Pallet Equipment For Sale

JESCO 211362 Self-Dumping Hopper. Super Heavy Duty Construction. -- Huge 6,000 Lbs Cap. and 2-1/2 cu. yd. Hopper. -- 7-Gauge all-welded body for long equipment life. -- Dimensions 64" L x 59-1/2" W x 51" H with 3" H x 11-1/4" W x 30" L fork openings. -- Engineered to dump when the locking mechanism is tripped and to return to the upright position when empty. -- Safety retaining chain. -- Can be stacked (3) high when empty. -- Option: Casters, Lids -- Unit weighs 930 Lbs.

JESCO 211371 Self-Dumping Hopper. Super Heavy Duty Construction. -- Huge 6,000 Lbs. Cap. and 2-1/2 cu. yd. Hopper. -- 7-Gauge all-welded body for long equipment life. -- Dimensions 71" L x 65" W x 59" H with 3" H x 10" W x 39" L fork openings. -- Engineered to dump when the locking mechanism is tripped and to return to the upright position when empty. -- Safety retaining chain. -- Unit weight 1,250 Lbs.

JESCO 211381 Self-Dumping Hopper. Super Heavy Duty Construction. -- Huge 6,000 Lbs. Cap. and 4 cu. yd. Hopper. -- 7-Gauge all-welded body for long equipment life. -- Dimensions 71" L x 85" W x 59" H with 3" H x 10" W x 39" L fork openings. -- Engineered to dump when the locking mechanism is tripped and to return to the upright position when empty. -- Safety retaining chain. -- Unit weight 1,385 Lbs.

JESCO 211451 Self-Dumping Hopper.Super Heavy Duty Construction. -- Huge 10,000 Lbs. Cap. and 10 cu. yd. Hopper. -- 7-Gauge all-welded body for long equipment life. -- Dimensions 91" L x 135" W x 70" H with 3" H x 10" W x 50" L fork openings. -- Engineered to dump when the locking mechanism is tripped and to return to the upright position when empty. -- Safety retaining chain. -- Unit weight 3,500 lbs.

JESCO 211551 Self-Dumping Hopper.Super Heavy Duty Construction. -- 4,000 Lbs. Cap. and 2 cu. yd. Hopper. -- 10-Gauge all-welded body, 8-Gauge base for long equipment life. -- Dimensions 64" L x 59" W x 46" H with 2-1/2" H x 14" W x 48" L fork openings. -- Engineered to dump when the locking mechanism is tripped and to return to the upright position when empty. -- Safety retaining chain. -- Unit weight 705 lbs.

JESCO 211751 Self-Dumping Hopper.Super Heavy Duty Construction. -- 2,000 Lbs. Cap. and 2 cu. yd. Hopper. -- 12-Gauge all-welded body with 8-Gauge base for long equipment life. -- Dimensions 64" L x 59" W x 46" H with 2-1/4" H x 14" W x 48" L fork openings. -- Engineered to dump when the locking mechanism is tripped and to return to the upright position when empty. -- Safety retaining chain. -- Unit weight 600 lbs..

Kent Block Saw. #00877

The used Kent Single Head Resaw is designed for efficient band resawing, ideal for pallet operations. It features a setup that's ready for line shaft integration and comes with two additional 30-inch recrowned band wheels and extra bearings for enhanced durability. This resaw is also equipped with 52 new 15'10" bands, providing extended use before requiring new supplies. Please note that while the equipment is functional, the return mechanism requires some attention to ensure optimal performance. The condition of the resaw is sold as is, making it a great option for those who might have the capability to perform minor repairs or adjustments.

Kent Chop Saw | 480V | 3 Phase

Kentwood R340SM3 Gang Rip Saw w/ Two Moveable BladesSpecifications -- Saw Blade Motor - 50 HP -- Saw Arbor Diameter - 55mm/2. -- 165" Saw Arbor Height Adjustment 1/4HP Motor -- Saw Arbor Length: 340mm -- Feed Motor - 3HP -- Variable Speed -- Feed Chain Width -- 15" Infeed Pressure RollsEquipped with & Features -- Push-Button Controls for Saw Wired for 460V 3PH -- Infeed Anti-Kickback Fingers -- Outfeed Pressure Rolls -- Sound/Safety EnclosureInfeed System -- Advantage Rip I Infeed -- Deck Size: 140" x 85" -- Photo-Eyes Every 12" -- Measure for Board Shape, Width, and Nominal Length -- Two Pin-Stops Standalone -- User Control Pedestal with Beckhoff -- Touch-Screen Year: 2015

