency floating spindles, with Frequency changer. 6-1/2” Dia. Center clamp plate.

SAV S 53 S Single-Sided Planer20" Width x 1/8" to 12" opening; 6.6 HP motor, 4-knife 4-3/4" dia. cutter head rotates @ 5,000 RPM, max. cutting depth 5/16" -- (4) fixed feed speed settings 13 - 23 - 36 - 59 FPM. Equipped with: -- (1) Steel outfeed roller, (2) adjustable bed rollers, sectional infeed roller, sectional chip breaker, manual raise & lower w/mechanical digital readout; -- Table size 41" x 21". Complete with: -- Emergency stop, magnetic starter w/overload protection & 5-1/2" dia. dust hood.

SAC - PRIMA K 630, ...Single Head Sander24" Width cap single head. -- Combination sanding head with: 4-3/4" Dia. grooved rubber contact roll & 2" wide polishing platen. -- 7.5 HP Motor; abrasive belt size 25" x 75" with air tensioning & electronic abrasive belt tracking. -- Dual feed speed 15 or 31 FPM; infeed & outfeed rubber-covered holddown rolls. -- 6-1/4" Motorized thickness adjustment by 0.5 HP motor with: LED Readout, and automatic part thickness adjustment; micro switch; 7" dust hood opening. -- Complete with: --: Emergency stop button, motor load meter, and selection of belts.

SAC F 430 430 mm (16.93") Jointer Specifications: Max. depth of cut 8 mm (0.31"), Rabbeting cap. 1/3" x 16". Infeed table size 430 x 1,570 x 860 mm (16.93” x 61.81” x 33.86”) H. Outfeed table size 430 x 1,280 x 860 mm (16.93” x 50.39” x 33.86”) H. Cutterhead speed 5,000 RPM. Equipped with: 120 mm (4.72”) Dia. 4-Knife Nickel-Chromium Molybdenum Steel Cutterhead, with "TERSA" Knives. 3 kW (4HP) Motor, with Brake. 1,200 mm L x 160 mm H (47.24” L x 6.30” H) Aluminum fence, with 0° - 45° Tilt. Swing-away guard. Knife setting gage. Complete with: Spare Knife Set (Needs sharpening).

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i5x Entry-level Vertical panel saw for cutting various materials, straight & square to 1/32". Specifications: 3.25 HP Industrial Duty saw motor; 8" saw blade cap. with 1-3/4" max. material thickness; 64" crosscut (vertical position) with spring-loaded counterbalance system; unlimited rip-cut length cap. Features: Saw head rotates 90° to switch between rip and crosscut modes; adjustable scales on a 10' welded steel frame. Complete with: Zinc plated 1-3/4" guide tubes with "Nylatron" 4-roller bearing system; +/- 1/32" squaring or straight cutting tolerance. NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

SAFETY SPEED 3760 Wide Belt Sander;Heavy welded construction minimizes vibration and ensures consistency in sanding.Specifications: -- Single-head 37" wide Combination Sanding Head. -- Rubberized 4-1/4" dia. contact drum with a 2-1/2" finishing platen. -- Hand wheel to manually change the thickness setting form 0" - 7-1/4". -- 15 HP 3-Phase motor main drive motor. -- 37" x 60" Abrasive Sanding belts. -- Pneumatic belt tensioning and infrared electric eye tracking. -- 1-1/2" Dia. infeed & outfeed rubber covered holddown rollers. -- Infeed safety stop bar, emergency stop button and 6" dia. dust outlet. -- Available Options: Hour meter and 15 HP, 3-Phase motor, and digital readout for conveyor bed opening. -- Dimensions: 50-1/2" L x 47" W x 63" H (Crated Dimensions - 55-1/2" L x 52" W x 68" H).

SAFETY SPEED MODEL 4375 WIDE BELT SANDERHeavy welded construction to minimize vibration and ensure consistent sanding. -- Single 43" Wide combination sanding head. -- Rubberized 5-1/4" contact drum with a 2-1/2" wide finishing platen. -- Hand wheel to manually change the thickness setting form 0" - 7-1/4". -- DC Conveyor drive with variable feed rate of 0 - 18 FPM. -- 43" x 75" Abrasive belts. -- Pneumatic belt tensioning and infrared electric eye tracking. -- 1-1/2" Dia. infeed & outfeed rubber covered holddown rollers. -- Infeed safety stop bar, emergency stop button and 6" dia. dust outlet. -- Avaialble Options: Motorized conveyor setting; Hour meter; Digital height setting; and 20 or 30 HP 3-Phase motor. -- 53" L x 56" W x 70" H (Crated Dimensions - 58" L x 61" W x 75" H).

