Woodworking Equipment For Sale

FRAMA - TC-1500, ...Hydraulic Copy Lathe With One V-Gouge Copy Head and Two Manual Top Turret Heads & Knife SharpenerHydraulic Copy Lathe with (3) different speeds during execution of the work. Possibility of manual or automatic configuration on (3) intensities: 1) Regular working speed, 2) slow working speed for difficult points reproduction, and 3) fast speed to eliminate nonproductive points. Technical Data. -- Main drive motor: 6 HP. -- Hydraulic pumping unit: 2 HP motor. -- Max. turning dia.: 300 mm (12"). -- Distance between center: 1,500 mm (59"). -- Max. cross-slide speed: 9.5 MPM (30 FPM). -- Carriage return speed: 11 MPM (36 FPM). -- Copying device stroke 75 mm (3"). -- Max. hydraulic pressure between cones: 20 KG/CBM. -- Headstock taper: MT 4. -- (8) Turning speeds: 1,000 - 1,250 - 1,750 - 2,000 - 2,250 - 2,500 - 3,500 - 4,500 RPM. Also included : -- FRAMA ATC 2005 Knife Grinder: 2 HP motor. -- (1)Steady rest 70 mm (1) 18 mm and (1) adjustable for square -- Tailstock and tool holder

FRAVOL SMART S600-23 Edgebander w/Pre-Mill & Corner Rounding:Main Specifications: -- Edge & Workpiece Capacity: 0.4 - 8 mm (0.016 - 0.315") edge; 10 - 60 mm (0.394 - 2.362") panel thickness; -- 140 mm (5.512") min. panel length and 100 mm (3.937") min. panel width. -- Feed-speed, 14 or 18 MPM (46 or 59 FPM.)Front-End Equipped With: -- Pre-Milling Station (RT/S), (2) motors @ 1.1 KW (1.5 HP), 12.000 RPM, LH & RH rotation w/pneumatic programmable jump control for chip-free and clean panel edges. Standard equipped with Dia. 60 mm x 64 mm H, with diamond inserts. -- IR Panel Heat Lamp: Improves gluing bond especially during cooler ambient temperatures and humid conditions. -- Automatic Edge magazine: For strips up to 8 mm & coil stock up to 3 mm thick PVC. -- Duo Gluing System: For regular granulate Hot Melt (EVA) and easy conversion to PUR glue. "Teflon lined" glue tank with bi-directional glue roller. Automatic temperature reduction during stand-by time. Glue tank has quick release system for maintenance or quick change to a different color or glue type. -- Side Pressure Section: (3) Pressure rollers, (1) motorized, (2) idle, pneumatic pressure control and programmable NC-positioning servo motor.Work-stations: -- End Trimming (INT 2/S): (2) motor @ 0.50 KW (0.70 HP) 12,000 RPM, automatic pneumatic chamfer 0° - 15° or total exclusion from control panel. Glides 45° on prismatic linear hardened steel guides. -- Trimming Unit (RF-S/S): Top/Bottom flush/bevel/radius milling unit, (2) motors, 0.73 KW (1.00 HP) 12,000 RPM. Pneumatic remote tilt in (2) positions, postion-1 for radius and thin edges up to 0.8 mm trimming, position-2 for flush trimming up to 8 mm edges.Equipped with banding thickness gauge block feature for quick and easy set-up/changeover. Includes 1-axis NC servo control motors for programmable change-over from thin to 8 mm solid wood edges or incremental re-positioning of the cutter head. -- Corner Rounding Unit (SYNCRO 1): Compact and easy to set up for leading & trailing edges, (1) motor 0.22 KW (0.295 HP) 12.000 RPM, electronically synchronized. Working capacity, min. 10 mm, max. 60 mm panel thickness. -- Profile Scraping Unit (RB/S): Top & bottom radius scraping for PVC - ABS edges. Heavy construction to eliminate vibrations and guarantee superior edge quality. Air blow-off jets and chip collection box. -- Clean Spray System: Top/Bottom spray nozzles applies edge cleaning solvent prior to buffing. -- Glue Scraping Unit (RC/S): Top & bottom pneumatically operated glue scraping on flat panel surface to remove potential glue squeeze-out that otherwise would coat the cloth buffing discs. -- Buffing Station (GSI/S): Top/bottom (2) motors, 0.09 KW (0.125 HP) 2,800 RPM, manual, horizontal, vertical and tilting adjustment -- Hot Air Unit PHON (GP/S): Top/bottom hot air blowers to restore PVC color after scraping. Electrical power 2,000 Watt, 0° to 600° C temperature adjustment.Complete With:• PLC Program Control, with 10.7" col

