336-269-2284
WELCOME and thank you for visiting our website. Ligna Machinery has been meeting the needs of the Wood Products Industry for more than 50 years. We provide new, used and reconditioned machinery. Ligna Machinery is the exclusive USA representative for both MEBOR and JOCAR, European manufacturers of high quality and unique band mill equipment for both sawmills and pallet producers. Equipment located Biscoe, NC, mill site or factory. We broker machinery for other owners.
69 Results Found
336-269-2284
$800
RADICON gear reducer: 100:1; 5 HP. Price $800.00. As-is/where-is. (Inv. # G-15).
$900
RELIANCE gear reducer: 40:1 ratio; 5 HP. Price $900.00. As-is/where-is. (Inv. # G-12).
$5,000
SALEM operator's cab; approximately 5' wide x 10' long x 8-1/2' tall; with seat and A/C on top (adds 18" to height); no window on one side; rear entry, 30" door. Offered as-is/where-is, as removed from service. No warranties or guaranties. Price $5,000.
$35,000
8" x 54" SALEM, bottom arbor, combination gang-edger. Center section only. Split machine. New solid feed rolls-chromed and knurled. New top press rolls-smooth-split 33" and 15" wide. (4) new 5" bore cylinders for press rolls. 3 7/16", double keyed, saw mandrel. Hydraulic feed. Saw shifting device outside of frame but no saws or collars but with shifting arms. 3 sets rubber cushions on press rolls. All sprockets are new with hydraulic drive. No infeed or outfeed. 125 HP motor included. No plumbing or electric wiring. New bearings on feed rolls. 20HP hydraulic power unit. Machine mounted on 6" beam. Price $35,000.00
$12,000
36" SALEM carriage with NO setworks but with 'Cam' box. ADD YOUR OWN SETWORKS. 60' rail included; 4 sets of wheels-good condition; 3 headblocks spaced 72" & 60" on centers; cant pushers; topdog; frame 16' OAL. Headblocks-good condition. Price $12,000.00
$27,000
SALEM 62" Linebar Resaw complete with 125 HP motor and drive, roller infeed with slab turners; linebar section with two press roll arms operated by SILVATECH linear cylinder with setworks; resaw is weight strain type-older machine but in good condition, electric screw for raising and lowering guide; outfeed with transfer; cross-transfer with slab dump; return roller conveyor; 3 strand transfer back to infeed. Machine has been setting in present location approximately 6 years. SYSTEM MUST BE REMOVED FROM PRESENT LOCATION.
$1,200
SEW gear reducer: 130:1 ratio; 10 HP. Price $1,200.00. As-is/where-is. (Inv. # G-9).
$1,200
SEW gear reducer: 121:1 ratio; 10 HP; UNUSED. Price $1,200.00. As-is/where-is. (Inv. # G-8).
SEW gear reducer: 100:1 ratio; 16 HP. Price $900.00. As-is/where-is. (Inv. # G-7).
$2,400
SODERHAMN 5' X 5' rotary chip screen with drive (no motor) and 1.25" top screen plates, bottom screen is solid plate. Offered as-is-/ where-is.
48" SODERHAMN/PRECISION chipper. HFVD; 6 knife; standard 14 3/4" knife length; pockets in good condition; 12" round discharge; 3 fan blades; 11" round wood capacity x 26" diagonal length.
Call for Price
ASSORTED MOTORS, IN ALL HP & SPEEDS AVAILABLE. Chipper and band mill motors 400HP, US, 585 RPM, DRIP, FRAME 1689S. TOSHIBA 200 HP at 1200 RPM. General Electric 300 HP, 514 RPM, 460 Volt for direct connect, Old style GE frame 17A's and 17B's to redesign up to 500 HP @ 450 RPM. 300HP ALLIS CHALMERS MOTOR 514 RPM, DRIP, 30KS8 FRAME. Many other sizes available CALL FOR YOUR SPECIFIC NEED. From 10HP to 600HP. See gear reducers with various HPs and ratios (see Gear Reducer listings).
TYRONE-BERRY Carriage feed, model 230 good condition with 125 HP motor on Hydraulic system and drum section. Drum has 20" x 20" face and grooved for 3/4" cable.
TYRONE-BERRY carriage feed, Model SMA 230, with 75 HP electric motor and drum package. Offered as/is where/is. Price $4,500.00
$26,500
UKIAH 8" x 66" wide gang saw. (8) 6" knurled and chromed bottom feed rolls, 2-15/16" shafts; (3) 8" knurled & chromed top feed rolls, 2-15/16" shafts, powered; 1-1/4" thick side plates; Rex ZBR type bearings; all sprockets in good condition; 3-15/16" outboard bearings and floored platform for drive; attached to main arbor by extra heavy duty universal joint system; door on right; drive system on left; clam-shell opening with both cylinders; (2) 10 HP motors for 2 speed drive system; approximate base size 9'6" x 12'6"; no infeed or outfeed or main electric motors. $26,500 OBO.
$26,500
UKIAH 8" x 66" wide gang saw. (8) 6" knurled and chromed bottom feed rolls, 2-15/16" shafts; (3) 8" knurled & chromed top feed rolls, 2-15/16" shafts, powered; 1-1/4" thick side plates; Rex ZBR type bearings; all sprockets in good condition; 3-15/16" outboard bearings and floored platform for drive; attached to main arbor by extra heavy duty universal joint system; door on right; drive system on left; clam-shell opening with both cylinders; (2) 10 HP motors for 2 speed drive system; approximate base size 9'6" x 12'6"; no infeed or outfeed or main electric motors. $26,500 OBO.
$6,000
2 PLANER mill belts approximately 12' long x 18" wide belts: variable speed drives. One has adjustable legs. Heavy frames and in very good condition. As-is/where-is loaded on your truck.
$2,800
140' of used, heavy duty, #480 drag chain with wings. Rusty, but in real good condition--has been stored outside. 8" Pitch, ultimate strength 102,000 lbs., side bar height 2", overall width 14.5". Chain is in baskets. To be picked up in Biscoe, NC. Chain sold as is /where is. Price $20.00 per foot or $2,800.00 for all the chain.
$5,500
28' Sorting chain conveyor, 3'centers, 81X chain, electric drive. Price $5,500.00
$500
US gear reducer: variable speed; 5 HP. Price $500.00. As-is/where-is. (Inv. # G-14).