CATERPILLAR 953K Crawler Track LoaderSave money and transport time with one rugged machine for land clearing, digging, grading, truck loading, slope work and more. Specifications: -- Engine: Cat C7.1 ACERT -- Engine Power (maximum) – SAE J1995: 177.00 HP -- Bucket Width: 97.30" -- Fuel Tank: 70 gal -- Capacity - General Purpose: 2.40 yd3 -- Ground Clearance: 16.40" -- Digging Depth: 5.50" -- Grading Angle: 110.30" -- Operating Weight: 33,852.00 LbsEquipped with: -- General Purpose Bucket -- Enclosed Cabin -- Joystick Bucket Controls -- Pedal Steering -- Air Conditioning -- Good Undercarriage w/ 19"; Pads -- Hours: 2,214 (still in use)

CATERPILLAR 316FL Crawler Excavator Specifications: -- Reach Boom -16'9" (8'6") Stick -- Max. Digging Depth: 20' -- Max. Reach - Ground Level: 28.83' -- Max. Cutting Height: 29.25' -- Max. Loading Height: 20.58' -- Max. Loading Height: 7.5' -- Max. Depth Cut for 2440 mm (8'0") Level Bottom: 19.33' -- Max. Vertical Wall Digging Depth: 16.25' -- Bucket Digging Force - SAE: 22000 IBF -- Bucket Digging Force - ISO: 25000 IBF -- Stick Digging Force - SAE: 15500 IBF -- Stick Digging Force - ISO: 18000 IBF -- Operating Weight: 39710 Lbs. -- Max. Drawbar Pull: 35053 IBF -- Max. Drawbar Pull: 35053 IBF -- Max. Travel Speed: 3.2 MPHEquipped with: -- Auxiliary Hydraulics -- Quick coupler -- 4,176 hours

CATERPILLAR M318C WHEELED EXCAVATOR w/ SCRAP MAGNETFeatures: -- (2) sets of outriggers -- 48" Magnet -- Generator onboard for magnetHours: Approx. 4,536

CATERPILLAR 730C2 Articulated Dump TruckThe CAT 730C2 offers reliability and durability, high performance and productivity, superior operator comfort, and lower operating costs.Specifications: -- Rated Payload: 31 Tons. -- Engine: 375 HP CAT Diesel. -- Heaped SAE 2:1 23.00 yd3. -- Struck: 17.40 Yd3. -- Tailgate Heaped SAE 2:1: 24.60 yd3. -- Tailgate Struck: 18.20 Yd3. -- Transmission: 5 to 34 MPH. -- Fuel Tank: 108.8 Gal. -- Raise Time: 12.00 Sec. -- Lower Time 8.00 Sec.Equipped with: -- Tailgate. -- Articulating. -- Air conditioning and heated cab. -- Rearview camera.NOTE. Hours: 6,950; tires: 60%; box: straight; hinge: straight.

CATERPILLAR 308E2 CR Compact Hydraulic ExcavatorHigh performance and durability, and its compact radius allows it to work in areas where larger excavators can't operate.Specifications: -- Engine: Cat C3.3B 65 HP -- Operating Weight: Approximately 18,519 lbs (8,400 kg) -- Ground Pressure: 5.26 psi -- Maximum Dig Depth: Up to 163.5 inches -- Maximum Lifting Capacity: 7,385 lbs front / 5,401 lbs side -- Travel Speed: Low: 1.74 mph, High: 3.17 mph -- Bucket Rotation: 180 degrees -- Bucket Size: 24"Equipped with: -- A/C and Heated Cab -- Hydraulic Thumb -- Bolt-on Rubber Pads -- Auxiliary Hydraulics -- Mechanical Coupler -- Front Blade -- U-C 50% remaining

CATERPILLAR D3K2-XL Crawler DozerSpecifications: -- Engine: C4.4 Acert Turbo Diesel Rated Net Power 80 HP @ 2,200 rpm -- Dozer Blade: 103" (6-Way) -- Fuel tank: 51.5 gal -- Operating Weight – XL: 17,544 lbs -- Hours: 3,350Equipped with: -- Cab: EROPS (Enclosed Roll-Over Protective Structure) -- A/C and Heated Cab -- Stable Blade -- Traction Control -- Work Lights -- SBG Steel TracksThis dozer is equipped to handle tough tasks with ease. We are happy to assist in the most economical delivery to your location.

