Woodworking Equipment For Sale

DEKKER VMAX 40 HP VACUUM PUMP (LIQUID RING): 40 HP Oil sealed, liquid ring, compact motor mounted Vacuum Pump System; 550 CFM; max. 29" Hg. -- Heavy-Duty ConstructionCompact design, small footprint. -- Direct Drive with:Low speed (1,750 RPM) Air cooled design &low operating noise level eliminates the use of V-belts, resulting in very low maintenance and zero downtime over the full vacuum range without overheating.

DEKKER VMAX 40 HP VACUUM PUMP (LIQUID RING): 40 HP Oil sealed, liquid ring, compact motor mounted Vacuum Pump System; 550 CFM; max. 29" Hg. -- Heavy-Duty ConstructionCompact design, small footprint, patented, high efficiency "DX-5" separator eliminates oil carry over concerns; Engineered for continuous operation. -- Extended lifeSeal-fluid is not used as a lubricant.Change interval is not critical, resulting in a minimum of (10,000) Hrs. of continuous operation.Sturdy bearing pedestal mounts to standard NEMA, C-face motor. -- Direct Drive and with:Low speed (1,750 RPM) eliminates the use of V-belts, resulting in very low maintenance and zero downtime.Over the full vacuum range without overheating. Air cooled design and low operating noise level.

DEKKER VMAX 40 HP VACUUM PUMP (LIQUID RING): 40 HP Oil sealed, liquid ring, compact motor mounted Vacuum Pump System; 550 CFM; max. 29" Hg. -- Heavy-Duty ConstructionCompact design, small footprint, patented, high efficiency "DX-5" separator eliminates oil carry over concerns; Engineered for continuous operation. -- Extended lifeSeal-fluid is not used as a lubricant.Change interval is not critical, resulting in a minimum of (10,000) Hrs. of continuous operation.Sturdy bearing pedestal mounts to standard NEMA, C-face motor. -- Direct Drive and with:Low speed (1,750 RPM) eliminates the use of V-belts, resulting in very low maintenance and zero downtime.Over the full vacuum range without overheating. Air cooled design and low operating noise level.

Delta Table Saw 5 HP 230 volt 3-phase

DELTA - UNISAW: Table SawSpecifications -- 10" Blade dia.; 3 HP - 3,450 RPM motor belt drives 5/8" dia. arbor @ 4,000 RPM; arbor tilts: 0° - 45°. -- 3-1/8" Max. depth @ 90°; 2-1/8" max. depth @ 45°; 25" max. rip cap. to right of blade & 15-1/2" max. to left of blade; 13/16" max. dado width. -- Includes: 27" x 40" Cast iron table; distance front edge of saw to blade 12-1/4"; 34" table height; DELTA Rip Fence; (1) set of dado blades.

DELTA 11-990C 12" 5-Speed Bench-Top Drill PressSpecifications: -- Table size 8-1/2" x 8-1/2" with 15-1/2"; x 40"; x 11/16"; Thick Plywood top, Table tilt 40° Left/Right. -- Base size 8-1/4" x 8-1/4". -- Quill travel 2-3/8", Chuck capacity 1/2", JT33 Spindle taper. -- Spindle speeds 620, 1,100, 1,720, 2,340, & 3,100 RPM.Equipped with: -- 1/3 HP - 1,720 RPM Motor.Complete with: -- Portable Wood Cabinet.Dimensions with cabinet: 41" x 36" x 57" H

DELTA - 22-650, ...Single Planer.DELTA/INVICTA 12" Table Top (no stand) Single Planer equipped with: 2 HP motor; 3-knife round cutterhead; with rollers.Capacity of 12"; feed rate of 15-1/2 FPM.250 LBS

Delta RC-63N 24" PLANER WITH SPIRAL CUTTER HEADSpecifications -- 24" x 9" Cap., 5/16" max. material removal, -- 10-1/2" min. part length. -- 15 HP Belt drive motor, -- Spiral Cutting Head -- 5,000 RPM, variable feed speed from 20 - 60 FPM.Equipped with & Features -- Powered raise and lower of 25" x 35" table, -- Sectional chipbreakers, sectional infeed roller & dual outfeed rollers. -- Push button magnetic control, -- Dust hood, & grinding attachment to sharpen helical head knives while on the machine.