Kenwell Chamfer Machine

The 2872 Keystone Double Head Notcher is a reliable used pallet stringer notcher, designed to efficiently process various pallet sizes. Equipped with two robust 30 HP motors, it provides excellent performance and durability. This machine is capable of handling material lengths ranging from 28 inches to 72 inches, making it versatile for different pallet notching requirements. Built by the trusted manufacturer Keystone, this notcher is in great working condition and offers consistent precision for your pallet production needs. Its double head design ensures increased productivity by allowing simultaneous notching, reducing time and labor costs. An ideal choice for businesses seeking a cost-effective, yet powerful solution for pallet fabrication, the 2872 Keystone Double Head Notcher is a dependable option for enhancing production capabilities in your operation.

LM Bump Rollcase Package Saw Includes waste conveyor under saw and elevated conveyor 550v/3 phase Approx 55" Bar Already dismantled and ready to load, as shown in the last two photos.

L & M Verticut 2000 Saw bars, LM unit saw bars Overall length 68”+- 5 bars available Used Saw chains available Contact us for a delivered price

B21-404 | Laguna | HP 125 | 2022

B21-404 | Laguna | HP 125 | 2022

LANTECH Q-300 Semi-Automatic Stretch Wrapper with Low-Profile RampSpecifications: -- Maximum versatility. Wraps large, tall, heavy or fragile loads including doors, windows and more. Production speeds 25 - 35 loads per hour. -- Maximum load size: Diagonal 73.5", Height 80", Weight 4,000 Lbs., Film roll diameter 10", Film web width 20".Equipped with: -- 65" Diameter Low-profile turntable with Variable speeds 0 -12 RPM & 3/4 HP TEFC. -- Power-roller stretch system - 200%. -- Micro-controller programmable control, Low-profile ramp.

Lantech Stretch Wrapping Machine Automatic, 3'x5'x10' tall, Computer controls, Power roll conveyor with turntable, No motor on turntable

LEADERMAC SYC 300M Heavy Duty Roll Feed Ripsaw: Features & General Description: -- Cast Iron base with easily accessed Anchor Bolts; lift up sound enclosure with light for quieter and safer operation; Hydro-Loc Outboard Bearing System for best gang sawing shaft support, includes grease gun; HD Cardan shaft feed (chainless) drive throughout. -- (6) Full width, close coupled driven top feed rollers; (4) full width driven bed rollers; top rolls are air tensioned; variable pressure controls on top feed rolls; motorized lift to top rolls; infeed table is hard chromed with approx. 0.012"; - 0.014"; chrome. -- Easily adjusted roll holdover on the infeed table; saw spindle has motorized lift and lowering; multiple HD V-belt driven saw spindle with special HD belt tensioner; saw blades cut from below, hence better dust removal and a heavier sturdier design. -- Saws are pre-mounted on a slip-on sleeve for quick change; (3) sets of anti-kickback devices included; central lube system; pneumatic pressure controller safety switch – if air pressure to the top rolls drops below the set to run level, the feed will automatically stop. -- Controls include: VFD Control to feed speeds and Digital Speed Readout in FPM or MPM; TECO-WESTINGHOUSE main electric motor; I.E.C. – TELEMECANIQUE-SQUARE-D Electricals meet or exceed UL/CSA Standards. -- Machine is equipped with WYE-DELTA Soft-Start (low Amperage) starters & main disconnect, multiple “E-Stops" operate at low amperageSPECIFICATIONS: -- Max. thickness, 5.1"; (130 mm); Note – to 4-1/2"; with std. 14"; diameter blades; to 5.1"; with optional 16"; Blades. -- Saw sleeve usable length of 12.3"; (312 mm) - max. dist. between outside saws; minimum length material, 10"; (250 mm) – at slower speeds. -- Saw Blades with 10"; min. to 14"; max dia. x 70 mm Bore (double key), 16"; (400 mm) optional – no charge; Saw spindle with 50 mm dia. runs at 3,200 RPM; Saw sleeve – included, 70 mm OD with double keyways. - Includes (1) set of spacers. -- Main Motor – 75 HP (50, 60, or 100 HP optional); top feed rolls – rise & fall, 1 HP; Feed Drive of 7.5 HP with VFD infinitely variable speed control, 20 to 165 FPM (6 to 50 MPM) to 200 FPM – 60 MPM – optional). -- (4) 150 mm Dust collection outlets; approx. weight – net, 5,060 Lbs.; WYE-DELTA – low Amperage - Soft Start for main motor starter; electrics to UL/CSA Standards and wired to 230/460 or 575/3/60. - Note: Stock machines are with 50 HP – 460/3/60 electrics machine and can be easily and inexpensively transformed to other voltages.Optional Extras. -- 75 KVA Auto Transformer to run machine on 230/3/60 electrics, please add ...$ 2,045. -- 16"; (400 mm) Dia. blade with 5.1"; max. Thickness N/C; NOTE: – Contact us to see if stock machine has this capacity. -- Extra Saw Sleeve, add ...$ 995. -- Additional Sets of spacers for saw sleeve, P.O.R. -- 20 MW Laser & Laser Holder w/12"; Bolt o

