KAESER CSV 150 40 HP Rotary Screw Vacuum Pump, with 17,504 Run & 10,274 Load Hrs.IMPORTANT BIDDING NOTE: This lot is also part of Lot #006, which is a bulk lot consisting of Lots #006A & #006B. If the individual bid amounts for Lots #006A & #006B total more than the bulk bid amount for Lot #006, then Lots #006A & #006B will be awarded to the high bidder of each lot.Specifications: -- Cap. 555 ACFM at 10" HGV. -- Max. Vacuum > 99.9%.Equipped with: -- Air-cooled cooler. -- Reservoir/separator tank. -- SIGMA PC-Based control.

KAESER - ASD 40 T, ...40 HP Rotary Screw Air Compressor, with Integrated Dryer & 17,702 Run & 3,775 Load Hrs (as of 2/16/24)Specifications: -- Rated capacity: 191 CFM. -- Max. pressure: 125 PSIG. Equipped with: -- 40 HP - 3,570 RPM TEFC Direct drive motor; IE3 (Premium Efficiency). -- "SIGMA PROFILE" Air end. -- 1:1 Motor-air end coupling. -- Wye-Delta reduced voltage magnetic starter. -- Electronic Thermo-Management (ETM) system. -- 2-Stage 4 micron air intake filter with Cyclone pre-separation & replaceable element. -- Safety pressure relief valve. -- Anti-vibration mounts. -- Sound enclosure. -- KAESER "SIGMA CONTROL 2" PC-Based controller with LCD Display & Touchpad.Complete with: -- Integrated Refrigerated Dryer. -- Compressor Operator Manual & Controller User Manual.Dimensions for this Specific Machine: 70" x 36" x 61" H.Weight for this Specific Machine: 750 kG (1,650 Lbs).

KAESER - ASD 40 T, ...40 HP Rotary Screw Air Compressor w/Integrated Dryer & TankSpecifications -- Rated cap.: 191 CFM; max. pressure: 125 PSIG; 40 HP - 3,570 RPM TEFC Direct drive motor; IE3 (Premium Efficiency). -- "SIGMA PROFILE" Air end; 1:1 motor - air end coupling; WYE-DELTA reduced voltage magnetic starter; electronic Thermo-Management (ETM) system. -- Equipped with: -- 2-Stage 4 micron air intake filter with: Cyclone pre-separation & replaceable element; safety pressure relief valve; anti-vibration mounts; sound enclosure. -- KAESER "SIGMA CONTROL 2" PC-Based controller with: LCD Display & Touchpad; KAESER ABT "60" Integrated Refrigerated Dryer. -- Includes -- Vertical Accumulator Tank (approx. 400 gal.); KAESER KCF 100 Oil/Water Separator.

KAESER KCF 200 Oil/Water SeparatorSpecifications: -- Cap. for Screw Compressors: 900 SCFM for Mineral/Turbine oil (Additive free), 600 SCFM for Diesters PAO, & 450 SCFM for Polyglycol. -- Cap. for Piston Compressors: 600 SCFM for Mineral/Turbine oil (Additive free), 450 SCFM for Synthetic oil. -- Filling volume 19.2 Gallons. -- Max. operating pressure 232 PSIG.Equipped with: -- 30.5 Gallon Container. -- 4.9 Gallon Pre-filter, 5.4 Gallon Main filter.

MAGGI - SYSTEM 21 PRESTIGE: Construction/Line Borer Adjustable 21-spindle boring head on 32 mm centers with position indicator.Specifications: -- Stops in 0° and 90° with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with patented setting device. -- (2) Patented material clamps with: Auto setting & safety feature. -- Head height fine adjustment with: Mechanical digital readout. -- 2 HP - 2,800 RPM Motor. -- 34" x 15" Table with: Mechanical digital side fences for mirror image. -- 120" Line Boring fence with: (2) Repeat stops. -- Foot actuated pneumatic clamps & drill cycle. -- Equipped with: Magnetic starter, overload protection, and (1) set of "quick-change" chucks.

