336-269-2284
WELCOME and thank you for visiting our website. Ligna Machinery has been meeting the needs of the Wood Products Industry for more than 50 years. We provide new, used and reconditioned machinery. Ligna Machinery is the exclusive USA representative for both MEBOR and JOCAR, European manufacturers of high quality and unique band mill equipment for both sawmills and pallet producers. Equipment located Biscoe, NC, mill site or factory. We broker machinery for other owners.
69 Results Found
336-269-2284
58? MORBARK 3 knife chipper; horizonal feed-top discharge; box-type fan blades; fair to good condition. Machine has been patched but well done. Chipper sheave and blow pipe included. PRICE: $8,200. OBO
$28,900
NEWMAN Trimmer System. Model KNO 24. Will trim 8' to 16' with adjustable '0' saw. Trimmer includes 7.5 HP motors on each saw with aluminum wheel hold downs; saw blades; chain type waste conveyor in trimmer; electric variable speed feed chains. System includes: 5 strand lumber deck with 81X chain by 13' long with lumber stops; 4 strand tipple to discharge boards when raised; 6' x 5 strand board dealer with 5 dealer wheels to feed boards to trimmer; 25' long x 30" wide lumber belt under tipple; 30' x 24" waste belt from trimmer waste chain. NOTE: Equipment loaded on your truck and located in Biscoe, NC. Price $28,900.00. OBO
PHILADELPHIA gear reducer: 40:1 ratio; 6 HP. Price $800.00. As-is/where-is. (Inv. # G-13).
$23,000
Heavy duty PRECISION rosser head type debarker model 848H with 7 sets of bull wheels, overall length approximately 45’, operator’s cab with controls, 4 7/16” bull wheel shafts, head included but not mounted on machine, heavy duty model with 12” I-beam frame and includes barn sweep in the bottom of the debarker. Hydraulic system and bull wheel drive is powered by a 25HP electric motor. Price as is/where is with no warranties or guaranties……Price $23,000.00 OBO. As is where is $23,000.
PROGRESS 60", 6 knife chipper, Serial # 1152, horizontal feed, bottom discharge, fair to good condition (top hood has welded places). As-is $9,400 OBO.
Call for Price
TWO (2)150 HP QUINCY ROTARY SCREW AIR COMPRESSORS MODEL # 740B S/N: 800170; AND MODEL # 650H S/N: 73861. Service center tested and ready to go.
$800
RADICON gear reducer: 100:1; 5 HP. Price $800.00. As-is/where-is. (Inv. # G-15).
$900
RELIANCE gear reducer: 40:1 ratio; 5 HP. Price $900.00. As-is/where-is. (Inv. # G-12).
$5,000
SALEM operator's cab; approximately 5' wide x 10' long x 8-1/2' tall; with seat and A/C on top (adds 18" to height); no window on one side; rear entry, 30" door. Offered as-is/where-is, as removed from service. No warranties or guaranties. Price $5,000.
$35,000
8" x 54" SALEM, bottom arbor, combination gang-edger. Center section only. Split machine. New solid feed rolls-chromed and knurled. New top press rolls-smooth-split 33" and 15" wide. (4) new 5" bore cylinders for press rolls. 3 7/16", double keyed, saw mandrel. Hydraulic feed. Saw shifting device outside of frame but no saws or collars but with shifting arms. 3 sets rubber cushions on press rolls. All sprockets are new with hydraulic drive. No infeed or outfeed. 125 HP motor included. No plumbing or electric wiring. New bearings on feed rolls. 20HP hydraulic power unit. Machine mounted on 6" beam. Price $35,000.00
$12,000
36" SALEM carriage with NO setworks but with 'Cam' box. ADD YOUR OWN SETWORKS. 60' rail included; 4 sets of wheels-good condition; 3 headblocks spaced 72" & 60" on centers; cant pushers; topdog; frame 16' OAL. Headblocks-good condition. Price $12,000.00
$27,000
SALEM 62" Linebar Resaw complete with 125 HP motor and drive, roller infeed with slab turners; linebar section with two press roll arms operated by SILVATECH linear cylinder with setworks; resaw is weight strain type-older machine but in good condition, electric screw for raising and lowering guide; outfeed with transfer; cross-transfer with slab dump; return roller conveyor; 3 strand transfer back to infeed. Machine has been setting in present location approximately 6 years. SYSTEM MUST BE REMOVED FROM PRESENT LOCATION.
$1,200
SEW gear reducer: 130:1 ratio; 10 HP. Price $1,200.00. As-is/where-is. (Inv. # G-9).
$1,200
SEW gear reducer: 121:1 ratio; 10 HP; UNUSED. Price $1,200.00. As-is/where-is. (Inv. # G-8).
SEW gear reducer: 100:1 ratio; 16 HP. Price $900.00. As-is/where-is. (Inv. # G-7).
$2,400
SODERHAMN 5' X 5' rotary chip screen with drive (no motor) and 1.25" top screen plates, bottom screen is solid plate. Offered as-is-/ where-is.
48" SODERHAMN/PRECISION chipper. HFVD; 6 knife; standard 14 3/4" knife length; pockets in good condition; 12" round discharge; 3 fan blades; 11" round wood capacity x 26" diagonal length.
Call for Price
ASSORTED MOTORS, IN ALL HP & SPEEDS AVAILABLE. Chipper and band mill motors 400HP, US, 585 RPM, DRIP, FRAME 1689S. TOSHIBA 200 HP at 1200 RPM. General Electric 300 HP, 514 RPM, 460 Volt for direct connect, Old style GE frame 17A's and 17B's to redesign up to 500 HP @ 450 RPM. 300HP ALLIS CHALMERS MOTOR 514 RPM, DRIP, 30KS8 FRAME. Many other sizes available CALL FOR YOUR SPECIFIC NEED. From 10HP to 600HP. See gear reducers with various HPs and ratios (see Gear Reducer listings).
TYRONE-BERRY Carriage feed, model 230 good condition with 125 HP motor on Hydraulic system and drum section. Drum has 20" x 20" face and grooved for 3/4" cable.
TYRONE-BERRY carriage feed, Model SMA 230, with 75 HP electric motor and drum package. Offered as/is where/is. Price $4,500.00