Band Resaws For Sale

CANTEK HB-800 32" Vertical Band Resaw32" Wheel diameter, 20 HP motor Vertical Band Saw;Specifications: -- 3.543" (90 mm) wheel width, 30-5/8" throat capacity, 15-3/8" under guide capacity. -- 4" Blade width X 216- 217-1/8" blade length. -- 20 HP main motor, generates a blade speed of 5,024 SFPM.Features: -- Heavy fabricated steel machine frame. -- Specially designed Bakelite guide blocks provide rigid side blade support for straight cutting. -- Large cast iron work table is precision ground & can tilt to a maximum of 45°. -- Convenient blade tension adjustment by means of a handwheel and gauge. -- Cast iron upper and lower saw wheels are precision machined and dynamically balanced. -- Rack & pinion blade guide adjustment. -- Wheel is crowned for proper blade tracking & added stability of the blade.Complete with: -- Foot brake for braking wheels & blade. -- Blade lubrication system and reservoir for lubricant keeps blades cool.Including Electrics to UL/CSA - all starters -- Auto Start-Delta control for main motor with Emergency Stop Switch -- Telemecanique brand magnetic switchHF-150A Feeder: -- 1 HP motor with variable feed speed from 16 - 66 FPM; 6" feed opening. -- Pneumatic tensioned feed roller. -- Feed pressure is adjustable. -- Feed roller opening & closing is controlled by a foot switch for operator convenience. -- Knurled steel roller.

Cantek Horizontal Resaw Great Condition Very Low Hours Voltage 230/480/3

2019 | YGDM G-300 W/ Return Conveyor | 380V

Custom Single Head Band Resaw 20" Belt x 11" High Put Through

Line shaft Ready Single Head Resaw with Return

4- Head customer built resaw 6" Wide belt Hydraulic hold down rollers 15 HP Motors on each head Pneumatic tension

DANCKAERT - 44 , ...ResawAir Strain 44"; x 5"; Bandsaw.Features & Specifications: -- McDONOUGH Center Split Feed Works. -- Wheel is supported on both sides - not cantilevered. -- Pressured guides. -- McDONOUGH Infeed Rolls. -- Max. Cut: 14";. -- New Dynamic brake. -- 60 & 100 HP. -- Control Cabinet (has battery backup and resistors to prevent spikes). -- Infeed & outfeed systems are the same. -- 24 ft. Long Camel Back chain (has air bags that are controlled by photo cell to raise & lower and index 1-board at a time). -- Max. length of lumber: 24 ft.From Seller: "The machine has a new VFDD 100 HP and a new WEG Severe Service 60 HP motor. All new hydraulic motors, caramel back chain, and roll cases."NOTE: Needs hydraulic unit.

Farano Line Bar Resaw Machine# SR-15773 Model# BS-72

G-Tek Band Resaw with 12"x12" Capacity, 40hp Motor s/n: 84.124.0804.27.C.0.B.0.0.1.1.36 model: Runaround

G-Tek Band Resaw with 12"x12" Capacity, 40hp Motor s/n: 84.124.0804.27.C.0.B.0.0.1.1.36 model: Runaround

G Tek Grade Runaround Band Resaw with Complete Runaround System

G Tek Single Head Grade Band Resaw With Complete Run Around System, Cab and Set works, 5 Way Seperator. Just about the Same as a Brewco B-1600. Additional Pictures available on Request

Go Fast 5-Head Resaw Unit was cut into two pieces and can be put back together with a weld in the middle. Approx layout is 31' x 8'

Go Fast Resaw 15 HP Motor Put under power to test, never put into production.

2023 Go Fast 6x12 Resaw Has minimal use

2022 GoFast Single head Resaw- only used 6 months! #00902

GoFast 2-Head Resaw 10 HP main motors Go Fast Board Deduster

GO FAST 2-Head 6 X 8 Master Resaw w/6" x 8" Cut Cap. Specifications: -- 15 HP TEFC motors, max. blade height 5-3/4" from conveyor belt x 8" wide; 20"; dia. bandwheels; self-contained hydraulic system with feed speed from 0 - 150 FPM, 6" wide feed belt conveyor and return; and top mounted holddown wheel. -- Complete with: -- Pneumatic blade tensioning system; heavy duty 2-7/16" arbor and bearings; easy crank for adjustable blade position; 3" right-side fences. -- Includes: -- Operator return table; 15'-1" x 1" wide bandsaw blades; 4" square dust chutes (square to round transitions available). Options available: -- Secondary hold-down wheel; outfeed speed-up roller; ripsaw fence attachments; & more.

GO FAST 6 X 12 Master Resaw w/6" x 12" Cut Cap. Specifications: -- 20 HP TEFC motor, max. blade height 5-3/4" from conveyor belt x 12" wide; 20"; dia. bandwheels; self-contained hydraulic system with feed speed from 0 - 150 FPM, 10" wide feed belt conveyor; top mounted holddown wheel. -- Complete with: -- Pneumatic blade tensioning system; heavy duty 2-7/16" arbor and bearings; easy crank for adjustable blade position; 3" right-side fences. -- Includes: -- Operator return table; 15'-1" x 1" wide bandsaw blades; 4" square dust chutes (square to round transitions available). Options available: -- 22 HP Gas Engine; 10 HP 1-Phase; 575 Volt 3-Phase; secondary hold-down wheel; outfeed speed-up roller; ripsaw fence attachments; & more.

Go-Fast Single Head Resaw Self-contained hydraulic feed with air bag band tension. ( NO motor ) In good condition. Make an OFFER today.