FRAVOL VSR TOP & BOTTOM TRIMMERSpecifications: -- Edgebanding thickness 0.4 mm to 3 mm, 16 mm (0.62") to 60 mm (2.36") panel thickness capacity. The rough trimming function uses vertical copy pads and one disc copier between the two cutters in a horizontal position, allowing 0.4 mm to 3mm radius edge rough trimming without replacing the cutters. Panel working height (thickness) is from 16 mm to 60 mm.Equipped with & Features: -- Two 12,000 RPM motors complete with braze welded hard metal cutters Ø 50x16- Z6. Your choice of profiles R1; R2; R3; 5°; 30°. -- The machine comes with a new, patented worktable that provides smooth panel sliding and extremely flexible edging without using jigs. -- Sliding on nylon blocks allows perfect cleaning of the panel melamine surfaces.

FRIULMAC - Dual-Feed, ...Double End Cut-Off SawFor squaring workpieces and for transportation to a Planer or Moulder with a straightening table.Specifications: -- 79" Max. (2,000 mm) opening from Saw to Saw. Motorized opening with LED readout on the control panel; left-hand fixed with left-hand fence line. -- Hopper Magazine - material capacity: Min. length: 7.87" (200 mm), max.: 79" (2,000 mm); width: 1-1/8" (30 mm) to 6-3/4" (170 mm); and thickness: 0.59" (15 mm) min. up to 2-3/8" (60 mm) max.; hopper stack height: 23-1/2" (600 mm).Each side is equipped with: -- (2) Trim saw motors, 5.36 HP each; saw blade dia. 9.84" (250 mm). -- Hydraulic feed drive unit: 4 HP (3 kW) motor. -- Trimming & throughput capacity: Up to (55) pieces/Min.NOTE: Voltage transformer for 600 Volts available with the machine

Friulmac Floormat EQ Double end TenonerEach side equipped with top & bottom trims and (1) cope heads.Capacity: -- 1,500 mm ( 59") Max. x 225 mm ( 8.86") min. opening; -- Width 30 mm (1.18"), 250 mm (9.84") -- Thickness: 10 mm (.39") min. 35 mm (1.38") max.Includes: -- Motorized opening with LCD touch screen on the control panel, -- Hopper feed Each side equipped with: -- 1st Head: Top scoring or trim saw, 4 HP motor, saw blade max 150 mm diam. with 30 mm bore, rotation 8,500 RPM. -- 2nd Head: Bottom scoring or trim saw, 4 HP motor. saw blade max 150 mm diam. with 30 mm bore, rotation 8,500 RPM -- 3rd Head: High speed Vertical cope head, 7.5 HP - 6,800 RPM, minimum tool diameter 160 mm, maximum 220 mm, arbor diameter 40 mm. -- Variable speed feed from 4 to 25 meter/min. -- SIEMENS "Simatic" Touch-screen control for most machine functions; important station adjustments with mechanical digital readouts; manual hopper feed with 9" max. width. -- Feed system with: Rubber top chain pads, overhead holddowns with continuous V-type belts.Complete with: -- Full safety sound enclosure and separate operator control console. -- Voltage transformewr for 460 volts (to be confirmed)

FRIULMAC Quadramat Single End TenonerSingle end tenoner with (4) heads with Jump cope, cope, disc sanding and disc sandingSpecifications: -- Workpiece Length: 125 - 1500mm -- Workpiece Width: 125-1500mm -- Workpiece Thickness: 13 - 40mm -- Configuration: Jump-Cope, Cope, Wheel-Sanding, Wheel-Sanding -- First Station: 7.4 HP Jump-Cope/Profiling Unit with 40mm Diameter Shaft, 6000 RPM Rotation -- Second Station: 7.4 HP Cope/Profiling with 40mm Diameter Shaft, 6000 RPM Rotation -- Thirds Station: 4.7 HP Sanding Wheel -- Fourth Station: 4.7 HP Sanding Wheel -- Variable Speed Control of Sanding Stations from 750 - 1400 RPM -- Feed Speed: 13 - 98 FPM

