WEB MECAHNICAL JET 10M Jet Air Oven Supply Side complete with the following: -- 400,000 BTUH rating, 3,200 CFM forward curved blower, 5 HP motor 575 V /3 Ph /60 Cy. -- Inlet filter section HEPA 99% DOP rated, Magnehelic gauge across the filter section. -- Thermometer to show outlet temperature, Thermostat to set and control temperature design from 60° -70° C, -- Jets designed to control flow across the belts. Exhaust Side complete with the following: -- Vane axial fan set to exhaust 600 CFM,1/2 HP motor. -- Direct drive fan with motor out of air stream, external grease fittings for lubrication.Heating Module: -- Air makeup sized for 3,200 CFM, 2 HP motor, rated for 400,000 BTUH. --Fan to exhaust through 2"; pleated filter and 12"; HEPA filter, Down discharge,3 HP motor, 3,200 CFM @ 2.0"; E.S.P. -- Engineered for 90° F temperature rise, 0.4 MBTU/hr hydronic coil, features FUJI temperature selector. Conveyor: -- Robust 10-gage steel frame, Novo 40 grey belt designed for up to 90° C and with Auto tracking mechanism. -- Large size 6"; driver and idler pulleys, Support pulleys 3"; as required. -- Heavy duty NORD gear box and a 2 HP direct coupled motor. OPTIONAL (Not included in Price):IR Adder (Lamps): -- Three (3) MW IR lamps in the center of the oven, Three (3) MW IR lamps at the end of the oven, -- Heated length of lamps 54";, dual gold plated element, 3,200 watts per bulb. -- Lamps are designed to sit between the jets on the oven with lamps 8"; (200 mm) above belt and 8"; apart. - Please add ...$ 7,700Control Panel for the above (600 V - Electric) complete with: -- Line interlock, E-stop, fuses, disconnect switch, DC power supply. -- Phase angle controller to control two (2) banks of three (3) lamps. CSA approved panel. - Please add ...$ 12,100BOILER: -- One (1) RBI dominator boiler "DB 600" to supply up to 600,000 BTUH. - Please add ...$ 18,900

WEEKE BHC VENTURE 7L CNC MACHINING CENTER (W/ATC, "C" AXIS): Specifications: Working Capacity "X" Axis is 190.5" (4,850 mm), "Y" axis is 83.5" (2,120 mm), "Z" axis stroke is 14.9" (380 mm), max. material thickness 5.9" (150 mm).Positioning Speed: "X" Axis travel speed of 328 FPM (100 MPM), "Y" axis travel speed of 164 FPM (50 MPM), "Z" axis travel speed of 66 FPM (20 MPM); The machine head travels on THK linear motion guides on all axes.Worktable: (8) Movable K-Table support rails with (3) vacuum pods per rail; (8) pneumatic back-stops, (8) pneumatic front-stops, (2) pneumatic side fence stops, (2) working zones.Boring Unit: 3 HP (2.2 kW) Motor, variable speed from 1,500 - 7,500 RPM; (25) vertical drill spindles, (14) spindles in "X" axis, & (9) in "Y" axis, and (2) offset for large 35mm drills. (6) Horizontal spindles with variable speed from 1,500 - 7,500 RPM, (2 + 2) in "X" axis & (1 + 1) in "Y" axis, grooving saw with 125mm diam. saw blade (1) NC controlled 0° - 90° "X" / "Y" grooving saw, variable speed from 1,500 - 7,500 RPM, 125 mm dia. saw blade.Machining: (1) 16 HP (12 kW) Liquid cooled electro-spindle router with HSK F63 adaptor, programmable 1,200 - 24,000 RPM, constant torque from 9,000 - 24,000 RPM, RH or LH rotation; powered by a frequency inverter. (1) NC Controlled "C" axis for 360° horizontal processing; (1) 8-position ATC tool changer magazine.Operator & Machine control: WEEKE IPC "MMC" Control + Windows "XP" + WoodWOP operating system; "Beckoff" PLC for (3/4) axes linear, circular & helical interpolation. 15" TFT color monitor, industrial keyboard for data entry, CD ROM & 1.44 MB floppy drives, modem, USB slot, RS-232 serial interface for possible simple PC connection; 40.0 GB hard drive, 512 MB of RAM, all mounted in separate free-standing control panel.Complete with: (1) 100 m³/Hr Vacuum Pump, 2-zone safety mats (will stop the machine if the operator enters the work area), and hand-held pendant controller.Under power and available for inspection.