SAFETY SPEED MFG 60HA Hot Air Edgebander; Safety Speed Cut now offers a Hot Air Edgebander that is small in price yet big in ability.The NEW "60HA" features: -- Electronic variable speed control -- Digital Electronic temperature control -- Adjustable Heat nozzle that saves energy. -- Electromagnetic end-cutters; no compressed air needed -- Accutrim edge trim system uses industrial duty trim routers to ensure a quality finish. -- Dust collection outlet to keep the part machine and floors clean -- Automatic conveyor for consistent feed rate.....and yes it is "American Made"!

SAFETY SPEED 72GP EDGEBANDER -- Digital P.I.D. Temperature control Glue Pot that reduces overheating and burning of the glue. -- Standby temperature mode for small runs. -- Short 10 - 15 Min heat up time -- Digital Electronic temperature control. -- Adjustable Heat nozzle that saves energy. -- Electromagnetic guillotine end-trim means no compressed air needed. -- Accutrim edge trim system uses industrial duty trim routers to ensure a quality finish. -- Dust collection outlet to keep the part machine and floors clean. -- Automatic conveyor for consistent feed rate -- American Made.

SAFETY SPEED SPM-301 Screw Pocket MachineUnlike others of its kind, the SAFETY SPEED SPM-301 features cam-driven action providing fast, smooth cutting action under complete mechanical control throughout the machine cycle. The pilot drill and ball end mill produce superior low-angle screw pockets. The SPM301’s mechanical linkage allows the pilot drill bit and router bit to cut at the same time, reducing cycle time without sacrificing cut quality. Manufactured completely in the USA, the SPM301 showcases heavy duty construction;Advantages: -- FENCE ADJUSTMENT: Simple back fence and stop rail make pocket adjustments for different screw lengths quick and easy. -- CONTROLLED FAST CUT: Mechanical CAM linkage allows pilot drill bit and router bit to be cutting at the same time, reducing cycle time without sacrificing cut quality. Controlled cut increases tool life. -- DEPTH GAUGE: Simple device makes it a snap to see pocket depth before you cut. -- POCKET DEPTH ADJUSTMENT: The SPM301 has the ability to change depth of pocket for different material thickness quickly with the simple crank of a handle. -- EASY ACCESS TO TOOLING: The SPM301 has top down access to the tooling for quick bit changes and adjustments.Specifications: -- Router Motor 2-1/4 HP @ 27,500 RPM. -- Compact router drill @ 16,000 - 27,000 RPM. -- Vacuum requirement 220 CFM, 3" hose connection. -- Air requirements 1-2 CFM @ 80 PSI Option: Table extension provides 48" working surface

STAR V MACHINERY SLG-2000 36 LINEAR V-GROOVER: -- SpecificationsWorking table dimensions: 120" Long x 36" wide; working width: 6" - infinite" (152 mm - infinite); working length: 20" - infinite (508 mm - infinite); working thickness: 0.25" - 1.15" (6 - 29 mm).Max. throat clearance for linear & crosscuts: 14-1/2"/24-1/2" (355/622 mm). -- Equipped with: (2) Independent 10 HP - 3,600 RPM saw motors with: "Servo" control adjustment in "Y" axis & manual "Z" axis adjustment.30 mm Dia. arbor x 76 mm (3") clamping length to accommodate wider cove backsplash, triple fold profiles, or using it for hogging and finish cut; 9-1/4" (235 mm) max. cutterhead dia.(1) Saw motor mounted on the front & (1) Saw motor mounted on the back of the 8" x 12" x 1/2" heat treated steel Heavy-Duty overhead support beam.Side-to-side head travels via linear rails & bearings; manual head height adjustment via linear rails & bearings. -- Feeding System(1) 3 HP Variable speed drive belt system with: "Servo" height adjustment; feed rate: 0 - 45 FPM (12 MPM); belt feeder moves workpiece on a precision "aluminum" roller table. -- Tape Applicator (2) Automatic Tape Applicators with: "Servo" adjustment according to the Saw motor position in "Y" axis. -- Operator Interface10" HDMI Touchscreen display for: Start/Stop, On/Off, Feed Speed & Axis Position. -- Complete with:Safety guards and cutter guards; Anti-Kickback Device; Emergency Shutoff line.Dust Collection requirements: 4,200 CFM; Collector outlets on cutter guards: 5" in dia. -- Actual model #: STAR V MACHINERY SLG-2000