CATERPILLAR M318C Wheeled ExcavatorSpecifications: -- Engine: Cat 3056E 159 HP -- Maximum Travel Speed 34 km/h 21 mph -- Swing Speed 10.5 rpm -- Fuel Tank Capacity 385 L 102 gal -- Hours: 2,960 Equipped with: -- Joystick Steering -- Aim mechanical thumb -- NYE pin grabber coupler -- Fresh service -- 4 outriggers -- Service records available

CK POWER CKT375VM-T4 DIESEL GeneratorSpecifications: -- Engine: Volvo Penta TAD1372 Tier 4 Final EPA/ CARB Certified -- Ratings Range: 60HZ (3 phase / .8 power factor) -- Prime: 275 kW / 343 kVA Standby: 300 kW / 375 kVA -- Standard configuration: multi-voltage selector switch, 120/240V 1 Phase, 120/208V 3 Phase and 277/480V 3 Phase -- Fuel tank: 300 gallon, 17 Hour run time @ 100% load -- Hours: less than 500Equipped with: -- CK/Deep Sea custom controls -- Easy to use custom configuration -- All components are UL1446 certified -- Fork pockets and transportation tie downs -- Lockable storage -- Level 1 sound attenuation: 70 dBA @ 23 ft. -- Standard 20 amp 120 volt convenience receptacle

CLARK C20sC FORKLIFT - Cushion Tire, LPG Powered with compact chassis.Specifications: -- Basic Capacity at 24" load center, 4,000 Lbs -- Mast-Triplex Panoramic, Max. lift height 188", Collapsed Height 83" -- Full Free lift 59", Fork length 48", Chassis width 35", Overhead guard 81.1", Length to fork face 85.1", Carriage 33" Class II, propane fuel systemEquipped with: -- Side shifter with internal hosing -- Tires, Cushion Lugged Drive/Smooth Steer -- Power steering -- High capacity cooling system -- Electronic back-up alarm

CROWN RC3020-30 Stand-Up ForkliftSpecifications: Load Capacity: 3,000 Lbs -- 3-stage mast -- Max. lift height 190" -- Clearance height: 89" lowered -- Battery drive train: 24VEquipped with: -- Side shift -- cushion tires -- Overhead guard -- Power steering and SCR travel controllerNOTE: Order Picker is not running, Battery is charged, needs wiring harness

CUMMINS - 682-FDR-036JJW: 1000 K Diesel GeneratorSpecifications: -- Output: 480/277 / 3-Phase. -- 1,000 kW. -- 1,250 KVA. -- 1,504 Amps. -- 1,800 RPM.NOTE: (299) Hours on meter in factory-built enclosure. - Available for inspection!

DOOSAN DL220-5 Wheel LoaderSpecifications: -- Engine: 160 HP -- Bucket Width: 8.37ft in -- Fuel Capacity: 58.7 gal -- Max Speed - Forward: 24.3 mph -- Hours: 5,514

DOOSAN DX85R-3 Compact Crawler Excavator with Brush CutterSpecifications: -- Yanmar Engine: 59.4 HP (44.3 kW ) -- Max. torque at 1365 RPM 24.6 kgf/m (241 Nm) -- Max. swing speed: 9.5 RPM -- Boom swing angle: L/R 70° / 55° -- Travel speed: (low - high) 1.6 to 2.92 MPH (2.7 - 4.7 km/h) -- Maximum gradeability: 35° / 70% -- Hours: 350 (in use)Equipped with: -- 50" MTL XC5 Brush Cutter -- 60" Ditching bucket -- 36" Digging bucket -- 24" Digging bucket -- Hydraulic quick coupler -- Hydraulic thumb -- Front blade -- Roll Over Protective Structure (ROPS) -- Pressurized, sound-insulated cab -- Adjustable seat with adjustable headrest and armrest -- Air conditioning -- Pull-up type front window and removable lower front window -- Sliding right windows with lock -- Ceiling light