WEEKE ABD 050 CNC BORE, GLUE & DOWEL INSERTER: -- Specifications:(1) Horizontal drilling aggregate with (1) individual spindle; with servo control of the "X" Axis; (1) glue & dowel injector with glue flow control; (1) vibrating hopper dowel feeder. -- Working Capacity:Part size: Length 20 mm - 1,250 mm (.75" - 49") Width 20 mm - 800 mm (.75" - 31.5") Thickness 10 mm - 60 mm (.4" - 2.4") thick.Machine is set up for 8 mm Dia. x 30 or 35 mm long dowels -- Work Area(2) Separate working fields with (4) pneumatic top clamps can process up to (2) parts independently on the left-hand, right-hand or center stops; work pieces can be loaded in (1) field while being machined in the other to allow fast production of varying parts. -- Operator Interface:PC Front-end with Homag Power Control PC 85T, WoodWOP 5.0 operating system with graphic programming & error messaging.17" TFT flat screen monitor, CD-RW drive, 1.44 MB floppy drive, standard keyboard & mouse; Software allows program design with automatic mirror-image by use of an active center stop located 600 mm (23.6") from zero. -- Complete with:Bar code control reader. All manuals, documentation & program disk provided with machine. -- Actual Model is WEEKE ABD 050.

WEEKE ABD 050 CNC BORE, GLUE & DOWEL INSERTER: -- Specifications:(1) Horizontal drilling aggregate with (1) individual spindle; with servo control of the "X" Axis; (1) glue & dowel injector with glue flow control; (1) vibrating hopper dowel feeder. -- Working Capacity:Part size: Length 20 mm - 1,250 mm (.75" - 49") Width 20 mm - 800 mm (.75" - 31.5") Thickness 10 mm - 60 mm (.4" - 2.4") thick.Machine is set up for 8 mm Dia. x 30 or 35 mm long dowels -- Work Area(2) Separate working fields with (4) pneumatic top clamps can process up to (2) parts independently on the left-hand, right-hand or center stops; work pieces can be loaded in (1) field while being machined in the other to allow fast production of varying parts. -- Operator Interface:PC Front-end with Homag Power Control PC 85T, WoodWOP 5.0 operating system with graphic programming & error messaging.17" TFT flat screen monitor, CD-RW drive, 1.44 MB floppy drive, standard keyboard & mouse; Software allows program design with automatic mirror-image by use of an active center stop located 600 mm (23.6") from zero. -- Complete with:Bar code reader. All manuals, documentation & program disk provided with machine. -- Actual Model is WEEKE ABD 050/12/NA.

--MAKE AN OFFER!--VERY GOOD CONDITION AND LOW HOURS!-- WEEKE ABD 050/12/NA CNC BORE, GLUE & DOWEL INSERTER, with 350 Hrs. Only!: Specifications: (1) Horizontal drilling aggregate with (1) individual spindle with 0.55 kW (3/4 HP) - 2,750 RPM Motor; (1) glue & dowel injector with glue flow control; (1) MAFU “MRA 250” vibrating hopper dowel feeder, with Bowl size 14-1/2” Dia. x 4-1/2” D. Working Capacity: Part size: Length 20 mm - 1,250 mm (.75" - 49") Width 50 mm - 800 mm (2" - 31.5") Thickness 10 mm - 60 mm (.4" - 2.4") thick. Machine is set up for 8 mm Dia. x 30 or 35 mm long dowels Work Area (2) Separate working fields with (4) 3-1/8” x 4-5/8” pneumatic top clamps can process up to (4) parts independently on the left-hand, right-hand or center-stops; work can be loaded in (1) field while being machined in the other to allow fast production of varying parts. Operator & Machine Control: PC Front-end with Homag Power Control PC 85T, WoodWOP 5.0 operating system with graphic programming & error messaging; 17" TFT flat screen monitor; Software allows program design with automatic mirror-image by use of an active center stop located 600 mm (23.6") from zero. Complete with: HONEYWELL “HYPERION 1300G-2” Bar code control reader. All manuals, documentation & program disk provided with machine. Actual Model is WEEKE ABD 050/12/NA CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars

WEEKE ABD 100 CNC BORE, GLUE & DOWEL INSERTER: -- Specifications:(1) Horizontal drilling aggregate with (1) individual spindle; (1) glue & dowel injector with glue flow control; (1) 23" Dia. x 4" D vibrating hopper dowel feeder. -- Working Capacity: Material size from 20 mm - 1,250 mm (.75" - 49") long, 50 mm - 800 mm (1.9" - 31.5") wide, 10 mm - 60 mm (.4" - 2.4") thick. Machine is set up for 8 mm dia. x 30 or 35 mm long dowels (additional dowel sizes are optional). -- (2) Separate working fields with (4) 2-3/4"; LR x 3"; FB pneumatic top clamps can process up to (4) parts independently on the left-hand, right-hand or center-stops; work can be loaded in (1) field while it is being machined in the other to allow fast production of varying parts. -- Operator Interface:PC Front-end with Windows XP + Weeke "WoodWOP 5.0" operating system with graphic programming & error messaging; USB front side bus, 17" TFT flat screen monitor, CD-RW drive, Modem, standard keyboard & mouse.Software allows program design with automatic mirror-image by use of an active center stop located 600 mm (23.6") from zero. -- WEEKE "ABD 100" is designed for small or large capacity horizontal drilling, gluing and dowel insertion; built on a Heavy Duty welded steel base; main horizontal beams hold the carriage for the boring head and glue/water injector. -- Complete with: HAND-HELD PRODUCTS "ADAPTUS 5.0 3800G04E" Handheld Barcode Reader.

