2020 Rotochopper B66T Track Horzontal Grinder, Cat C27 with 4741 hours, Radio Remote, Dolly transport system, New high wear Infeed, new upper anvil plates, Colorizer, One owner, One operator, Serviced and ready to grind. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1987 Screen Machine 30D46-2 with new rebuilt Lister Petter engine with 1,500 hours. Comes with 40’ stacker, new starter, has Grizzly pintle hitch, screens 400 yds a day of dry material. It’s a complete machine. Transport dimensions Weight 14,590 lb Height 12'9" Length 47'4" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Terex TBG 640 Horzontal Grinder with 210 original hours. NEEDS ENGINE it was a Cat C18. The mill takes Morbark 1300 hammers and tips, pumps are there, 210 original hours on the machine. Weight 82,000 lbs Length 43' Width 8' 3" Height 13' 3" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2023 Tigercat 6900 Track Horzontal Grinder, Cat C32 1200HP with 1300 hours, 5 Year / 6000 Hour Engine Warranty, Radio Remote, Magnetic Head Pulley, Work Ready! Length: 638 in Width: 122 in Height: 196 in Transport height: 144 in Weight: 95,000 lb

1988 Trelan Model 18 Whole Tree Chipper Equipped with Detroit 518 Diesel Engine, Engine Hours Unknown, New Drive Chain and New Belt, New Tire, No Separator Ready for the Woods... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Trelan 23RC Whole Tree Chipper, 3 knife, Cat V12 with 5,000 hours, New clutch and disk bearings. Works as it should. Approximately 5k hours makes a beautiful chip. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Vermeer TG9000 13’ Tub Grinder, Cat 3412E 860hp with 8900 hours, Heads and rebuilt done at 6500 hours. Width 46 ft Width 11.9 ft Height 165 in Weight 106,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2009 Vermeer HG 6000TX Track Horizontal Grinder, with 10,341hours on a Cat C-18, 630HP Engine. $150k worth of repairs less then 300hours ago. Strong running, good machine. Receipts and list of new parts available for serious buyers only. New Infeed conveyor, chain, and roller New idler roller bearing New infeed wear strips New hammer feed drive belts New anvil bars New shear edge and cutters New mill seat new tail belt New roller lock cylinder and more Weight: 75,000 lbs Transport length: Maximum of 37.3 ft Transport width: Maximum of 9.2 ft Transport height: Maximum of 148 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Vermeer TR-5300 Trommel Screen, 2,200 Hours on Engine, New Sprockets and New Drive Chains, In excellent condition. Ready for Work. Weight 32,000 lbs Width (transport): 8.2 ft Length (transport): 39 ft Height (transport): 13.4 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Vermeer TR626 Wildcat Trommel Screen with 12,500 hours. Weight: 47,500 lbs Width: 102 in (8 ft 6 in) Height: 13 ft 4 in Length: 49 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2020 Vermeer BC1800 XL Chipper, Machine has 2000 Hours, One Owner, Hydraulic Winch, Autofeed System, 173 HP 6 Cylinder Turbo Engine, DEF Engine, Well Maintained Machine Ready for Work. Length: 177” Height: 110” Width: 80” Weight 9,270 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Woodsman 337-FC Chipper with 900 Hours, Cat 540 HP Motor, All Factory Updates have been Completed. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2022 ASV Supertrak SK190TR w/ Shearex mulching head. 190 HP Cummins Engine with 363 hours. High Flow Hydraulics and A/C. Weight: 13,000 lbs Height. 90” Width. 78” Length: 163” Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2023 Bandit SG40 WALK BEHIND Stump Grinder with only 41 hours. Features an aggressive cutter wheel drive system, enhanced operator visibility, and enhances stability. Operator controls are mounted on a 3-poisiton console. Two joysticks control the travel of the unit, while a single, easy to use joystick controls all cutter wheel functions. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2011 Bandit Beast Model 3680, Caterpillar Model C-18 765 HP Turbo Diesel with Only 2,300 Original Hours , Magnetic Head Pulley on Discharge Conveyor, , Air Compressor, Wireless Remoter Control,and Tether Cord Control, Autofeed Reverse System, Tri-Axle Unit with Hydraulic Tongue Jack with Air Brakes... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Bandit 2550 Self Propelled Stump Cutter with Deutz 44 HP Diesel Engine, 1,450 Hours, Tether Cord Remote and Wireless Control, Dual Rear Wheels, Hydraulic Swing Speed, Two Speed Drive, Front Grading Blade, Ready for Work. Width: 35” (89cm) Height: 53” (135cm) Length: 120” (305cm) WEIGHT: Approximately 820kg Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Bandit Beast 4680 Track Horizontal Grinder, Equipped with a Tier 2 CAT C-27 1050 HP Turbo Diesel Engine with 3,500 Hours, Reverse Fan ,Compressor , Magnetic Pulley Head on Shorter Length Discharge Chute , Additional Screens all sizes, Undercarriage 95% Wireless Remote Control with Tether Cord Electric Winch for screen installation... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Bandit Model 4680 Horizontal Grinder, Tri Axle Machine, Cummins 1000 HP Engine, Hours Unknown, Will have hours soon, Radio Remote Control, 4 " and New 2" Screens for Regrind. Length: 36’ Width: 10’ 11” Height: 13’4” Weight: 93,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2020 Bandit 1425 Horzontal Grinder, Cat 120hp with 81 hours, Radio Remote, Magnetic Pulley, Extra Parts, Excellent Condition. Weight 12,500 lbs Width 98 in Height 120 in Length 288 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Bandit 4680 Beast Recycler, Cat 3412 1,000hp with 6,000 hrs, 30 Tooth Mill, Radio Remote, Magnetic Head Pulley Length: 36’ Width: 10’ 11” Height: 13’4” Weight: 93,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.