2008 Ponsse Elephant Forwarder with 20,700 hours. Weight 50,260 lbs Length: 400–436 in Width: 118–130 in Height: 157 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Ponsse Ergo (8 Wheel) Processor Equipped with a Mercedes 270 HP Engine with 12,500 Hours, C-4 Crane, H7 Processor Head, Enclosed cab with Heat and AC, Wabasto Pre Heater, 710 Tires around,90% on Tracks, 1 set aggressive, other standard tracks, Good Diffs, Boggies and Drivebox, Fire Suppression, 30 Day Parts Warranty. Ready for the Woods..... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2011 Ponsse Ergo Processor, Includes a H-7 Head purchased from Ponsee, 13,500 Hours on Machine, Machine was refurbished with 3 pages of information, Good Center Section and Tires, Enclosed Cab with Heat and AC, Well Maintained, Tracks Front and Rear. Operating Weight 35,274 lb Shipping Length - Non Tilt 25.2 ft in Overall Width 9.32 ft in Height To Top Of Cab 12.37 ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Ponsse Ergo, H73E Harvester with 22,000 hours, Dry machine, Computer does not work. Operating Weight 35,274 lbs Height - Top of Cab 12.4 ft Overall Width 9.4 ft Shipping Length - non tilt 25.2 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Ponsse Ergo Processor, H7 Processor, Machine has 17,600 Hours, Main Wiring Harness Replaced, Engine Computer,is New, New Injectors, New Rotator, New Lower Knives, New Water Pump, New Cam Sensor, Enclosed Cab with Heat and AC, New Lower Section on valve bank replaced, Ready for the Woods. Operating Weight 35,274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Ponnse Ergo Processor, 13,000 Hours on the Engine Mercedes 270 HP Engine, C-4 Crane and H-7 Processor Head, 1000 Hours on Remaned Engine, Outer Boom Chains Replaced New Crane Bearing, Enclosed Cab with Heat and AC, Tracks available Ready for the Woods. Operating Weight 35274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2003 Ponsse Ergo Harvester, H73 Processing Head, Enclosed Cab with Heat and Air Conditioning, Center Section is Tight,Has Chains on Front, No Tracks, Well Maintained Machine, More Pictures coming soon, Ready for the Woods. Operating Weight 35,274 lbs Height - Top of Cab 12 ft Overall Width 9 ft Shipping Length - non tilt 25 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Ponsse Ergo Harvester, H7 Processor Head, 13,000 Hours, Machine has Enclosed Cab with Heat and Air Conditioning, Good Centers Tracks on Rear, More Pictures Coming Soon Operating Weight 35,274 lbs Height - Top of Cab 12 ft Overall Width 9 ft Shipping Length - non tilt 25 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 Ponsse Ergo Harvester ONLY 4800 Original Hours, C-5 Crane, 710 Tires, Tracks are 25%, All pump shafts are being sealed, Enclosed Cab with Heat and Air conditioning, Ready for the Woods Length 25.2ft in Width 9.32ft in Height 12.37ft in Weight 35,274 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Ponsse Ergo Harvester with 17.800 hours and a Ponsse H7 Head. This machine has just been fully serviced. Weight 35,274lb Length 25.2ft in Width 9.32ft in Height 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 Ponsse Wisent Forwarder with 12,500 Hours 8,5 m Crane Weight 31,085.2lb Length 29.7ft in Width 9.32ft in Height 12.14ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1998 Prentice 210D Log Loader, No Delimber, Machine is reading 5000 Hours, New Fuel Pump, Center Section is Tight and Dry, Good Tires, Ready for the Woods. Length 40 ft 0 in Width 9 ft 2 in Height 13 ft 0 in Weight 34,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Rotobec grapple Model 5052 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Rottne F-15 Forwarder, Hours 18.300 Hours, One Set of Tracks, Enclosed Cab with Heat and Air Conditioning, Decent Tires, Ready for the Woods Weight: 41,225 lbs Width: 114 in Length: 387 in Height: 150.5 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Rottne F15D 8 Wheel Forwarder, One New Set of Eco-Tracks, One Set of Chains, Espar Heat, Enclosed Cab Heat, Air and Radio, Engine has 7,500 Hours, NO DEF, Good Center Section Tight, Ready For the Woods. Width: 114 in Length: 387 in Transportation height: 150.5 in Service weight: 41,225 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1998 Rottne SMV with Processor Head, RG81 Crane ,Engine Hours Reading 11.000 Hours, Rebuilt Hydraulic Pump, Enclosed Cab with Heat and Air Conditioning, Good Tires, One Set of Tracks Good Centers Operating Weight - 38,580.9 lb Length 31.5ft in Width Over Tires 9.45ft in Height To Top Of Crane 12.14ft in Ground Clearance 2.25ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Tigercat X822C Feller Buncher with 11,000 hours, 5702 Hotsaw, New undercarriage, New front window, New saw drive pump and motor, Changed most of the hydraulic hoses, Runs and operates good. Weight:52,000 lbs Length:14.59 ft Width:10.93 ft Height:10.93 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Tigercat L870C Feller Buncher, Equipped with a Tigercat 5802 Head with 360 Degree, 14,000 Hours Enclosed Cab with Heat and Air Conditioning, Fire Suppression, New Saw Motor, One new grab arm, All New Cylinders, New Hoses, 1 New Final Drive Motor, Newer Engine Pump, New OEM, Undercarriage is Good, Ready for the Woods Operating Weight W/O Attachment 66,870 lb Overall Length 18.18ft in Overall Width 10.83ft in Height To Top Of Cab 10.83ft in Ground Clearance 2.33in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Tigercat 860C Feller Buncher, 22" Saw Head is a Tigercat 5702 with 40-degree lateral Tilt. Only 7500 Hours, Pre DEF Engine, 60 % Undercarriage, Enclosed Cab with Heat and Air Conditioning, Fire Suppression, Non-Leveling Cab Overall Length 17.66ft in Overall Width 10.75ft in Height To Top Of Cab 10.83ft in Ground Clearance 2.33in Tail Swing Radius 4.75ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.