STAR V MACHINERY SLG-2000 48" LINEAR V-GROOVER: -- SpecificationsWorking table dimensions: 120" Long x 48" wide; working width: 6" - infinite" (152 mm - infinite); working length: 20" - infinite (508 mm - infinite); working thickness: 0.25" - 1.15" (6 - 29 mm).Max. throat clearance for linear & crosscuts: 14-1/2"/24-1/2" (355/622 mm). -- Equipped with: (2) Independent 10 HP - 3,600 RPM saw motors with: "Servo" control adjustment in "Y" axis & manual "Z" axis adjustment.30 mm Dia. arbor x 76 mm (3") clamping length to accommodate wider cove backsplash, triple fold profiles, or using it for hogging and finish cut; 9-1/4" (235 mm) max. cutterhead dia.(1) Saw motor mounted on the front & (1) Saw motor mounted on the back of the 8" x 12" x 1/2" heat treated steel Heavy-Duty overhead support beam.Side-to-side head travels via linear rails & bearings; manual head height adjustment via linear rails & bearings. -- Feeding System(1) 3 HP Variable speed drive belt system with: "Servo" height adjustment; feed rate: 0 - 45 FPM (12 MPM); belt feeder moves workpiece on a precision "aluminum" roller table. -- Tape Applicator (2) Automatic Tape Applicators with: "Servo" adjustment according to the Saw motor position in "Y" axis. -- Operator Interface10" HDMI Touchscreen display for: Start/Stop, On/Off, Feed Speed & Axis Position. -- Complete with:Safety guards and cutter guards; Anti-Kickback Device; Emergency Shutoff line.Dust Collection requirements: 4,200 CFM; Collector outlets on cutter guards: 5" in dia. -- Actual model #: STAR V MACHINERY SLG-2000

STAR V MACHINERY SLW-4818 SLAT WALL GROOVING MACHINE: -- Specifications48" wide panel capacity, feed through style overhead milling Slatwall machine. The machine will produce 4' x 8' panels in portrait orientation or any orientation as long as the panel size does not exceed 4' x 4'.The panels are placed with side to be grooved, facing up, then pushed in between the fixed fence and a movable fence, until the panel is grabbed by the first rubberized feed roller, the panel is then transported between a number of pinch rollers and processed through 3 rows of high-speed spindle motors.As the T Slot cutting is processed each bank (6 in total) of 3 high speed spindle motors cut a T shaped groove appropriate to the size of tool installed in each spindle, blow the groove clean by use of high-speed air knives, and remove dust through a number of dust ports. Then pinch rollers push the sheet out of the machine roller bed.Panels as narrow as 6" wide can be fed through the machine although workpieces less than 3/8" thick must be 48" wide. Workpieces as short as 24" can also be fed through the machine safely.Minimum recommended workpiece width, 6": Maximum workpiece width, 48": Minimum recommended workpiece length, 24": Maximum workpiece length, UNLIMITED: Maximum workpiece height, 1.5". -- Features:5HP 1750RPM, 460V Feeder Drive Motor through 50:1 Gear Box. 5HP VFD Inverter to drive and control feed speed through machine, 0-50 linear feet per minute. Heavy Duty Welded Tubular Steel Frame Construction. Stainless Steel Roller Bed with Rollers 6" on Center. 10x Linatex Rubber coated Feed Pinch Rollers Driven by 5Hp Feed Motor and Drive. Fixed Guide Fence& Movable fence to aid feeding of sheets into machine. Safety Fence around both sides along the length of the machine, with 1 gate in each side, each with safety interlock. Safety photo eye in infeed and outfeed side of the machine. Gauge block for setting height of router arbors. -- Spindle Motors:18 x 3 kW (4 HP), 18,000 RPM, 230V, High Speed Spindle Motors. 100 HP VFD Inverter to drive and control rotational speed of all 18 spindle motors.Variable RPM of Spindle Motors through Potentiometer and RPM displayed on Control Panel. Individual Ammeter for each Spindle on Control Panel. 6 x banks with 3 x High Speed Spindle Motors per bank (18 Total Spindle Motors). All 6 Spindle Banks are adjustable on the Overhead Beams by Hand, and lock into Position via locking handles. Digital Read Out for horizontal position of each spindle bank. Spindle 1 on each bank is fixed horizontally, Spindles 2, and 3 adjust on each bank horizontally. All 3 spindles adjust individually vertically on each spindle bank via Hand wheel. Position of depth on Digital Read Out.All Spindle raised individually through pneumatic cylinder for changing tooling, or when not in use. Each Bank has a phenolic Hold Down Shoe.Spindle Centers adjust from 3" to 4" Centers; Rapid Center Adjust Switch, from 3" to 4" through Air Cylinders against positive s

