44 ft. long x 96 in. wide variable speed belt conveyor, 2HP 480V electric motor Belt is approximately 90" wide

Grapple attachment as pictured

The seller has confirmed that this Unscrambler deck is in good working/running condition. It is ready to load! - Unscrambler deck - (8) chains

This unit was blowing dust to a large baghouse in a large facility. There is also a 75 HP blower and baghouse available at the same location. Piping is available. Unit will be loaded on the truck.

Complete chip mill operation. All machinery will need to be moved from the current facility. System includes: - 29'x11' Log Deck - Emergency log Deck - 50' Log Infeed Conveyor - 57' Incline Bark Conveyor - 60' Deal Processor w/ Recycle Return Conveyor - Log Outfeed - 112' Log Recycle Conveyor - Log Outfeed - Metal Detector - Control Room - Chipper infeed - Carthage 104" 15 Pocket Chipper with 1250 HP Motor (CEM Lite Knife Hardware) - Refurbished Chipper Disc and 1250 HP Motor - Log Peel Bin - (1) 8'x16' Progress Chip Screens with 80' Chip Stacker - #1 Chip Conveyor: 500' - #2 Chip Conveyor: 1000'

10 HP Dust Fan with ductwork 230/460 volt 3-phase

Scragg Mill With Edger Cambio Debarker Precision Chipper Shaker Screen

Lumber tilt hoist that is ready to be shipped. Specs and dimensions coming!

14" chop saw with 5 stops 70" table 5HP single phase 220v electric motor

3 Belt Conveyors Available: 1. 52 ft long, 42" wide, 36" belt 2. 31 ft long, 42" wide, 38.5" belt 3. 51 ft long, 42" wide, 38.5" belt

4' x 6' Table Hand controller ____ capacity

This wood was all removed from an old mill on South Carolina. It is ready to be loaded out.

6x6" capacity 15hp 480 volts

75 HP 550 Volt 3 phase

15 HP 460 volt 3-phase 63 CFM Capacity

3 Guide Milling Machines Good Working Condition Stands Included

USNR 60,000 Board Foot Kilns (10) Available

The Vantec Wood Wast Drum Chipper is used to produce chips from logs and veneer waste. It has a roller infeed system, rubber conveyor belt and hydro-pneumatic unit to lift the rotor for maintenance. Manufacturer specs: - Width of inlet: 600 mm; - Height: 200 mm; - Rotor diameter: 600 mm; - Toothed roller: 01 upper and 02 - lower; - Grooved rollers: 01; - Rollers gear motor: GD (helical - gears); - Upper Rollers motor size: 5 hp; - Upper Rollers motor size: 5 hp; - Feed speed: 40m/min; - Number of rotor knives: 02; - Wood chip size: 30 - 40 mm; - Chipper screen: size: 65 x 65mm - Main motor 100 hp 4P: Included; Drive panel: Included; - Estimated production: 38 m3 / h (it may vary according to the type of material and time used with blade sharpening); - Infeed conveyor length: 3 500 mm (included); - Width: 1 650 mm; - Height: 1 .000 mm; - Overall length: 5800 mm; Approximate weight: 2,900 kg.

This Wood Drum chipper PT600 is used in production of wood chips from logs and veneer waste. It has a toothed roller system that allows efficient material infeed, a rubberized conveyor belt and a Hydropneumatic unit to lift the rotor cover for maintenance. It comes with 01 chipper Knife set and 01 nose bar set. It does not come with the output conveyor. - Width of inlet: 600 mm; - Height: 300 mm; - Rotor diameter: 800 mm; - Toothed roller: 01 upper and 01 lower; - Grooved rollers: 01; - Rollers gear motor: GD (helical gears); - Metal detector: Flat model; - Rollers motor size: 5 hp (2x); - Number of rotor knives: 02; - Wood chip size: 25 - 40 mm; - Main motor 125 hp 4P: Included; - Drive panel: Included; - Lead Time: 240 Days; - Estimated production: 55 m3 / h (it may vary according to the type of material and time used with blade sharpening); - Infeed conveyor length: 3 500 mm (included); - Width: 1 850 mm; - Height: 1 .150 mm; - Overall length: 6 700 mm; - Approximate weight: 4,900 kg.

This Wood Drum chipper PT750 is used in production of wood chips from logs and veneer waste. It has a toothed roller system that allows efficient material infeed, rubberized conveyor belt and Hydropneumatic unit to lift the rotor cover for maintenance. It comes with 01 chipper Knife set and 01 nose bar set. It does not come with the output conveyor. Width of inlet: 750 mm; • Height: 300 mm; • Rotor diameter: 800 mm; • Toothed roller: 03 upper and 03 lower; • Grooved rollers: 01; • Rollers gear motor: GD (helical gears); • Upper Rollers motor size: 7,5 hp (2x); • Feed speed: 35 m/min; • Number of rotor knives: 02; • Wood chip size: 25 - 40 mm; • Chipper screen: size: 70x 70mm; • Main motor 200 hp 4P: Included; • Drive panel: Included; • Estimated production: 65 m3 / h (it may vary according to the type of material and time used with blade sharpening); • Lead Time: 240 Days • Infeed conveyor length: 3 500 mm (included); • Width: 2 500 mm; • Height: 1.250 mm; • Overall length: 7 300 mm; • Approximate weight: 8 750 kg.