This listing is for a commercial grade heater that can be used for heating your facility or if outside air is ducted in can be an air make-up unit This is designed for inside installation. It was not originally used as air make up but in mild climates will be able to be used that way with duct work that needs to be built on site by a contractor. Foot print size of the unit is 46" x 46" Height 144 "Natural gasCFM 7,500BTUH input 400,000BTUH output 320,000Fan Type belt drivenHP (1) 2 HP fanFlue size 8" qty (1)Unit weight 1,250 lbs

AUTO-V-GROOVE AVG-48 MFT UNIVERSAL V-GROOVER: -- Specifications:(1) Head automatic cross & linear V-Groover, 48" max. material width on cross-groove,Unlimited length for linear grooving, 1-1/4" max. material thickness. -- Features:(1) 10 HP - 3,600 RPM Motor, 30 mm dia. belt driven precision cutter arbor, 3-1/4" max. cutter width.2 HP Hydraulic feed motor for infinitely variable crosscut feed speed from 0 - 50 FPM & 0 - 60 FPM for linear feeding.Heavy-duty double belt feeder assembly for linear grooving. -- Includes: Adjustable pneumatic material hold-down bar.(1) 84" x 24" Main table, (1) 20" x 58" auxiliary table, (1) large 96" long floating table on rails. -- Complete with: Automatic tape applicator (12" max. dia. tape roll), manual quick crank tape applicator positioning system. -- Options Include: An assortment of V-Groove cutters as pictured.Actual Model is AUTO-V-GROOVE AVG-48-M/FT.

AUTOQUIP 60S100 Scissor Lift10,000 Lbs Cap., electro-hydraulic operation. -- Included: Optional 48" x 120" smooth steel platform and guarded foot pedal control. Base frame 32" x 87". -- 12" Lowered height, 60" travel to raised height of 72"; internally mounted 5 HP Super Torque TENV motor, 2.8 GPM, 2-cylinder design, (36) Sec travel time up-or-down. -- Complete with: Wall mount up/down push button control with 20' cord (pre-wired), velocity fuses on cylinders, and maintenance locks on baseframe. -- Options: Up to 60" x 120" smooth steel platform, guarded foot pedal control, accordion skirt. -- Autoquip Series 35, Surface mounted lift. Unit is painted AQ black;

AUTOQUIP 60S25 Scissor Lift.2,500 Lbs. Cap., electro-hydraulic operation. -- Standard 32" x 87" smooth steel platform. Base frame 32" x 87". -- 8" Lowered height, 60" travel to raised height of 68"; internally mounted 1.5 HP Super Torque TENV motor, 2-cylinder design, (44) Sec travel time up-or-down. -- Complete with: Hand held, push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe. -- Options: Up to 60" x 120" smooth steel platform, guarded foot pedal control, accordion skirt. -- Autoquip Series 35, Surface mounted lift. Unit is painted AQ black;

AUTOQUIP 60S40 Scissor Lift.4,000 Lbs. Cap., electro-hydraulic operation. -- Standard 32" x 87" smooth steel platform. Base frame 32" x 87". -- 8" Lowered height, 60" travel to raised height of 68"; internally mounted 1.5 HP Super Torque TENV motor, 2-cylinder design, (44) Sec travel time up-or-down. -- Complete with: Hand held up/down push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe. -- Options: Up to 60" x 120" smooth steel platform, guarded foot pedal control, accordion skirt. -- Autoquip Series 35, Surface mounted lift. Unit is painted AQ black;

AUTOQUIP 60S60 Scissor Lift.6,000 Lbs. Cap., electro-hydraulic operation. -- Large 48" x 120" smooth steel platform. Base frame 32" x 87". -- 8" Lowered height, 60" travel to raised height of 68"; internally mounted 1.5 HP Super Torque TENV motor, 2-cylinder design, (44) Sec travel time up-or-down. -- Complete with: Hand held up/down push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe. -- Options: Up to 60" x 120" smooth steel platform, guarded foot pedal control, accordion skirt. -- Autoquip Series 35, Surface mounted lift. Unit is painted AQ black;