FRIULMAC Quadramat Double End Tenoner:This machine is set up with (4) four profiling units left and right for a total of (8) eight -- 1,500 mm (59") Max. x 95 mm (3.7") min. opening -- Loading space 1,041 mm (41") -- Thickness 10 - 100 mm (0.4" to 3.9")Equipped With: -- Hogging/ Trim - Hogging/trim - Jump cope - Cope. -- Motorized opening with LED readout on the control panel, approx. 25" infeed in front of hold downs. -- Variable speed feed 6-28 M/min. , feed motor 4.5 HP -- Feed chain 2-7/8" wide with rubberized pads -- Top pressure with non-stainable stretching wheels driven by gear motor and inverter with speed adjustment synchronously to chain feeding speed -- Infeed fence on left side -- Machine left side fixed, right side adjustable -- Complete control panelWorking Stations: -- 1st station: Profiling unit J-33 Right and Left. spindle motor 7,200 spindle 40 mm dia. with max tool diameter 250 mm -- 2nd station Profiling unit J-32 Right and Left. spindle motor 7,200 spindle 40 mm dia. with max tool diameter 250 mm -- 3rd Station : Profiling unit J-33 Right and Left. spindle motor 7,200 spindle 40 mm dia. with max tool diameter 250 mm -- 4th Station: Profiling unit J-32 Right and Left. spindle motor 7,200 spindle 40 mm dia. with max tool diameter 250 mm NOTE: machine will require some rebuilding and maintenance in regards to ball screws and Dovetail Guides per statement by current owner. They are replacing it with a new machine.

Friulmac Rondamat E End Matcher

FRIULMAC MULIREX End Matcher W Stackable SpindlesEnd Matcher With Stackable Spindle for Fast-Change-OverEquipped with: -- Two Profiling Motors: 10 HP (7.50KW) -- Two Tool Changer Motors: 0.5 HP (0.25KW) -- Two Infeed/Outfeed Conveyor Belt Motors: 1.5 HP (1.10 KW) -- Central Conveyor Belt: 3/4 HP (0.55KW) -- Minimum Part Length: 4-7/8" (120mm) -- Minimum Part Width: 1-3/16" (30mm) -- Maximum Part Width: 9-7/8" (250mm) -- Minimum Part Thickness: 1/2" (10mm) -- Maximum Part Thickness: 1-3/16" (30mm) -- Minimum Cutter Diameter: 6-5/8" (170mm) -- Maximum Cutter Diameter: 7-7/8" (200mm) -- 50MM Diameter Spindles -- 11-1/4" (285mm) Spindle length under the nut for stackable tooling -- Cutter Speed 9,000 RPM -- Four 4-3/4" Dust Ports for each spindle(2 on the top and 2 on the rear side)

FRUILMAC RANDOMAT-E End Matcher;For end-matching flooring or cabinet & entry door rails; the feed-thru system allows continuous feeding of random-length parts with any kind of profile.Specifications: -- Width cap. of 1-3/16" to 9-7/8"; length cap. of 6-5/16" x 137" length (longer lengths with additional support); 3/8" min. - 1-3/16" max. thickness capacity. -- Approx. (10) cycles/Min depending on part length & width; -- Feed system with (2) 120" long x 10" wide powered infeed & outfeed belt conveyors, parts are automatically fed & positioned with sensors, and a positive stop to the 1st vertical shaper head (a 2nd shaper head is next to the 1st one); cope cycle is automatic. -- Parts are conveyed past the 1st & 2nd shaper head, automatically reversed, and positioned to a positive stop for the 2nd cut on the other end of the part. At the same time, the 1st shaper head would be coping the 1st end of another part.Equipped with: -- Twin 7.5 HP - 7,500 RPM high-speed shaper motors, which pneumatically traverse in tandem for each cutting cycle. -- Touch-screen SIEMENS Controller, PLC controlled conveyor & shaper cut cycle for automatic operation. -- Variable feed speed conveyor line; shaper head advance with led readout on the controls. -- Cutting station with overhead holddown wheels and 4-point pneumatic clamping with (2) overhead & (2) horizontal clamps.Includes:(4) set of used tooling

