One (1) Used Turner Model E-52, 52" Rollfeed Resaw with AC-electric driven feed rolls. With AC inverter. All ball and roller bearings throughout. Mechanical weight strain. Wheels are 6-3/8"-wide solid disc-type, with top wheel having 1"-thick rim. Rolls will either center split or gauge saw, and tilt up to 25º. Maximum opening is 10" inside saw, 11-1/4" outside saw, and 26" under guide. Four (4) feedrolls are 7-1/2"-diameter, 15"-high, and run in ball bearings. Saw speed 7450 FPM. Feed speeds 10-300 FPM. Blades required 7" x 26', 18 - 20 gauge or will run disposable saws in the 1” to 2” range. Weight approximately 10,000-lbs. Appears in excellent condition. Upper wheel guard, drive belt guard, and 60HP 220/440V ball bearing motor. Serial No. E1000. See photos of Turner E-52 Rollfeed Resaw on our web site. Inventory No. 11084P. Located at our Portland, Oregon facility. Click on link for photos. http://www.machinerysales.com/equipment.php?item=11084

BAKER Model 3640E Blue Streak Electric Sawmill Like New BAKER Model 3640E Blue Streak Electric Sawmill S/N 07-570. 36” diameter log x 24ft. maximum length 40 HP main motor with 10 HP HPU wired for 460 volts, separate control panel on pedestal to turn the system on/off. Includes an Inline Debarker cutter that travels with the head while it travels down the log. Has the Trailer Package, and 10” wide x 12ft. Roller Conveyor Model BCS-O S/N 07-642 for the outfeed, with manual foot pedals kickers to send the boards to the right or the left, and includes lots of extra sawblades. Current new price over $100,000. This was built in 2007 but has had very little use and has been stored inside. See photos of on our web site. Inventory No.KF1.

BAKER Model ABX Horizontal Band Resaw Like New BAKER Model ABX Horizontal Band Resaw S/N 08-397. 12” wide x 12” high cutting capacity with 30 HP 460 volts main motor with build in HPU unit has the optional outfeed rubber conveyor roll down to run thin material, the tilting feature to run bevels with the Smart Tool digital readout, and it has 12” wide x 86” long belt conveyor on the Infeed run of the machines HPU it is stand alone. Machine is on casters so it is easy to move in & out of position, it also has Easy Quick Change Electrical plugs. Includes lots of extra sawblades. Machine was built in 2007 and has not been used and stored inside. Dimensions machine: Length 84" x width x 72 1/2" x height 68" Weight 2000 lbs., Current new price prox $29,000. See photos of on our web site. Inventory No. KF2 .

Brewco B-1600 16” X 16” Horizontal Resaw, Left Hand, Serial number BEK12836. 75hp TEFC 230/460V saw drive motor. Traveling steel bed chains. Hydraulic variable speed drive. Hydraulic Linear Positioner saw setting. Does not include setworks computer, HPU, or operator's console. Uses 2” wide blades. Includes 13' x 7' wide infeed table with rolls, infeed chains, and cant flippers, 9' x 10 wide outfeed table with rolls, discharge chains, and stops, 20' long return rollcase, and 10' x 10' 4-strand inclined cant deck, all hydraulic powered. HPU's priced separately. Low hour late model system and all components appear in very good condition. Inventory No. 12444. Price, As Is, FOB Portland, OR -----------------------------------------------$24,500.

Holzmag Type Elan Super 60 Briketting/Fire Log Machine. Unit is complete with dust collection and controls. It was most recently installed making fire logs from waste paper. Dust collection portion has 65- 6" dia. x 54" bags for approx. 455 sq. ft. of cloth. Bag cleaning is by shaker. The fan has a 11KW motor and the hydraulic unit has 11KW and 3 hp. The oil cooling units have 1.5 hp and .25 kw. See photos Holzmag Type Elan Super 60 Briketting/Fire Log Machine of on our web site. Inventory No. 12521. Located at our Portland, Oregon facility. Click on link for photos. http://www.machinerysales.com/equipment.php?item=12521 Price, FOB Portland, OR ----------------------------------------------- $22,500.