MAGGI SYSTEM 23 Construction Hole Boring Machine Adjustable 23-spindle boring head on 32 mm centersSpecifications: -- Stops in 0° & 90° with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with patented setting device. -- (2) Patented material clamps with auto-setting & safety feature. -- Head height fine adjustment with a mechanical digital readout. -- 2 HP - 2,800 RPM Motor. -- 38" x 16" Table with mechanical digital side fences for mirror-image. -- 120" Line Boring fence with (4) repeat stops & spring loaded repeat pin. -- Foot actuated pneumatic clamps & drill cycle. -- Magnetic starter, overload protection and (1) set of "quick change" chucks. -- Dust Outlet: 3".Net weight: 630 Lbs; Dimensions: 51.7" x 37.8" x 50" Tall; Crated Dimensions: 44" x 38" x 42" Tall; Crated Weight: 664 lbs.Available in single phase ... Add $ 600.00

MAGGI SYSTEM 23 Construction Line BorerConstruction Boring Machine that drills vertically from bottom and horizontally from rear.Specifications: -- 23-Spindle head on 32 mm centers. -- Table size: 38" x 16". -- Max. working width: 25". -- Drilling stroke: 2-1/2". -- Main motor: 2 HP. -- Adjustable drilling depth with patented spiral setting device: ?0 to 2-1/2". -- Tilts pneumatically from lower to rear position with locking points between 0° - 90° for drilling any angle. Equipped with: -- 120" Back fence with: (4) Stops. -- Foot pedal control. -- Magnetic Starter with overload protection. -- (23) Quick-change chucks. -- (2) Patented quick-release pneumatic holddown clamps with independent manual movement. -- Dust outlet: 3".

MAGGI SYSTEM 29 CONSTRUCTION/LINE BORERAdjustable 29-spindle boring head on 32 mm centers with position indicator. -- Stops in 0° & 90° with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with patented setting device. -- (2) Patented material clamps with auto-setting & safety feature. -- Head height fine adjustment with mechanical digital readout. -- 2 HP - 2,800 RPM Motor. -- 45" x 16" Table with mechanical digital side fences for mirror-image. -- 120" Line boring fence with (4) repeat stops & spring loaded repeat pin. -- Foot actuated pneumatic clamps & drill cycle. -- Magnetic starter, overload protection and (1) set of "quick change" chucks. -- Other Accessories also Available!

MAGGI SYSTEM 35 CONSTRUCTION/LINE BORINGAdjustable 35-spindle boring head on 32 mm centers with position indicator. -- Stops in 0° & 90° with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with patented setting device. -- (2) Patented material clamps with auto-setting & safety feature. -- Head height fine adjustment with mechanical digital readout. -- 2 HP - 2,800 RPM Motor. -- 45" x 16" Table with mechanical digital side fences for mirror-image. -- 120" Line boring fence with (4) repeat stops & spring loaded repeat pin. -- Foot actuated pneumatic clamps & drill cycle. -- Magnetic starter, overload protection and (1) set of "quick change" chucks. -- Other Accessories also Available!

MAGGI SYSTEM 46 Double Head Line Boring Machine:Heavy Double Head Line Borer with (2) 23-spindle heads; 32 mm spindle spacing.Specifications: -- Drilling from the bottom up and with 5-1/8" - 25-19/32" distance between rows. -- Drilling vertically from the bottom allows the chips to drop down falling out of the holes. -- Drilling depth of up to 2-1/16" (55 mm) max., takes only seconds to set. -- (2) 2 HP - 3,500 RPM Commercial Duty motors; spindles with steel gears & high quality bearings. -- Easy repetition by (2) air index pins for continuous line drilling, left and right roller track supports extend up to 400 mm (15-3/4") for larger panels.Features and Includes: -- 120" Back fence with (4) repeat "flip" stops; includes 27-3/4" (704 mm) fence for quick positioning of flip stops. -- (6) Pneumatic holddowns to automatically actuate when the drill cycle begins. -- (46) "Quick Change" chucks for easy tool change. -- Magnetic motor controls and 1/4" air regulator with filter and oiler; 100 PSI required air pressure.