LEADERMAC LMC-101-900 HD 36" HD Multi-Blade "Roll Feed" RIP SAWSpecifications: -- Working width: 0.6"; – 36"; -- Working thickness: 0.4"; – 4"; -- Up & Down motor: 1 HP -- Feed motor: 7-1/2 HP with VFD -- Spindle HP: 75 HP, larger motors optional -- Spindle diameter: 3.15"; double keyed -- Spindle RPM: Std. 4,000 RPM, 5,000 RPM optional -- Saw Blade Diameter, 14"; diameter -- Feed speed, infinitely variable: 20 – 50 FPM, 100 or 200 FPM optionalStandard Features: -- Extra Heavy Main Frame – Stress Relieved -- Sound & Safety enclosure included – with internal strobe-free lighting -- High Precision Spindle - Double Keyed assembly with Hydro-Lock outboard bearing assembly on outboard side -- Spindle assembly slides out on support for Quick, Easy and Precision Saw Setting & Changing -- Hardened & Hard Chromed Feed Tables -- (7) Sets of Top Power Driven Rolls – full width -- (5) Bottom Power Driven Rolls – full width -- Infinitely Variable Pneumatic Pressure to Top Feed Rolls -- Top & Bottom Feed Rolls driven by Cardan Shaft Drive with HD Gearboxes Interconnected -- 1st Top & 1st Bottom Powered Roll Combination and then (2) Rows Anti Kick Back Finger Units Full Width and then to the rest of the Powered Top & Bottom Rolls provide the best Feeding Capability with excellent safety features -- HD VFD – 7-1/2 HP Feed System – Infinitely Variable -- Main motor has Wye-Delta low amperage soft start -- Electrics are 230, 450 or 575 volts 3/60 with all controls to CSA/UL Specifications -- Documentation: Maintenance manual, Operation manual, Electrical diagrams, Parts list & Tool Box (Electronic Version on Request) -- (8) Dust outlets consisting of (4) top & (4) bottom 6"; diameter dust hoods -- Saws, Dado Heads &/or cutterhead(s) and spacers optional extra Options Included In Price: -- Hanging Control Panel – in lieu of Control std. setup as shown in machine photo, Included -- Moveable Main Electrical Panel with 10 ft. of main cable, Included -- Amp Meter for the Arbor Motor, Included -- 4"; Thickness capacity in lieu of standard 2"; thickness, Included Available Options: -- To 3" Thickness Capacity – using 12"; blades, P.O.R. -- To 3"; or 4"; thickness Capacity – using 14"; blades, P.O.R. -- To 100 FPM Top Feed Speed – Infinitely Variable – 4"; Thickness Capacity, POR -- To 200 FPM Top Feed Speed – Infinitely Variable – 2"; max. Thickness, P.O.R. -- 100 HP saw spindle motor, P.O.R. -- 125 HP saw spindle motor, P.O.R. -- 150 HP saw spindle motor, P.O.R. -- Front or Rear 10 HP Side Heads (Please discuss if interested), P.O.R. -- 15 HP or 20 HP Side Head motors in lieu of 10 HP, P.O.R. -- Adjustment of the Rear guide with digital readout from the front of the machine (only desirable if Side Heads are supplied), P.O.R. -- Scoring Saw Arbor ahead of main saws if desired, P.O.R. -- Saw Spacers for Main Arbor quick Setup, P.O.R. -- Mechanical Quick Lock Saw collars if de