Kockums L&B 7’ Late Model High Air Strain Right Hand Bandmill Headrig S/N 8853. 44,000 lbs max saw strain. 11” wide wheels have heavy rims with 1-3/16” on edge of top wheel and 1-3/4" on bottom and both mounted on non-rotating arbors. Hydraulic positioned upper guide and motorized wheel lift. Cartridge pressure saw guides. Includes tilt-back upper wheel guard. Saw length is 43’-6”. Bandmill is the heaviest most productive unit built and weighs 31,000 lbs. Maximum depth of cut under upper guide at highest position is 53”. Additional capacity can be achieved with an optional column riser. Currently sitting on 17degree removeable tilted base. Max fall down is 45-1/4”. New powered clearing belt for slab removal. This is one of the best 7’ Bandmills we have seen and is capable of carriage sawing speeds over 500 feet per minute. No motor. Current new price for this bandmill from USNR is approximately $750,000. We are offering this unit for a fraction of that price, FOB, Portland, OR. Inventory No. 12500. Price, As-Is, Cleaned and Painted FOB Portland, OR ------------ $89,500.

Used McDonough 54" Tilting Rollfeed Resaw. Resaw has been reconditioned. Mechanical strain. Non-rotating upper wheel shaft with bearings mounted in wheel. Top wheel is 7/8"-thick at edge of rim and has 7-1/4"-wide face. Feedrolls driven by variable speed hydraulic motor for speeds 40-220 FPM with hydraulic power unit. Wheel drive is 50HP 440-volt motor. Maximum stock size is 18"-wide x 24"-high. Will tilt up to 15º for bevel sawing. McDonough Style Cartridge Pressure saw guides with saw spray attachments. Will either center split or gauge saw. Air-operated roll opening controlled by operator's foot pedal. Inventory No. 12409C. Price, FOB Portland, OR --------------------------$29,500.

Precision Husky 48” Horizontal Feed, Bottom Discharge, 6-Knife Wastewood Chipper. Case and disc are in very good condition with almost no wear in knife slots. Includes V-belt drive pulley. Spout is 18” X 24” and will handle 24” slab or 11” round wood. Machine weights 5,136 lbs. Shipping size 4ft. 6” wide x 5ft. 4” long x 5ft. high sitting on 4” high blocks. Inventory No. 12319. Price, FOB Portland, OR -------------------------------------------------$12,500.

One (1) Used 1991 Precision 96” Model 96.27 Horizontal Feed, Side Discharge, 4-Knife Whole Log Chipper with 8" thick disc and disc brake assembly. Serial number is C.2422. 27” maximum log diameter. Chipper has not run heavy production and appears in very good condition. Many spare parts and knives included. Weight is 35,000 lbs. Average production capacity is 125 tons per hour. Inventory No. 10238. Price, FOB Portland, OR --------------------------------$29,500.

One (1) Used Salem 6’ Right Hand Air Strain Bandmill, S/N 8564879. Was last installed as a resaw and is in very good condition. Includes pressure guides, solid top wheel with 7/8” thickness at edge of rim and 11” wide. Inventory No. 11082. Price, FOB Portland, OR ---------------------------------------$29,500.

Salem 3-Block 36" Hydraulic LP Carriage, S/N 160799-93, built in 1999. Appears in very good condition. equipped with good rail, pantograph, cant flippers, on-board Brownsville turners, center knee tong-dog, chromed face and bed plates, 13" UHMW plastic insert wheels, on 60" track centers, and 20hp Inovec hydraulic power unit. Overall carriage width is 89". Bunk spacing is 108" and 75" left to right. Overall bunks measure 200". Top of bunks to top of rail is approximately 27-1/2". No setworks computer included. Inventory No.12392. Price, FOB, Portland, OR --------------------------------------------$19,500.

One (1) Used Schurman Top Arbor 2-Saw 4” X 24” Recovery Edger complete with 12’ infeed table, outfeed picker belt, and TEFC motors. Arbor drive is 100HP. Feed rolls are 2-speed 7½HP. Currently equipped as a fixed spacing (4” nominal) machine. Can be restored to 2-shifting saw configuration. No setworks now included. Appears in good condition. See photos of Schurman Top Arbor 2-Saw 4” X 24” Recovery Edger on our web site. Inventory No. 10202P. Located at our Portland, Oregon facility. Click on link for photos. http://www.machinerysales.com/equipment.php?item=10202

Heavy Duty Panel Ripsaw. 4” X 59” capacity. 50HP Baldor 230/460V motor with quick change V-belt system, allowing arbor installation “wrench-free”. 4” Diameter arbors with heavy link belt 2-7/16” bearings. Two arbor units mounted on rolling stands. Arbors are chromed with hydrolock saw collars. Current saws are 14” diameter with 3-1/8” saw extension above collar. Current spacing is 5”. Unit could be modified to handle 60” width. Arbor has 60” long surface for saw collars. Steel infeed and outfeed rolls. See photos of Heavy Duty Panel Ripsaw on our web site. Inventory No. 11766PF. Located at our Portland, Oregon facility. Click on link for photos. http://www.machinerysales.com/equipment.php?item=11766PF