MAKITA LS1013 10" Double Bevel Sliding Compound Miter Saw, with Stand Specifications: Miter angles 52° Right & 47° Left, with (9) Positive stops at 15°, 22.5°, 31.6°, & 45° Left or Right & 0°. Bevel angles 45° Right & 45° Left. Dimensional lumber cut capacity: 2" x 12" at 90° & 2" x 18" at 45° Left. Arbor dia. 5/8" Equipped with: 1,430 W - 13 A - 3,700 RPM Motor, with Electric brake. Complete with: DELTA "55-155" Universal Miter Saw Stand. Machine with Stand Dimensions: 104" x 28" x 59" H. Machine Dimensions: 30" x 28" x 25" H. Machine Weight: 50 Lbs. Stand Dimensions: 104" x 22" x 35" H. Stand Weight: 85 Lbs.

MAKOR LTS/6E Profile Sander(6) Stations, 6"Width Capacity (approx), PLC Controller. -- 5.5HP Variable Speed Feed Motor with (6) 6"W Powered Feed Belts. -- 1st Station: Tiltable Polishing Head 2HP MAKOR Motor with Powered Cooling Fan and J1000 Drive. -- 2nd Station: Tiltable Polishing Head 2HP MAKOR Motor with Powered Cooling Fan and J1000 Drive. -- 3rd Station: Tiltable Polishing Head 2HP MAKOR Motor with Powered Cooling Fan and J1000 Drive. -- 4th Station: Tiltable Polishing Head with with 2HP MAKOR Motor with Powered Cooling Fan and J1000 Drive. -- 5th Station: Tiltable Polishing Head with 2HP MAKOR Motor with Powered Cooling Fan and J1000 Drive. -- 6th Station: Tiltable Polishing Head with 2HP MAKOR Motor with Powered Cooling Fan and J1000 Drive.

MAKOR LTSI/6 Profile Sander(6) Stations, 6"Width Capacity (approx), PLC Controller. -- 5.5HP Variable Speed Feed Motor with (6) 6"W Powered Feed Belts. -- 1st Station: Tiltable Polishing Head 2HP MAKOR Motor with J1000 Drive. -- 2nd Station: Tiltable Polishing Head 2HP MAKOR Motor with J1000 Drive. -- 3rd Station: Tiltable Polishing Head 2HP MAKOR Motor with J1000 Drive. -- 4th Station: Tiltable Polishing Head with with 2HP MAKOR Motor with J1000 Drive. -- 5th Station: Tiltable Polishing Head with 2HP MAKOR Motor with J1000 Drive. -- 6th Station: Tiltable Polishing Head with 2HP MAKOR Motor with J1000 Drive.Dimensions are 20’ L x 5’ W, 8’ H, and weighs approximately 7,000 lbs.

ROTOFAST 10 panel cleaner is designed for automatic cleaning of parts just prior to coating application for a dust-free finish. A rotating brush is combined with air blow-off units and an anti-static bar in order to efficiently clean flat or profiled parts of different shapes and dimensions. KEY FEATURES --Top surface One rotating brush with variable speed and height adjustment --One de-ionizing (anti-static) bar --One group of rotary blowers with timed entry --One group of fixed blower nozzles with timed entry Bottom surface --One group of fixed blower nozzles with timed entry --All components housed in single cabinet with suction hoods --Feed speed adjustable by potentiometer --Rubber pressure rollers to secure parts while brushing --Belt conveyorWeight 600 Kg.