AUTOQUIP 48S25 Scissor Lift.2,500 Lbs, Electro-hydraulic, 24" x 64" standard platform and 24" x 64" base frame. -- 7" Lowered height, 48" travel to raised height of 55"; .75 HP TENV motor, 1-cylinder design. -- Complete with: Hand held push button control with 10' cord. -- Options: Max. platform size up to 48" x 96", foot pedal control, accordion skirt ask for pricing.(Standard specs)

AUTOQUIP 48S40 Scissor Lift.4,000 Lbs Cap., Electro-hydraulic operation. -- 48" x 96" Smooth steel platform. Base frame 24" x 64". -- 7" Lowered height, 48" travel to raised height of 55"; internally mounted 1.5 HP Super Torque TENV motor, 1-cylinder design. -- Complete with: Hand held up/down push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on base frame. -- Options: Up to 48" x 96" smooth steel platform, guarded foot pedal control, accordion skirt. -- AUTOQUIP Series 35, Surface mounted lift. Unit is painted AQ Black;

AUTOQUIP 48S40 DL Double Long Scissor Lift.4,000 Lbs. max. cap. with 48" x 144" smooth steel platform top. -- 48" Travel with a 7" lowered height and a 55" raised height; (32) Sec up and down speed. Base frame 24" x 130". -- Power unit with 1.5 HP Super Torque Motor, 208-230-460V - 3 Ph - 60 Cy, fan-cooled, Intermittent (2 minute) duty. -- Polyethylene hydraulic fluid reservoir with a capacity of 5 gallons. Supply voltage must be specified. -- Complete with; Hand held up/down push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe, -- Option; Guarded foot pedal control.. NOTE: Surface mounted lift. Unit is painted AQ black;

AUTOQUIP 48S60 SCISSOR LIFT.6,000 Lbs Cap., electro-hydraulic operation. -- With 48" x 96" smooth steel platform. -- 7" Lowered height, 48" travel to raised height of 55"; internally mounted 1.5 HP Super Torque TENV motor, 2-cylinder design, (33) Sec travel time up-or-down. -- Complete with: Guarded foot pedal control, velocity fuse on cylinders, and maintenance locks on base frame. -- Unit is painted AQ black; .Options: Up to 48" x 96" smooth steel platform, guarded foot pedal control, accordion skirt. .

AUTOQUIP 48S80 SCISSOR LIFT.8,000 Lbs Cap., electro-hydraulic operation. -- Standard 24" x 64" smooth steel platform. -- 7.5" Lowered height, 48" travel to raised height of 55.5"; internally mounted 1.5 HP Super Torque TENV motor, 2-cylinder design, (33) Sec travel time up-or-down. -- Complete with: Hand held up/down push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe. -- Options: Up to 48" x 96" smooth steel platform, guarded foot pedal control, accordion skirt. -- Autoquip Series 35, Surface mounted lift. Unit is painted AQ black;

AUTOQUIP 36S128 DL Double Long Scissor Lift.12,800 Lbs. max. cap. with standard 24" x 98" smooth steel platform top. -- 36" Travel with a 7-1/4" height and 43-1/4" raised height; (35) Sec up and down speed. Base frame 24" x 98". -- Power unit with 5 HP remote Super Torque Motor, 240/480 V, 3-Ph, fan-cooled, Intermittent (2 minute) duty. -- Polyethylene hydraulic fluid reservoir with a capacity of 5 gallons. Supply voltage must be specified. -- Complete with; -- Hand held up/down push button control with 10' cord, velocity fuse on cylinder, and maintenance locks on baseframe, -- Options; Guarded foot pedal control, Accordion skirt, larger platforms available. NOTE: Surface mounted lift. Unit is painted AQ black; Pricing subject to change.

AUTOQUIP 36S25 Scissor Lift. 2,500 Lbs Capacity and 48" x 48" Platform with 24" x 48" base frame. -- 12-Second travel time. -- 6-1/2" Lowered height. -- 36" Travel to raised height of 42-1/2". -- Electro-hydraulic, 1-Cylinder design. -- Internally mounted Super Torque 1.5 HP TENV motor with prewired motor starter. -- 24 Volt Control transformer, -- 10' Straight SO cord with hand held up/down 24 V push button. -- 10' SO Power cord. -- Options: Foot pedal control, oversized platform up to a max. of 48" x 72".

AUTOQUIP 36S40 Scissor Lift.4,000 Lbs Cap., Electro-hydraulic operation. -- 36" x 60" smooth steel platform . Base frame is 24" x 48". -- 6.5" Lowered height, 17 Sec travel speed to a raised height of 42.5"; Internally mounted 1.5 HP Super Torque motor, 1-cylinder design. -- Complete with: Optional guarded foot control, velocity fuse on cylinder, and maintenance locks on base frame.