STAR V MACHINERY SLW-6018 SLAT WALL GROOVING MACHINE: -- Specifications60" (5') Wide panel capacity, feed through style overhead milling Slatwall machine. The machine will produce 5' x 8' panels in portrait orientation or any orientation as long as the panel size does not exceed 5' x 5'.The panels are placed with side to be grooved, facing up, then pushed in between the fixed fence and a movable fence, until the panel is grabbed by the first rubberized feed roller, the panel is then transported between a number of pinch rollers and processed through 3 rows of high-speed spindle motors.As the T Slot cutting is processed each bank (6 in total) of 3 high speed spindle motors cut a T shaped groove appropriate to the size of tool installed in each spindle, blow the groove clean by use of high-speed air knives, and remove dust through a number of dust ports. Then pinch rollers push the sheet out of the machine roller bed.Panels as narrow as 6" wide can be fed through the machine although workpieces less than 3/8" thick must be 48" wide. Workpieces as short as 24" can also be fed through the machine safely.Minimum recommended workpiece width, 6": Maximum workpiece width, 48": Minimum recommended workpiece length, 24": Maximum workpiece length, UNLIMITED: Maximum workpiece height, 1.5". -- Features:5HP 1750RPM, 460V Feeder Drive Motor through 50:1 Gear Box. 5HP VFD Inverter to drive and control feed speed through machine, 0-50 linear feet per minute. Heavy Duty Welded Tubular Steel Frame Construction. Stainless Steel Roller Bed with Rollers 6" on Center. 10x Linatex Rubber coated Feed Pinch Rollers Driven by 5Hp Feed Motor and Drive. Fixed Guide Fence & Movable fence to aid feeding of sheets into machine. Safety Fence around both sides along the length of the machine, with 1 gate in each side, each with safety interlock. Safety photo eye in infeed and outfeed side of the machine. Gauge block for setting height of router arbors. -- Spindle Motors:18 x 3 kW (4 HP), 18,000 RPM, 230V, High Speed Spindle Motors. 100 HP VFD Inverter to drive and control rotational speed of all 18 spindle motors.Variable RPM of Spindle Motors through Potentiometer and RPM displayed on Control Panel. Individual Ammeter for each Spindle on Control Panel. 6x banks with 3x High Speed Spindle Motors per bank (18 Total Spindle Motors). All 6 Spindle Banks are adjustable on the Overhead Beams by Hand, and lock into Position via locking handles. Digital Read Out for horizontal position of each spindle bank. Spindle 1 on each bank is fixed horizontally, Spindles 2, and 3 adjust on each bank horizontally. All 3 spindles adjust individually vertically on each spindle bank via Hand wheel. Position of depth on Digital Read Out.All Spindle raised individually through pneumatic cylinder for changing tooling, or when not in use. Each Bank has a phenolic Hold Down Shoe.Spindle Centers adjust from 3" to 4" Centers; Rapid Center Adjust Switch, from 3" to 4" through Air Cylinders against positi

STAR V MACHINERY SLG-2000 36 LINEAR V-GROOVER: -- SpecificationsWorking table dimensions: 120" Long x 36" wide; working width: 6" - infinite" (152 mm - infinite); working length: 20" - infinite (508 mm - infinite); working thickness: 0.25" - 1.15" (6 - 29 mm).Max. throat clearance for linear & crosscuts: 14-1/2"/24-1/2" (355/622 mm). -- Equipped with: (2) Independent 10 HP - 3,600 RPM saw motors with: "Servo" control adjustment in "Y" axis & manual "Z" axis adjustment.30 mm Dia. arbor x 76 mm (3") clamping length to accommodate wider cove backsplash, triple fold profiles, or using it for hogging and finish cut; 9-1/4" (235 mm) max. cutte-rhead dia.(1) Saw motor mounted on the front & (1) Saw motor mounted on the back of the 8" x 12" x 1/2" heat treated steel Heavy-Duty overhead support beam.Side-to-side head travels via linear rails & bearings; manual head height adjustment via linear rails & bearings. -- Feeding System(1) 3 HP Variable speed drive belt system with: "Servo" height adjustment; feed rate: 0 - 45 FPM (12 MPM); belt feeder moves workpiece on a precision "aluminum" roller table. -- Tape Applicator (2) Automatic Tape Applicators with: "Servo" adjustment according to the Saw motor position in "Y" axis. -- Operator Interface10" HDMI Touchscreen display for: Start/Stop, On/Off, Feed Speed & Axis Position. -- Complete with:Safety guards and cutter guards; Anti-Kickback Device; Emergency Shutoff line.Dust Collection requirements: 4,200 CFM; Collector outlets on cutter guards: 5" in dia. -- Actual model #: STAR V MACHINERY SLG-2000

STARLITE 26' GOOSENECK TRAILERSpecifications: Length: 26 ft -- Type: Gooseneck

STATE B-4 OSCILLATING SPINDLE SANDER 1.5 HP Motor with manual switch, (9) spindles from 1/4" DIA to 4" DIA., 1,725 RPM spindle rotation, 20" x 24" table tilts 15° up and 45° down, table height 40". Also includes work light