MAKOR Q1 Spray Line including Paint Pumps and Guns:This line was set up with the idea of adding a stack oven after the sprayer in the future if it is required. This line has seen very little use.Station #1: Infeed loading conveyorStation #2: MAKOR Q1 paper belt sprayer 3 circuits plus a cleaning circuit.Station #3: Ppowered roller conveyorsStation #4 (3) three lamp UV oven. Station #5: Outfeed conveyor. The line comes with (2) two paint pumps and (4) four spray guns, the brands GRACO MERKUR and GRACO spray guns. Reciprocating Spray Machine, Makor Q-ONE 1300 with Changeover SystemFlexibility, reliability, and ease of use, combined with limited managing cost and investment, make Q-ONE the ideal machine for companies with low-volume production applying water-based or solvent-based paints, or glues. Even companies switching to automatic coating applications for the first time can realize the advantages of the Q-ONE: Higher production and paint savings, uniform coating, and higher and more consistent quality.Structure and Transport System:The single steel frame guarantees perfect stability and the absence of vibration during the oscillating spraying. A part reading bar is located at the entrance of the machine to detect the workpiece shape to optimize paint consumption. The workpiece transport system consists of a paper belt or plastic film supported by a vacuum belt system makes the machine self-cleaning, eliminating downtime and maintenance costs, but does not allow the recovery of the sprayed productoverspray is prevented from accumulating on the lower side of the workpiece paper roll replacement is quick and easy.Spraying Group:The guns, mounted to oscillating supports, are adjustable to allow optimal orientation of the spraying zone the entire oscillating group is connected to the frame of the machine through pads that guarantee the absolute absence of vibrations, resulting in perfect paint quality on the workpieces, the pressurization of the zone containing the oscillating mechanisms extends its life and requires little maintenance.Four (4) guns can be connected to one of the three (3) coating circuits three (3) high-pressure circuits with recycle for coatings one (1) high-pressure circuit (without return) for solvent. Coating circuits have return hoses for quickly washing the circuit and for the recirculation of paint-standard supply provides two (2) gun holding plates with a quick disconnection system to allow for fast replacement of the spraying unit.Paper Unrolling and Rewinding System:The unrolling system at the entrance and the rewinding device at the exit are designed to maintain constant tension of the paper, avoiding breakage even when it is soaked by the paint, loading and unloading the support rolls are easy due to lateral pull out on wheeled carriers. An independent vacuum hold-down fan enables superior control of the paper belt rewind station and includes a self-adjusting system to maintain a consistently flat paper belt transport

MARATHON -TIEger WC-150: Auto-Tie Horizontal Baler w/Infeed ConveyorSpecifications -- Feed opening: 60" x 38". -- Motor: 30 HP. -- Compressing Cylinder: 8" x 6" x 74". -- New in 2017. -- Loaded on your Truck.

MARATHON -TIEger WC-150, Auto-Tie Horizontal Baler- Motors: 30 HP- Cylinder Size: 8"- Average Dry Cycle Time: 13.4 seconds- Total Flow: 128 GPM- Oil Capacity: 320 gallons- Compressing Force: 150,800- Ram Face Pressure: 88 PSI- Feed Opening: 39"; W x 60"; L- Bale Size: 72" x 42" x 42"Infeed 48" x 22' Selco Conveyor - $19,500 Additional

MARATHON STEALTH Horizontal Closed Door BalerSpecifications: -- Cylinder: 6" -- Opening: 60" x 48" -- Ram Force: 67,900 Lbs -- Bale weight: Max. 1,400 Lbs OCC -- Main motor: 20 HP

MARATHON - STEALTH: Horizontal Closed Door BalerSpecifications: -- Cylinder: 6". -- Opening: 60" x 48". -- Ram Force: 67,900 Lbs. -- Bale weight: Max. 1,400 Lbs OCC. -- Main motor: 20 HP.

MARATHON - RJ-225: Stationary Compactor - 2-YardSpecifications -- 10 HP. -- Working condition. --The RJ-225 is the best compactor value. Built for reliable performance in commercial and medium-industrial situations, it effectively reduces solid-waste material to a fraction of its original size. It is attractively priced and features a 56-second cycle time and powerful 55,100 lbs. maximum compaction force.