DELTA RC-51 PLANER20" x 9" Cap., 7.5 HP motor, 4-knife cutterhead, power raise-and-lower adjustment and fine adjustment thru a convenient hand wheel; variable feed speed 16 - 28 FPM; equipped with sectional chipbreakers, adjustable bed & dual outfeed rollers. Actual model 22460

Delta Radial Arm Saw

Delta Horizontal Boring Machine Model SP-131

DEPENDABLE - 203, ...Cold Press40" x 102" Cap., side loading on 102" sideSpecifications: (3) Split upper platens: 34" wide x 40" deep; split platens can be interlocked for single platen operation. 45" Max. daylight opening with 12" down stroke hydraulic cylinders. (6) Rows of pop-up rollers in machine bed for loading & unloading. (3) 7-3/4" Dia. hydraulic press cylinders from the top; (1) per platen. Hydraulic power pack with 10 HP motor mounted on floor at end of Press.

DETEL M-2H DOUBLE ROW LINE BORER.(2) Line boring heads of (25) spindles each on 32 mm centers, drills from the bottom up.Equipped with: -- (2) 2 HP motors drive spindles at 3,400 RPM. Hand crank adjusts the opening between heads from 5" - 25" w/mechanical digital readouts, drilling depth up to 2" -- Hardened steel gears that are pressed onto the spindle shafts, 120" back fence with (4) large flip-stops. -- (2) Pneumatic index pins with independent switches for sequence boring on long side panels. -- (2) Overhead pneumatic hold-downs. -- Complete with standard screw-in 10 mm collets; air/electrical controls, pneumatic oiler, and foot pedal actuator for clamping & boring cycle.Optional: Dust Collection on each head. Quick change collets.

Detel M-2H Boring Machine (2) 25-Spindle Boring Heads

ADWOOD/DETEL - M29: Construction & Line Boring Machine (32 mm) Vertical/horizontal drilling: (29) Spindles; drills vertically from the bottom-up; horizontally from the back or any angle between 0° - 90°; tilting action of boring head is pneumatically controlled.Distance between the 1st & last spindle: 35.2"; max. boring depth: 3"; boring head with: (2) 2 HP - 2,800 RPM Motors; 44" x 21.4" table size.Complete with: (4) Pneumatic holddown cylinders; left- & right-hand side fences with: (2) Mechanical flip-stops & foot pedal control for clamping & boring cycle..

DEVAIR 447 15 HP 2-Stage Horizontal Tank-Mounted Air Compressor Specifications: Cap. 51.8 CFM, Max. pressure 175 PSI. Complete with: 120 Gallon Cap. 24” Dia. x 60” L Horizontal Air Receiving Tank. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

Several Dewalt Radial Arm Saws

DEWALT GA 16" Radial Arm Saw Specifications: -- 5 HP TEFC Saw motor; 16" dia. blade; 1" x 3-1/8" saw arbor; 4" thickness cap. @ 90°, 19" crosscut cap., cutting 1" board with long arm. -- Complete with: -- Blade guard, magnetic starter, stand, carriage return mechanism. -- Optional: -- VFD brake ($ 1,500). -- Photo not of actual machine.

DEWALT - 35 Series Super Duty, ...22" Radial Arm SawSpecifications: -- 7.5 HP TEFC Saw motor; 22" dia. blade; 52" long arm; 1" x 3-1/8" saw arbor; 7" thickness cap. @ 90°; 26" crosscut cap.; 40" rip cap. -- Complete with: -- Blade guard, magnetic starter, stand, and carriage return mechanism. -- Optional: -- VFD brake ($ 1,500).

DEWALT GE 20" Radial Arm Saw Specifications: -- 7.5 HP TEFC Saw motor; 20" dia. blade; 1" x 3-1/8" saw arbor; -- 6" Thickness cap. @ 90°, 27" max. crosscut cap. cutting 2" board; 42" rip cap. with 52" long arm; 2" dado capacity. Complete with: -- Blade guard, magnetic starter, stand, carriage return mechanism. Includes: -- (1) New 20" blade.Optional: -- VFD Electric brake ($ 1,500) - Recommended.Note: Photos are not of actual machines, but they represent the state of "Reconditioning"