DOOSAN DL200-5 (US10) Wheel LoaderSpecifications: -- Engine Model: 1204F -- Gross Power: 142 HP -- Power Measured @ 2200 rpm -- Max. Speed - Forward: 24 mph -- Max. Speed - Reverse: 12 mph -- Fuel Tank: 45 galEquipped with: -- US10 Package -- GP Bucket -- Coupler

DOOSAN DX-180LC-3 Crawler Excavator Specifications: -- Engine Model: DL06 -- Gross Power: 122 HP -- Track Size; 24" -- Bucket: 42" -- Max Cutting Height: 29.37ft inJ -- Max Loading Height: 20.54ft inK -- Max Reach Along Ground: 28.19ft inL -- Max Vertical Wall Digging Depth: 15.29ft inM -- Max Digging Depth: 18.77ft in -- Operating Weight: 38933 Lbs -- Fuel Capacity: 74 galEquipped with: -- Auxiliary Hydraulics -- Hydraulic Quick Coupler -- Hydraulic ThumbNote: Hours approx. 4,165 and being used.

DOOSAN DX300LC-3 Long Boom Hydraulic Crawler ExcavatorSpecifications: -- Engine Type: Doosan -- Horsepower: 213 HP (159 kW / 216 PS) -- Engine Cylinders: 6 -- Boom reach: 60' -- Track width: 33.5" -- Bucket Size: 72" Equipped with: -- Joystick Controls w/ Switchable Control Patterns -- Rearview Camera -- New Bushings & Pins in Bucket Knuckle -- Hours: Approx. 3,500 (still in use)

DYNAPAC CA1500D Smooth Drum CompactorSpecifications: -- Smooth Drum: 66" -- Engine: 55 kW 75 HP @ 2200 RPM -- Operating mass (incl. ROPS) 15,500 lbs -- Operating mass (incl. Cab) 15,900 lbs -- Module mass (front/rear) 7,750 lbs/ 7,750 lbs -- Max. operating mass 18,700 lbs -- Fuel tank capacity: 50 gal -- Speed range: 8 / 12 / 12 km/hEquipped with: -- Seismic -- Hydrostatic hydraulic systems

GEHL DL10L-44 4x4 TELEHANDLER Specifications: -- John Deere 4-Cylinder Turbo Diesel EngineFeatures: --10K Lbs Lifting Capacity; Hours: Approx. 4,000

JOHN DEERE 470G LC Large Hydraulic ExcavatorSpecifications: -- Max. digging depth: 27'-2" to 29'-11" -- Engine: JOHN DEERE 6135HT997 -- Displacement: 13.5 L -- Cylinders: 6 -- Fuel type: Diesel -- kW: 560 -- Transmission: Hydrostatic 2-speed travel -- Tracks Width: 35-1/2" -- Stick length: 12'-5" -- Quick coupler: Hydraulic -- Bucket width: 60" -- Hours: 4,602Equipped with: -- TOPCON 3DMC Control -- Operators station: EROPS -- AC and Heat -- Grade control -- Counterweights -- Auto lube -- Cutting Edge: Weld-On -- Grouser Pads: Triple

JOHN DEERE 324K Compact Wheel LoaderProductive for tight turns and extra agility in close quarters.Specifications: -- Engine Power: 70 HP -- Engine type: YANMAR Diesel -- Full-turn tipping load: 9,766 Lbs -- Bucket capacity range: 1.4–2.0 cu. yd -- Bucket breakout force: 2,364 Lbs -- Operating weight: 14,087 Lbs