FRUILMAC RANDOMAT E - End Matcher; --÷For End Matching flooring or cabinet & entry door rails or tongue and groove. The feed-thru system allows continuous feeding of random length parts with any kind of profile.÷Capacity & Description: --÷ Width cap. 1-3/16" x 9-7/8'; length cap. 6-5/16" x 137" length (longer lengths with additional support); 3/8" min. - 1-3/16" max. thickness cap. -- -- Approx. (10) cycles/Min depending on part length & width; --÷ Feed system with (2) 120" long x 10" wide powered infeed & outfeed belt conveyors, parts are automatically fed & positioned with sensors. --÷ Positive stop to the 1st vertical shaper head (a 2nd shaper head is next to the 1st one); cope cycle is automatic. --÷ Parts are conveyed past the 1st & 2nd shaper head, automatically reversed and positioned to a positive stop for the 2nd cut on the other end of the part. At the same time the 1st shaper head would be coping the 1st end of another part. --Equipped with: -- -- Twin 7.5 HP - 7,500 RPM high-speed shaper motors which pneumatically traverse in tandem for each cutting cycle. -- -- Cutting station with overhead hold-down wheels and 4-point pneumatic clamping with (2) overhead & (2) horizontal clamps. --Controller & Operator Interface: Key Pad SIEMENS Controller, PLC controlled conveyor & shaper cut cycle for automatic operation, variable feed speed conveyor line, and shaper head advance with LED readout on the controls. --÷Includes Infeed and Outfeed Conveyors

FRUILMAC - RANDOMAT E: End MatcherFor end matching flooring, cabinet & entry door rails, or tongue & groove. The feed through system allows continuous feeding of random length parts with any kind of profile. -- Capacity & Description -- Width cap.: 1-3/16" x 9-7/8'; Length cap.: 6-5/16" x 137" (longer lengths with additional support); 3/8" min. - 1-3/16" max. thickness cap. -- Approx. (10) cycles/Min depending on part length & width. -- Feed System with: (2) 120" Long x 10" wide powered infeed & outfeed belt conveyors; parts are automatically fed & positioned with sensors. -- Positive stop to the 1st vertical shaper head (2nd shaper head is next to the 1st one); cope cycle is automatic. -- Parts are conveyed past the 1st & 2nd shaper head; automatically reversed & positioned to a positive stop for the 2nd cut on the other end of the part. - At the same time, the 1st shaper head would be coping the 1st end of another part.Equipped with: -- Twin 7.5 HP - 7,500 RPM high-speed shaper motors, which pneumatically traverse in tandem for each cutting cycle. -- Cutting station with: Overhead holddown wheels; 4-point pneumatic clamping with: (2) Overhead & (2) horizontal clamps. -- Controller & Operator Interface: Keypad: SIEMENS Controller; PLC controlled conveyor & shaper cut cycle for automatic operation; variable feed speed conveyor line; shaper head advance with LED readout on the controls. -- Includes Infeed & Outfeed Conveyors

FRUILMAC - RANDOMAT-E: Random Length End MatcherFor end matching flooring or cabinet & entry door rails; the feed through system allows continuous feeding of random length parts with any kind of profile.Specifications -- Width cap.: 1-3/16" - 9-7/8"; length cap.: 6-5/16" x 137" length (longer lengths with additional support); 3/8" min. - 1-3/16" max. thickness capacity. -- (10) Cycles/Min (approx.): Depending on part length & width. -- Feed system in/out with: (2) 156" Long x 11" wide powered infeed & outfeed belt conveyors; parts automatically fed & positioned with sensors; positive stop to the 1st vertical shaper head (a 2nd shaper head is next to the 1st one); cope cycle: Automatic; driven by (2) 1-1/2 HP motors. -- Parts: Conveyed past the 1st & 2nd shaper head; automatically reversed; positioned to a positive stop for the 2nd cut on the other end of the part. - At the same time, 1st shaper head would be copying the 1st end of another part.Equipped with: -- Twin 7-1/2 HP - 7,500 RPM high-speed shaper motors, which pneumatically traverse in tandem for each cutting cycle. -- Touchscreen SIEMENS Controller; PLC controlled conveyor & shaper cut cycle for automatic operation. -- Variable feed speed conveyor line; shaper head advance with led readout on the controls. -- Cutting station with: Overhead holddown wheels; 4-point pneumatic clamping with: (2) Overhead & (2) horizontal clamps.

Friulmac Dualfeed Double End Chop Saw & Moulder Feeder Friulmac Dualfeed Automatically Trims Workpieces and Feeds into a Moulder Cutting Length: 200mm - 1500mm (8" - 59") Cutting Width: 30mm - 110mm (1.2" - 4.3") Cutting Thickness: 15mm - 60mm (0.6" - 2.4") Trim Saw Motors 5.5HP (4KW) Feed Motor 3.5HP (2.64KW) Anti-Kickback Spring-loaded Top Pressure System w/ Manual Adjustment and Readout Manual Board Length Adjustment w/ Readout Manual Blade Height Adjustment w Readout Hopper Fed Voltage: 460V 3PH

- End Matcher for the Continuous Feeding of Random Length Work Pieces - Minimum Working Length: 160mm (6.3") - Working Width: 30-250mm (1.18"-9.84") - Working Thickness: 10-30mm (0.39"-1.18") - Two 7-1/2 HP, 3ph Profiling Motors - Spindle Speeds: 6,800 RPM - Spindle Diameters: 40mm - Cutterhead Feed Motor: 1 HP - Two 1-1/2 HP Motors for Infeed/Outfeed Conveyors - Infeed/Outfeed Conveyor Sizes: 123" x 11" - Sound/Safety Enclosure - New in 2004 - Current Voltage: 460V

Sanding wheel shaper for the production of profiles on the sanding wheels. -- Template carrier holds metal or plexiglass template (same as can be used on the moulder knives). -- Spindle length 5" with 1" diameter arbor for wheel support. Handles 8" diameter wheels (3) included with the machine. -- X and Y axis on dovetail slide with lineal bearing support for smooth movement during the wheel grinding. Pneumatic clamping on grinding wheels. Depth of grinding 1.5" for raised panel. -- Tilt capabilities from 0 to + 30°. -- Grinds all types of varda wheels on 1 HP motor with speed of 1,750 RPM. --You can customize this machine to you needs.

G & P - EPN, ... Pump Sander (Double-Sided), -- Double-end direct-drive pneumatic Drum Sander. -- 2 HP Motor - 3,600 RPM motor speed. -- (2) 1-1/4" Dia. x 10" long shafts.

GANNOMAT - 260: Case Clamp (Semi-Automatic) Specifications 100" x 50" x 26" Clamping Cap. -- (3) Vertical combination air cylinders & shoes; mounted on horizontal beam for top pressure; 0.33 HP motor for up/down travel. -- (2) Combination air cylinders & shoes mounted on adjustable vertical, side pressure beam. Vertical beam locks in place with: (4) Air cylinders and rides on bearings for quick and easy positioning. -- Push button operated w/independent pressure control for top or side; air pressure up to 125 PSI (Clamp shoe assemblies are interchangeable from vertical to horizontal). -- Complete with:Pressure gauges; timer control with: (0 - 30) Min setting.

GANNOMAT CONCEPT 70/170 EASY, ...CASE CLAMP (SEMI-AUTOMATIC):Specifications:This solid platen Case Clamp is specially designed to save space, time and labor in all production situations. Whether it is your only Clamp or a second Clamp, the "Easy 70" gives you faster cabinet assembly production.Features: -- Minimal floor space required: Length (79"), Width (32"), Height 82.6". -- Pressing force is exerted along the horizontal axis of the dowel joint by the side pressure beam. -- Continuous working surfaces (fixed sidewall and side pressure beam) eliminates setup time for carcasses with fixed shelves, stretcher rails, etc., and small carcasses like drawer boxes.Working Capacity: -- Min. clamping width 6";, max. clamping width 51.2";, max. clamping height 66.9". Equipped with: -- Adjustable Clamping cycle time w/auto. opening. -- Simple operation by directional push buttons. -- Potentiometer for stepless adjustable pressing force. -- (3) Pressing velocities and adjustment rates: 5, 10, and 25 MPS (with fine positioning or creep feed). Actual Model is GANNOMAT -CONCEPT 70/170 EASY

GANNOMAT CONCEPT 70 ECO CASE CLAMP CASE CLAMP (SEMI-AUTOMATIC) + GANNOMAT INJECTA Glue Gun/Application device: -- SpecificationsMultipurpose Case Clamp with Interlocking vertical & horizontal pressure beams specially designed to save time & labor. -- Clamping pressure is applied across the entire vertical & horizontal beams for clamping of case goods, drawers, etc. -- Working CapacityLength: Min. 6" (150 mm), max. 98.4" (2,500 mm); height: Min.: 6" (150 mm), height max.: 51" (1,300 mm); depth max.: 27-1/2" (700 mm). (2) Potentiometer for step-less adjustable pressing force; adjustable clamping cycle time with automatic opening.Minimum pressing force 300/500 kG; max. pressing force 2,200 kG.(4) Pressing velocities & adjustment rates: 5 /10 / 25 / 50 mm/Sec (with fine positioning/creep feed). -- Operator InterfaceElectronic controller with: Keypad for the following functions: Manual operation; (6) individual push buttons for (8) motion sequences; pressure regulation; workpiece count; clamping dwell time. -- Options include:Optional GANNOMAT INJECTA Glue Gun/Application device. -- Actual model is: GANNOMAT CONCEPT PLUS 70 ECO +